do not scale from this print [1.0000] [2.54] ((no of pos + 2) x .03937) + .100 ref "a" ref .268 6.81 ref [1.0000] (no of pos + 2) x .03937 ref [1.0000] (no of pos -1) x .03937 .1096 2.783 ref patent number 6159045 "a" "a" 02 01 c2 'd' .460 11.68 ref [1.0000] (no of pos + 2) x .03937 ref .225 5.72 ref x .03937[1.0000] (no of pos -1) .059 1.50 .0394 1.000 mec1-120-02-xx-d-ra1-sl shown (in-processes on sheet 2) c3 c4 mec1-xx-x-d-ra1-x-sl "c" .005 "b" .002 (typ) (see note 8) .320 8.13 ref .169 4.29 .025 ref (typ) 0.64 .03[.8] .470 11.94 .134 ref 3.40 .013 ref (typ) 0.32 'f' section "a"-"a" c-150-04-x-p c-150-01-x-p c5 see table 3 no of positions row specification tail option -ra1: standard -ra2: elevated solder locks non-polarized option -np: no polarized position (only available on -05, -08, -20, & -30 positions) -blank: body is polarized -05, -08, -20, -30, -40, -50, -60 & -70 (per row - see table 2) -d: double (use mec1-xx-x-d-rax-x-sl) plating -f: gold flash (use c-150-xx-f-p) -l: light selective gold (use c-150-xx-l-p) -s: selective gold (use c-150-xx-s-p) -fm: flash gold selective, matte tin tail (use c-150-xx-f-p) -lm: light selective gold, matte tin tail (use c-150-xx-l-p) -sm: selective gold, matte tin tail (use c-150-xx-s-p) -tr: tape & reel option (substitute -t: for -tr: designation when using -xm plating designation with both -np and -sl options) (-t or -tr option not available for 70 pos) -01: .031 thick card (use mec1-xx-t-d-rax-x-sl) -02: .062 thick card (use mec1-xx-s-d-rax-x-sl) (see tables 1 and 4) card thickness mec1-1xx-xx-xx-d-rax-xx-sl-xx .070 ref 1.78 .049 1.23 ref .0394 1.000 "e" .350 ref 8.89 1.5 max sway 2 max sway detail 'd' scale 6 : 1 .01 ref (typ) 0.2 detail 'e' scale 4 : 1 see note 11 .022 ref 0.56 detail 'f' scale 4 : 1 c c1 sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: flammability rating: ul 94v-0 1mm mec1 -ra assembly by: mec1-1xx-xx-xx-d-rax-xx-sl-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing marks 01/25/00 3 1 sheet scale: 2:1 insulator: lcp -01: color: natural -02: color: black contact: phos bronze f:\dwg\misc\mktg\mec1-1xx-xx-xx-d-rax-xx-sl-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. coplanarity: see table 3. 3. burr allowance: .004[0.10] max. 4. note deleted. 5. minimum pushout force: .5 lb. 6. note deleted. 7. tail option -ra1 to have c-150-01-xx-x contact fully pre-formed. 8. to be measured on opposing contacts. 9. bodies to be layer packaged for transit between inventory and production. 10. to be measured at 2 main 90 bends. 11. hot bar form after assembly (will produce retention flange as shown). 12. -f plating option can be subbed for -fm, -l for -lm, & -s for -sm 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision z
.325 ref 8.24 .089 2.26 (-ra1 second row) in-process 2 c-150-x4-x-p .017 0.43 .511 ref 12.98 (-ra1 first row) in-process 1 c-150-x1-x-p .092 2.34 .2225 5.652 (see note 10) 90 90 in process (c-150-04-x-p shown) c8 c4 c7 .1430 3.632 .4082 10.367 .2045 5.194 * dimensions also apply to c-150-14-x-p (-ra1 second row) tube: pt-1-24-01-106 plug: tp-07 standard tail option packaging view elevated tail option tube: pt-1-24-02-106 plug: tp-13 sheet of 1mm mec1 -ra assembly by: mec1-1xx-xx-xx-d-rax-xx-sl-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing marks 01/25/00 3 2 sheet scale: 4:1 revision f:\dwg\misc\mktg\mec1-1xx-xx-xx-d-rax-xx-sl-xx-mkt.slddrw z 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
.360 9.14 .354 8.98 ref 'b' 'c' .025 0.64 (typ) .002 .003[0.06 0.08] .048 1.22 .024 ref 0.62 .010 0.25 .035 0.89 .123 3.12 detail 'b' scale 8 : 1 (dimensions apply to -ra1 & -ra2 options) (see note 11 & detail "e", sht 1) c19 c18 c15 c17 see table 3, sht 1 "b" "b" mec1-120-02-xx-d-ra2-sl shown mec1-xx-x-d-ra2-sl-x [different as shown, otherwise same as tail option -ra1] tail option -ra2 [elevated] shown .017 0.43 .432 10.97 c-150-x5-x-p in-process 2 (-ra2 first row) .092 2.34 .239 ref 6.07 c-150-x6-x-p in-process 2 (-ra2 second row) .219[5.55] ref 'g' section "b"-"b" scale 3 : 1 c-150-06-x-p c-150-05-x-p .3058 7.767 .0378 0.959 .354 8.99 (-ra2 first row) in-process 1 (c-150-05-x-p shown) * dimensions also apply to c-150-15-x-p .1270 3.225 (see note 10) .0170 0.432 90 90 - 5 + 2 c9 c10 c11 .4072 10.342 .1390 3.531 .1160 2.946 (-ra2 second row) in-process 1 (c-150-06-x-p shown) * dimensions also apply to c-150-16-x-p .3110 7.899 (see note 10) 90 .0920 2.337 90 c12 c14 c13 5 max detail 'c' scale 10 : 1 .022 ref 0.56 detail 'g' scale 4 : 1 (applies to both rows) z sheet of 1mm mec1 -ra assembly by: mec1-1xx-xx-xx-d-rax-xx-sl-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing marks 01/25/00 3 3 sheet scale: 2:1 revision f:\dwg\misc\mktg\mec1-1xx-xx-xx-d-rax-xx-sl-xx-mkt.slddrw z 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
