View PS2561AL-1Y-F3-A_7072338.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2003, 2009 the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. description the ps2561a-1 is an optically coupled isolator containing a gaas light emitting diode and an npn silicon phototransistor to realize an excellent cost performance. the ps2561a-1 is in a plastic dip (dual in-line package) a nd the ps2561al-1 is lead bending type (gull-wing) for surface mount. the ps2561al1-1 is lead bending l1 type and the ps2561al2-1 is lead bending l2 type (gull-wing). features ? high isolation voltage (bv = 5 000 vr.m.s.) ? ordering number of taping product: ps2561al-1-e3, e4, f3, f4 : ps2561al2-1-e3, e4 ? pb-free product ? safety standards ? ul approved: no. e72422 ? csa approved: no. ca 101391 (ca5a, can/csa-c22.2 60065, 60950) ? bsi approved: no. 7112, 7420 ? semko approved: no. 901309 ? nemko approved: no. p03100141 ? demko approved: no. 314869 ? fimko approved: no. fi 24820 ? din en60747-5-2 (vde0884 part2) approved: no. 40008862 (option) applications ? power supply ? telephone/fax. ? fa/oa equipment ? programmable logic controller 1. anode 2. cathode 3. emitter 4. collector pin connection (top view) 12 43 data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. photocoupler ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1 high isolation voltage single transistor type multi photocoupler series ? nepoc series ? document no. pn10222ej07v0ds (7th edition) date published may 2009 ns printed in japan
package dimensions (unit : mm) dip type long creepage distance lead bending type (gull-wing) long creepage distance (gull-wing) photocoupler construction parameter unit (min.) air distance 7 mm outer creepage distance 7 mm inner creepage distance 4 mm isolation thickness 0.4 mm ps2561a-1 3.50.3 4.150.4 3.20.4 2.54 1.250.15 0.500.10 0.25 m 4.60.35 6.50.5 0 to 15 7.62 0.25 +0.1 ?0.05 1 2 4 3 ps2561al1-1 0 to 15 0.25 +0.1 ?0.05 10.16 2.54 0.25 m 0.500.1 1.250.15 3.85 0.4 3.15 0.35 3.5 0.3 6.50.5 4.60.35 1 2 4 3 ps2561al-1 0.25 m 4.60.35 6.50.5 3.50.3 2.54 1.250.15 0.15 0.90.25 9.600.4 0.25 +0.1 ?0.05 0.1 +0.1 ?0.05 1 2 4 3 ps2561al2-1 0.25 m 0.25 2.54 1.250.15 3.50.3 6.50.5 4.60.35 11.8 +0.2 ?0.5 0.25 +0.1 ?0.05 0.250.2 0.90.25 10.16 1 2 4 3 data sheet pn10222ej07v0ds 2 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
marking example 2561a nj931 assembly lot week assembled year assembled (last 1 digit) in-house code ctr rank code no. 1 pin mark n 9 31 j j package new pkg made in japan made in taiwan k r new pkg pb-free pb-free and halogen free *1 y *1 special version data sheet pn10222ej07v0ds 3 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps2561a-1 ps2561a-1-a pb-free m agazine case 100 pcs standard products ps2561a-1 ps2561al-1 ps2561al-1-a (ul, csa, bsi, ps2561al1-1 ps2561al1-1-a nemko, demko, ps2561al2-1 ps2561al2-1-a semko, fimko ps2561al-1-e3 ps2561al-1-e3-a embossed tape 1 000 pcs/reel approved) ps2561al-1-e4 ps2561al-1-e4-a ps2561al-1-f3 ps2561al-1-f3-a embossed tape 2 000 pcs/reel ps2561al-1-f4 ps2561al-1-f4-a ps2561al2-1-e3 ps2561al2-1-e3-a embossed tape 1 000 pcs/reel ps2561al2-1-e4 ps2561al2-1-e4-a ps2561a-1-v ps2561a-1-v-a m agazine case 100 pcs din en60747-5-2 ps2561al-1-v ps2561al-1-v-a (vde0884 part2) ps2561al1-1-v ps2561al1-1-v-a approved (option) ps2561al2-1-v ps2561al2-1-v-a ps2561al-1-v-e3 ps2561al-1-v-e3-a embossed tape 1 000 pcs/reel ps2561al-1-v-e4 ps2561al-1-v-e4-a ps2561al-1-v-f3 ps2561al-1-v-f3-a embossed tape 2 000 pcs/reel ps2561al-1-v-f4 ps2561al-1-v-f4-a ps2561al2-1-v-e3 ps2561al2-1-v-e3-a embossed tape 1 000 pcs/reel ps2561al2-1-v-e4 ps2561al2-1-v-e4-a ps2561a-1 ps2561a-1y-a special version m agazine case 100 pcs standard products ps2561a-1 ps2561al-1 ps2561al-1y-a (pb-free and (ul, csa, bsi, ps2561al1-1 ps2561al1-1y-a halogen free) nemko, demko, ps2561al2-1 ps2561al2-1y-a semko, fimko ps2561al-1-f3 PS2561AL-1Y-F3-A embossed tape 2 000 pcs/reel approved) ps2561al2-1-e3 ps2561al2-1y-e3-a embossed tape 1 000 pcs/reel ps2561a-1-v ps2561a-1y-v-a m agazine case 100 pcs din en60747-5-2 ps2561al-1-v ps2561al-1y-v-a (vde0884 part2) ps2561al1-1-v ps2561al1-1y-v-a approved (option) ps2561al2-1-v ps2561al2-1y-v-a ps2561al-1-v-f3 ps2561al-1y-v-f3-a embossed tape 2 000 pcs/reel ps2561al2-1-v-e3 ps2561al2-1y-v-e3-a embossed tape 1 000 pcs/reel *1 for the application of the safety standar d, following part number should be used. data sheet pn10222ej07v0ds 4 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode reverse voltage v r 6 v forward current (dc) i f 30 ma power dissipation derating p d / c 1.5 mw/ c power dissipation p d 150 mw peak forward current *1 i fp 0.5 a transistor collector to emitter voltage v ceo 70 v emitter to collector voltage v eco 5 v collector current i c 30 ma power dissipation delay p c / c 1.5 mw/ c power dissipation p c 150 mw isolation voltage *2 bv 5 000 vr.m.s. operating ambient temperature t a ? 55 to +100 c storage temperature t stg ? 55 to +150 c *1 pw = 100 s, duty cycle = 1% *2 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output pins 1-2 shorted together, 3-4 shorted together. data sheet pn10222ej07v0ds 5 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 10 ma 1.2 1.4 v reverse current i r v r = 5 v 5 a terminal capacitance c t v = 0 v, f = 1.0 mhz 10 pf transistor collector to emitter dark current i ceo v ce = 70 v, i f = 0 ma 100 na coupled current transfer ratio (i c /i f ) *1 ctr i f = 5 ma, v ce = 5 v 50 400 % collector saturation voltage v ce (sat) i f = 10 ma, i c = 2 ma 0.13 0.3 v isolation resistance r i-o v i-o = 1.0 kv dc 10 11 isolation capacitance c i-o v = 0 v, f = 1.0 mhz 0.4 pf rise time *2 t r v cc = 10 v, i c = 2 ma, r l = 100 3 s fall time *2 t f 5 *1 ctr rank n : 50 to 400 (%) h : 80 to 160 (%) q : 100 to 200 (%) w : 130 to 260 (%) l : 200 to 400 (%) *2 test circuit for switching time v cc v out i f r l = 100 50 input output in monitor pw = 100 s duty cycle = 1/10 90% 10% t r t d t f t s t on t off data sheet pn10222ej07v0ds 6 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
typical characteristics (t a = 25 c, unless otherwise specified) 200 150 100 50 0 25 50 75 100 125 1.5 mw/ c diode power dissipation p d (mw) ambient temperature t a ( c) diode power dissipation vs. ambient temperature 200 150 100 50 0 25 50 75 100 125 1.5 mw/ c transistor power dissipation p c (mw) ambient temperature t a ( c) transistor power dissipation vs. ambient temperature 100 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 50 10 5 1 0.5 0.1 0 c ?25 c ?55 c +60 c +25 c t a = +100 c forward current i f (ma) forward voltage v f (v) forward current vs. forward voltage 0.05 collector to emitter dark current i ceo (na) ambient temperature t a ( c) collector to emitter dark current vs. ambient temperature 1 10 100 1 000 10 000 0 25 50 75 100 v ce = 70 v v ce = 24 v collector current i c (ma) collector to emitter voltage v ce (v) collector current vs. collector to emitter voltage 25 10 20 02 46 8 15 5 10 i f = 1 ma i f = 2 ma i f = 5 ma i f = 10 ma collector saturation voltage v ce (sat) (v) collector current vs. collector saturation voltage collector current i c (ma) 0.1 1 10 0 0.2 0.4 0.6 0.8 1.0 i f = 1 ma i f = 2 ma i f = 5 ma i f = 10 ma remark the graphs indicate nominal characteristics. data sheet pn10222ej07v0ds 7 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
normalized to 1.0 at t a = 25 c, i f = 5 ma, v ce = 5 v ambient temperature t a ( c) normalized current transfer ratio ctr normalized current transfer ratio vs. ambient temperature 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 ? 50 ? 25 0 25 50 75 100 ctr:270% ctr:130% load resistance r l ( ) switching time t ( s) switching time vs. load resistance 0.1 1 10 100 10 100 1 000 10 000 t f t r t d t s i c = 2 ma, v cc = 10 v, ctr = 216% frequency f (khz) normalized gain g v frequency response r l = 1 k 300 100 i f = 5 ma, v ce = 5 v 5 0 ? 5 ? 10 ? 15 ? 20 ? 25 0.1 1 10 100 1 000 load resistance r l (k ) switching time vs. load resistance switching time t ( s) 1 10 100 1 000 1 10 100 t r t d t s t f i f = 5 ma, v cc = 5 v, ctr = 216% t a = 25?c t a = 60?c i f = 5 ma (typ.) 1.2 1.0 0.8 0.6 0.4 0.2 0 10 2 10 3 10 4 10 5 time (hr) ctr (relative value) long term ctr degradation 10 t a = 25 c t a = 60 c 1.2 1.0 0.8 0.6 0.4 0.2 0 10 2 10 3 10 4 10 5 10 forward current i f (ma) current transfer ratio ctr (%) current transfer ratio vs. forward current 0 50 150 100 200 250 300 350 400 0.01 0.1 1 10 100 v ce = 5 v, n = 5 b c sample a d e remark the graphs indicate nominal characteristics. data sheet pn10222ej07v0ds 8 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
taping specifications (unit : mm) tape direction outline and dimensions (tape) outline and dimensions (reel) packing: 1 000 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 ps2561al-1-e3 ps2561al-1-e4 1.550.1 2.00.1 4.00.1 1.750.1 4.5 max. 4.0 0.1 0.4 5.30.1 8.00.1 7.50.1 16.00.3 10.30.1 1.5 +0.1 ?0 2542.0 80.01.0 2.00.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0 data sheet pn10222ej07v0ds 9 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
tape direction outline and dimensions (tape) outline and dimensions (reel) ps2561al-1-f3 ps2561al-1-f4 1.550.1 2.00.1 4.00.1 1.750.1 4.5 max. 4.0 0.1 0.4 5.30.1 8.00.1 7.50.1 16.00.3 10.30.1 1.5 +0.1 ?0 packing: 2 000 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 3302.0 1001.0 2.00.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0 data sheet pn10222ej07v0ds 10 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
tape direction ps2561al2-1-e3 ps2561al2-1-e4 outline and dimensions (tape) 2.050.1 2.00.1 4.00.1 1.550.1 1.750.1 4.40.2 12.350.15 0.38 11.50.1 24.00.3 6.60.2 12.00.1 outline and dimensions (reel) packing: 1 000 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 3302.0 1001.0 2.00.5 29.51.0 25.51.0 23.9 to 27.4 outer edge of flange data sheet pn10222ej07v0ds 11 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 12030 s (preheating) 220 c 180 c package surface temperature t ( c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260 c max. 120 c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead. (b) please be sure that the temperature of the package would not be heated over 100 c. data sheet pn10222ej07v0ds 12 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
(4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly betw een the photocoupler?s input and output or between collector-emitters at startup, the output transistor may enter the on state, ev en if the voltage is within the absolute maximum ratings. 3. measurement conditions of current transfer ratios (ctr), which differ according to photocoupler check the setting values before use, since the forward current conditions at ctr measurement differ according to product. when using products other than at the specified forward cu rrent, the characteristics curves may differ from the standard curves due to ctr value variations or the lik e. this tendency may sometimes be obvious, especially below i f = 1 ma. therefore, check the characteristics un der the actual operating conditions and thoroughly take variations or the like into consideration before use. usage cautions 1. protect against static el ectricity when handling. 2. avoid storage at a high temp erature and high humidity. data sheet pn10222ej07v0ds 13 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068-1/din en 60068-1) 55/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, pr ocedure a for type test and random test) u pr = 1.5 u iorm , p d < 5 pc u iorm u pr 890 1 335 v peak v peak test voltage (partial discharge te st, procedure b for all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 1 669 v peak highest permissible overvoltage u tr 8 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (iec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664-1 vde0110 part 1) iii a storage temperature range t stg ?55 to +150 c operating temperature range t a ?55 to +100 c isolation resistance, minimum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100 c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum permiss ible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 175 400 700 10 9 c ma mw data sheet pn10222ej07v0ds 14 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
the information in this document is current as of may, 2009. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. in addition, nec electronics products are not taken measures to prevent radioactive rays in the product design. when customers use nec electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of nec electronics products. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e0904e (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific": data sheet pn10222ej07v0ds 15 ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1
caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, tran sport and dispose of materials that contain arsenic and ot her such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth. ps2561a-1,ps2561al-1,ps2561al1-1,ps2561al2-1

▲Up To Search▲

Price & Availability of PS2561AL-1Y-F3-A

	To Download PS2561AL-1Y-F3-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .