wire-wound chip inductors - open ctparts.com ver. 8.3 manufacturer of inductors, chokes, coils, beads, transformers & toroids 800-684-5322 inside us 949-453-1811 outside us copyright ? 2003 by ct magnetics, dba central technologies. all rights reserved. ct magnetics reserves the right to make improvements or change specifications without notice central technologies 116 09.23.02 size a b c d e f g max. max. max. mm 2.29 1.73 1.52 1.27 0.51 1.02 0.51 inches 0.090 0.068 0.060 0.050 0.020 0.040 0.020 physical dimensions specifications l test q q test srf dcr rated part inductance freq. fact. freq. typ. max. dc number (nh) (mhz) min. (mhz) (mhz) ( ? ? ) (ma) ct0805ls-331_ 330 100 35 100 630 0.60 400 ct0805ls-391_ 390 100 35 100 580 0.66 350 ct0805ls-471_ 470 100 35 100 530 0.72 300 ct0805ls-561_ 560 25 35 25 520 0.81 280 ct0805ls-681_ 680 25 30 25 360 0.86 250 ct0805ls-821_ 820 25 30 25 300 0.92 240 ct0805ls-911_ 910 25 28 25 280 0.98 240 ct0805ls-102_ 1000 7.9 26 7.9 260 1.08 250 ct0805ls-122_ 1200 7.9 26 7.9 210 1.13 220 ct0805ls-152_ 1500 7.9 25 7.9 200 1.73 200 ct0805ls-182_ 1800 7.9 23 7.9 160 2.15 180 ct0805ls-222_ 2200 7.9 22 7.9 150 2.40 130 ct0805ls-272_ 2700 7.9 10 7.9 220 2.75 120 ct0805ls-332_ 3300 7.9 10 7.9 190 2.95 100 ct0805ls series from 330 nh to 3,300 h not shown at actual size. characteristics description: smd shielded wire-wound chip inductor applications: lc resonant circuits such as oscillator and signal generators, impedance matching, circuit isolation, rf filters, disk drives and computer peripherals, audio and video equipment, tv, radio and telecommunication equipment operating temperature: -40c to +85c inductance tolerance: 5%, 10% & 20% testing: inductance and q tested on an hp4287a at specified frequency. packaging: tape & reel marking: parts are marked with inductance code and tolerance miscellaneous: additional values available additional information: additional electrical & physical information available upon request samples available. see website for ordering information. please specify tolerance code when ordering. ct0805ls-331_ j = 5%, k = 10%, m = 20% pad layout
|