hqdp?020?06.00?seu?ttl?2?f eqdp?028?06.00?stl?ttl?3?s surface mount or edge mount optional captive screw or screw mount option socket or terminal 30 awg eyespeed? ms twinax ribbon cable differential pair routing www.samtec.com f-208 eqdp mates with: qte-dp, qse-dp hqdp mates with: qth-dp, qsh-dp specifications end ttr ttl tbr tbl str stl sbr sbl surface mount t erminal, t op, notch r ight t erminal, t op, notch l eft t erminal, b ottom, notch r ight t erminal, b ottom, notch l eft s ocket, t op notch r ight, s ocket, t op, notch l eft s ocket, b ottom, notch r ight s ocket, b ottom, notch l eft end teu ted seu sed edge mount t erminal, e dge, notch u p t erminal, e dge, notch d own s ocket, e dge, notch u p s ocket, e dge, notch d own wire length (1,27) .050 oal = wire length + l for complete speci cations see www.samtec.com?eqdp or www.samtec.com?hqdp cable: 30 awg eyespeed ms twinax micro ribbon signal routing: 100 differential cable bending radius: (11,11mm) 7/16" min plating: au over 50? (1,27?) ni current rating: 1 a max propagation delay: 4.67 nsec/meter operating temp range: -20? to +90? skew (pair-to-pair): <10 ps/ft skew (within a pair): <5 ps/ft emi performance: fcc class a rohs compliant: ye s end to end l (24,13) .950 (21,21) .835 (20,47) .806 (18,29) .720 (17,55) .691 (16,81) .662 surface mount to surface mount surface mount to edge mount (terminal) surface mount to edge mount (socket) edge mount (terminal) to edge mount (terminal) edge mount (terminal) to edge mount (socket) edge mount (socket) to edge mount (socket) wiring option end options ttr, tbl, stl, sbr, teu, sed to ttr, tbl, stl, sbr, ted, seu or ttl, tbr, str, sbl, ted, seu to ttl, tbr, str, sbl, teu, sed wiring requirements ttr, tbl, stl, sbr, teu, sed to ttl, tbr, str, sbl, teu, sed or ttl, tbr, str, sbl, ted, seu to ttr, tbl, stl, sbr, ted, seu 1 or 2 3 or 4 no. of pairs end no. 1 wire length end no. 2 specify end assemblies from chart wiring option ?1 = pin 1 to pin 1 ?2 = pin 1 to pin 2 ?3 = pin 1 to second last pin ?4 = pin 1 to last pin screw option leave blank for no screw option ?f = end no. 1 ?s = end no. 2 ?b = both ends ??xx.xx? = wire length in inches (95,3mm) 03.75" minimum type hqdp = (0,50mm) .0197" pitch eqdp = (0,80mm) .0315" pitch ?020, ?040, ?060, ?080 (20 pairs per bank) hqdp series ?014, ?028, ?042, ?056 (14 pairs per bank) eqdp series ? end no. 1 (?eu shown) end no. 2 (?tr shown) applications processing conditions will affect mated height. (9,28) .365 (16,56) .652 (12,70) .500 0,50 mm & 0,80 mm twinax hqdp, eqdp series cable length 6" (152,4mm) 12" (304,8mm) 19.68" (0,5m) 39.37" (1m) eqdp 4.48 ghz / 8.96 gbps 4.11 ghz / 8.22 gbps 3.58 ghz / 7.16 gbps 1.32 ghz / 2.64 gbps rated @ -3db insertion loss hqdp 5.94 ghz / 11.88 gbps 5.81 ghz / 11.62 gbps 3.00 ghz / 6.00 gbps 1.76 ghz / 3.52 gbps high speed cable assemblies note: cable lengths longer than 40.00" (1 meter) are not supported with s.i. test data. note: verify part number with samtec s interactive cable builder at www.samtec.com/ cable_builder/pitch.asp note: this series is non-standard, non-returnable.
|
