specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l55 800 series - snap-acting miniature pushbutton switches features materials contacts: coin silver for power,ul & csa models. gold over nickel over brass for dry circuit models. actuator: glass filled polyester, color white bushing: nickel plated brass strap: stainless steel case: dap, color blue terminal seal: epoxy (standard) support bracket: brass or steel, tin plated spring mounting bracket: stainless steel bezel & cap: nylon. available in black, red & white. consult factory for other colors. hardware: see 'miscellaneous' section. led: intensity: 2.0 mcd at 10 ma. forward voltage: 2.0v (3.0v max.). max. contin- uous forward current: 15 ma for red, 30 ma for green & 20 ma for yellow. red is standard. yellow & green are optional. specifications are subject to change without notice - consult factory. specifications contact ratings (resistive loads): (q) power models - coin silver: 6 amps at 125 vac, 3 amps at 250 vac or 7 amps at 30 vdc. (b) dry circuit models - gold over nickel over brass: 0.4 va max. at 20 v max. ul models - coin silver: 6 amps at 125 vac or 3 amps at 250 vac (75% power factor). ul file no. e66367. csa models - coin silver: same ratings as ul models. csa file no. lr54592-1. initial contact resistance: 20 milliohms max. at 3 vdc, 0.1 amp. insulation resistance: greater than 200,000 megohms between terminals & case ground. dielectric strength: greater than 1500 vac for 1 minute between terminals & case ground. electrical life (resistive loads): 60,000 cycles min. at full load. operating temperature range: -30c to +85c total travel: .035" (0.9mm) approx. actuation force: single pole: 290 75 grams double pole: 550 75 grams about this series the material in this series is organized in the following sequence: a. completely specified switch models b. 'build your own switch' order format c. miscellaneous d. option drawings & information e. panel cut-outs agency recognition ul, & csa. marking: switches ordered with '/ul' added at end of model no. are supplied with recognition marked. switches ordered with '/csa' added at end of model no. are supplied with recognition marked. dry circuit through power ratings . ultra-rugged construction spdt & dpdt momentary models with numerous options. panel, panel & p.c. and p.c. mounting models, lighted and unlighted. also see economy ratings n & t in options section.
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l56 800 series - snap-acting miniature pushbutton switches solder lug terminals - panel mounting horizontal right angle p.c. terminals - p.c. mounting single pole power ckt. model no. ul model no. 810kmzq 810kmzq/ul double pole power ckt. model no. ul model no. 820kmzq 820kmzq/ul single pole dry ckt. model no. ul model no. 810ksab 810ksaq/ul 810ksa-1b 810ksa-1q/ul double pole dry ckt. model no. ul model no. 820ksab 820ksaq/ul 820ksa-1b 820ksa-1q/ul
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l57 800 series - snap-acting miniature pushbutton switches vertical right angle p.c. terminals - p.c. mounting straight p.c. terminals with bracket single pole dry ckt. model no. ul model no. 810ksvb 810ksvq/ul 810ksv-1b 810ksv-1q/ul 810ksv-2b 810ksv-2q/ul double pole dry ckt. model no. ul model no. 820ksvb 820ksvq/ul 820ksv-1b 820ksv-1q/ul 820ksv-2b 820ksv-2 q/ul double pole dry ckt. model no. ul model no. 820ksv30b 820ksv30q/ul 820ksv40b 820ksv40q/ul single pole dry ckt. model no. ul model no. 810ksv30b 810ksv30q/ul 810ksv40b 810ksv40q/ul
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l58 800 series - snap-acting miniature pushbutton switches solder lug terminals - snap-in bezel with outboard led solder lug terminals - snap-in bezel single pole power ckt. dim. model no. ul model no. a 810k2m1zqj6122 810k2m1zqj6122/ul .100 810k1m1zqj6122 810k1m1zqj6122/ul .010 models listed above have black bezel and cap. double pole power ckt. dim. model no. ul model no. a 820k2m1zqj6122 820k2m1zqj6122/ul .100 820k1m1zqj6122 820k1m1zqj6122/ul .010 models listed above have black bezel and cap. single pole power ckt. dim. model no. ul model no. a 810k2m1zqj8122 810k2m1zqj8122/ul .100 810k1m1zqj8122 810k1m1zqj8122/ul .010 models listed above have black bezel and cap. double pole power ckt. dim. model no. ul model no. a 820k2m1zqj8122 820k2m1zqj8122/ul .100 820k1m1zqj8122 820k1m1zqj8122/ul .010 models listed above have black bezel and cap. .512/.517 .512/.517
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l59 800 series - snap-acting miniature pushbutton switches straight p.c. terminals - p.c. mounting bezel double pole dry ckt. dim. model no. ul model no. a 820k2m1cbj8422 820k2m1cqj8422/ul .100 820k1m1cbj8422 820k1m1cqj8422/ul .010 models listed above have black bezel and cap. single pole dry ckt. dim. model no. ul model no. a 810k2m1cbj8422 810k2m1cqj8422/ul .100 810k1m1cbj8422 810k1m1cqj8422/ul .010 straight p.c. terminals w/bracket - p.c. mounting bezel double pole dry ckt. dim. model no. ul model no. a 820k2m1v30bj8422 820k2m1v30qj8422/ul .100 820k1m1v30bj8422 820k1m1v30qj8422/ul .010 models listed above have black bezel and cap. single pole dry ckt. dim. model no. ul model no. a 810k2m1v30bj8422 810k2m1v30qj8422/ul .100 810k1m1v30bj8422 810k1m1v30qj8422/ul .010
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l60 800 series - snap-acting miniature pushbutton switches horizontal right angle p.c. terminals - p.c. mounting bezel double pole dry ckt. dim. model no. ul model no. a 820k2m1abj8422 820k2m1aqj8422/ul .100 820k1m1abj8422 820k1m1aqj8422/ul .010 models listed above have black bezel and cap. single pole dry ckt. dim. model no. ul model no. a 810k2m1abj8422 810k2m1aqj8422/ul .100 810k1m1abj8422 810k1m1aqj8422/ul .010 vertical right angle p.c. terminals - p.c. mounting bezel double pole dry ckt. dim. model no. ul model no. a 820k2m1v-1bj8422 820k2m1v-1qj8422/ul .100 820k1m1v-1bj8422 820k1m1v-1qj8422/ul .010 models listed above have black bezel and cap. single pole dry ckt. dim. model no. ul model no. a 810k2m1v-1bj8422 810k2m1v-1qj8422/ul .100 810K1M1V-1BJ8422 810k1m1v-1qj8422/ul .010 poles option dim. b dim. c sp a .148 .045 max. sp a-1 .164 .095 max. dp a .250 .300 max. dp a-1 .266 .350 max.
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l61 800 series - snap-acting miniature pushbutton switches double pole power ckt. dim. model no. ul model no. a 820k2m1zqj9622 820k2m1zqj9622/ul .100 820k1m1zqj9622 820k1m1zqj9622/ul .010 models listed above have black bezel and cap. single pole power ckt. dim. model no. ul model no. a 810k2m1zqj9622 810k2m1zqj9622/ul .100 810k1m1zqj9622 810k1m1zqj9622/ul .010 snap-in bezel for round hole mounting self-keying against rotation model structure: 'build your own switch' order format fill in boxes with selections shown for model structure , then add options selections for complete model number. allowable options are shown below each respective box with brief description - see option dwgs. & info. following. note: 'none' indicates box may be left empty. additional ordering information: commonly ordered models are shown above and on prior pages with complete model numbers and specifications. below is an order format that enables you to 'build your own switch' and specify the correct switch model n um- ber by simply selecting from all available options shown and filling in the boxes. k standard k1 short k2 medium series actuators bushings terminations contact materials options: bezel& cap bezel color cap color approvals (none) j61 snap-in w/led j81 snap-in no led j84 p.c. style j96 snap-in (round hole) single pole: 810 double pole: 820 m standard 1/4" thd'd. m1 short 1/4" thd'd. d 1/4" thd'd. w/'d' flat s non-threaded z solder lug c printed circuit w wirewrap w1 lg. wirewrap w3 sht. wirewrap x extra lg. wirewrap horiz. right angle p.c. terminals: a a- 1 vertical right angle p.c. terminals: v v- 1 v- 2 straight p.c. terminals w/brkt.: v30 v40 b gold q coin silver g gold over coin silver n economy gold t economy silver (none) 2 black 6 red 8 white consult factory for other colors. (none) 2 black 6 red 8 white (none) /ul /csa notes: when bezel is specified and flush cap is desired, specify k1 actuator and m1 bushing. when bezel is specified and raised cap is desired, specify k2 actuator and m1 bushing. epoxy terminal seal is standard on 800 series. example of completely specified model number: 820k1m1zqj8126/ul/csa although most combinations of options are available, some may result in incompatibilities. consult factory if there is any question.
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com 800 series - snap-acting miniature pushbutton switches l62 switch body sizes with terminal location dimensions side view side view front view single pole double pole single and double pole miscellaneous typical switch cross section comm no nc hardware supplied (see hardware section of catalog) switches with m option bushings are supplied with (2) a112 hex nuts, (1) a115 lockwasher and (1) a107 anti-rotate ring. switches with d option bushings are supplied with (2) a112 hex nuts and (1) a115 lockwasher. switches with m1 option bushings are supplied with (1) a112 hex nut and (1) a115 lockwasher. note: switches with non-threaded bushings or bezels supplied without hard- ware. bushing options m & m1 d s note: bushing m and actuator k are standard. threaded threaded non-threaded actuator/bushing options bushing dim. dimension a option b actuator option kk1k2 m or d .250 .230 .069 .168 s .250 .230 .069 .168 m1 .154 .322 .165 .264 all bushings have 1/4-40 uns-2a thread except s which is non-threaded. switch caps for switches without bezels also available - see hardware section of catalog.
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l63 800 series - snap-acting miniature pushbutton switches termination options a a-1 v30 & v40 front view single pole single pole horizontal p.c. mounting single pole horizontal p.c. mounting a a-1 double pole horizontal p.c. mounting double pole horizontal p.c. mounting v, v-1 & v-2 vertical p.c. mounting front view double pole side view - single & double pole option dim. a dim. b v .550 .150 v-1 .500 .150 v-2 .500 .100 option dim. a dim. b v30 .527 .024 v40 .647 .048 panel layout v30 & v40
specifications subject to change without notice l apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com l64 800 series - snap-acting miniature pushbutton switches termination options (cont'd.) solder lug printed circuit wirewrap long wirewrap short wirew rap extra lg. wirewrap z c w w1 w3 x contact material options b q g n t dry circuit - gold over nickel over brass. rating: 0.4 volt-amps (va) max. at 20 v max. electric life: 60,000 cycles minimum. mechanical life: 500,000 cycles minimum. power circuit - coin silver. rating: 6 amps at 125 vac, 3 amps at 250 vac or 7 amps at 30 vdc (resistive loads). electric life: 60,000 cycles minimum at full load. dry circuit or power circuit - gold over nickel over coin silver. ratings & electric life: same as b & q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit, switch cannot be re-used in dry circuit. this option satisfies those customers who have both dry circuit and power circuit requ irements, but prefer to inventory only one switch for both. dry circuit - gold over nickel over brass. note- less gold than b option. rating: 0.4 volt-amps (va) max. at 20 v max. electric life: 10,000 cycles min. at 13 cycles per minute. power circuit - silver plate over brass. rating: 1 amp at 125 vac or 0.5 amps at 250 vac (resistive loads). electric life: 10,000 cycles min. at 13 cycles per minute. solder dipped terminals and custom contact plating available - contact factory. ul & csa options ul csa for power circuits - coin silver rating: 6 amps at 125 vac or 3 amps at 250 vac (75% power factor). underwriter laboratories file no. e66367. note - applicable only to terminations with coin silver contacts (q or g options). for power circuits - coin silver rating: 6 amps at 125 vac or 3 amps at 250 vac (75% power factor). canadian standards association file no. lr54592-1. note - ap plicable only to terminations with coin silver contacts (q or g options) as csa recognizes switches for power applications only. panel cut-outs cut-outs that accept all 1/4-40 threaded bushings: without keying with a107 anti-rotate with a158 anti-rotate with d bushing with slotted keyway ac cepts all 1/4" non- ring ring bushings threaded bushings
|
