75 south street, hopkinton, ma 01748 ? 800-982-5737 ? 508 -497-6377 ? fax 508-435-5289 ? www.valpeyfisher.com ? reva_10 07 1 m6000 series h6000 series vcxo 5.0v full/half size , thru-hole , hcmos/ttl 3 mhz to 55mhz parameter symbol condition min typ max unit note frequency range f 0.001 150 mhz frequency stability ? f/f operating temperature at 25c 40 50 ppm aging first year after first year 3 1 ppm ppm/yr operating temperature t -40 +85 c supply voltage vcc 4.5 5.0 5.5 v supply current icc 30 45 ma output levels ?0? level, sinking 16ma ?1? level, sourcing 10ma v dd -0.4 0.4 v rise & fall times from 0.4 to (v dd -.4) v (above 35 mhz) 2.5 4 2 ns input impedance pin 5., vc 15 1000 kohm symmetry at v dd /2 45/55 % control voltage bandwidth 15 150 khz features ? frequency range of 1khz to 150mhz ? industrial temperature range of -40 to +85oc ? excellent incremental and best-straight-line linearity ? start-up time is less than 5ms applications ? phase locked loops ? xdsl customer premise equipment ? cable modems ? atm/sonet/sdh electrical specifications rohs status
75 south street, hopkinton, ma 01748 ? 800-982-5737 ? 508 -497-6377 ? fax 508-435-5289 ? www.valpeyfisher.com ? reva_10 07 2 m6000 series h6000 series vcxo 5.0v full/half size , thru-hole , hcmos/ttl parameter specification shock 1000 gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane vibration 10-2000 hz of .06" d.a. or 20 gs, whichever is less humidity resistant to 85 r.h. at 85c gross leak each unit checked in 125c fluorocarbon fine leak mass spectrometer leak rate less than 2 x 10 - 8 atm, cc/sec of helium pins kovar, nickel plated with 60/40 solder coat bend test will withstand two bends of 90 from reference header steel, with nickel plated case stainless steel, type 304 marking permanent black epoxy ink or laser marked resistance to solvents mil std 202, method 215 descriptions m6001, ? h6001 ?? 175 ? ppm, ? min. ? deviation ? when ? using ?? 0.3 ? to ? 10v ? control \ voltage ? m6002, ? h6002 ?? 75 ? ppm, ? min. ? deviation ? when ? using ?? 0.3 ? to ? 4.0v ? control \ voltage ? m6003, ? h6003 ? 175 ? ppm ? to ? 300 ? ppm ? deviation ? when ? using ? 0.3 ? to ? 10v ? control \ voltage ? m6004, ? h6004 ?? 125 ? ppm ? deviation ? when ? using ? 0.3 ? to ? 4.0v ? control \ voltage ? m6005, ? h6005 ?? 75 ? ppm ? to ? 300 ? ppm ? deviation ? when ? using ? 1.0 ? to ? 4.0 ? control \ voltage, ? for ? use ? where ? the ? control ? voltage ? is ? 1 ? volt ? off ? both ? rails ? m6006, ? h6006 ?? 150 ? ppm, ? min. ? deviation ? when ? using ? 0 ? to ? 5.0 ? control \ voltage ? m6007, ? h6007 ?? 125 ? ppm ? to ? 250 ? ppm ? deviation ? when ? using ? 0.5 ? to ? 4.5 ? control \ voltage ? m6021, ? h6021 ?? 75 ? ppm ? capture ? when ? using ? 0.5 ? to ? 4.5v ? control \ voltage ? and ? 2.5v ? center ? with ? 50 ? ppm ? stability ? m6022, ? h6022 ?? 100 ? ppm ? capture ? when ? using ? 0.5 ? to ? 4.5v control \ voltage ? and ? 2.5v ? center ? with ? 50 ? ppm ? stability ? m6023, ? h6023 ?? 150 ? ppm ? capture ? when ? using ? 0.5 ? to ? 4.5v control \ voltage ? and ? 2.5v ? center ? with ? 50 ? ppm ? stability ? environmental and mechanical conditions center frequency is between two voltages with 50 ppm stability center frequency is at 2. 5v with 20 ppm stability
75 south street, hopkinton, ma 01748 ? 800-982-5737 ? 508 -497-6377 ? fax 508-435-5289 ? www.valpeyfisher.com ? reva_10 07 3 m6000 series h6000 series vcxo 5.0v full/half size , thru-hole , hcmos/ttl pin # full size (m) half size (h) 1 control voltage control voltage 4 n/c ground & case 5 n/c output 7 ground & case n/c 8 output +5.0v, vdd 14 +5.0v, vdd n/c how to order m - 6 0 0 1 - freq. g ?m? is full size dil ?6001? is leave blank ?h? is half size dil model type for straight leads add ?g? for gullwig
75 south street, hopkinton, ma 01748 ? 800-982-5737 ? 508 -497-6377 ? fax 508-435-5289 ? www.valpeyfisher.com ? reva_10 07 4 m6000 series h6000 series vcxo 5.0v full/half size , thru-hole , hcmos/ttl frequency vs. control vo ltage for typical device frequency deviation, ppm
|
