www.samtec.com samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. f-203 tcsd 20 d 02.00 01 n r tcsd tmm .26" (6,6mm) m = middle reverse 5 r = reversed tcsd series mates with: tmm, tmmh, stmm, mmt, tw, mtmm, eht type strip 2mm idc cable strips o = outside reverse 5 3 requires ?xx 5 requires ?xx low profile, only 5mm (.200") assembled height four-finger contacts optimize normal, insertion and withdrawal forces ask about our custom idc design capabilities no. pins per row end option xx.xx = assembled length other option f = gold flash on contact area, tin on balance assembled length in inches ( 1/8") 2 inches minimum leave blank for standard plating: 30 "(0,76 m) gold on contact area, tin on balance 05, 08, 10, 12, 13, 15, 17, 20, 22, 25 (call for other sizes) rw = reverse wiring 01 02 blue or black wire opposite position #1. 1 specify xx as position number. same position will be polarized on both ends. 01 plating option n length note: tcsd series assemblies are non- standard, non-returnable. = double end d polarizing key specify pk-01-07 for polarizing key. also polarizes smm series socket strips 4 2" min. 4" minimum xx 1/8" double row connectors outer most (end of assembly) d xx = daisy chain p xx = position polarization 01 02 s = single end tcsd = socket strip (2,00) .0787 (2,00) .0787 no. of positions x (2,00) .0787 + (4,00) .157 (5,08) .200 (1,00) .039 (4,00) .158 01 (3,17) .125 (1,02) .040 n = notch polarization 2 b xx = breakout ?x 5"max. 2"min. specify xx as number of conductors to be broken out. breakout starts with number 1 lead indicated by brown wire or red stripe. shown on top side. for complete specifications see www.samtec.com?tcsd insulator material: black glass filled polyester contact: becu current rating: 1a operating temp range: -40 c to +105 c plating: au or sn over 50 " (1,27 m) ni lead size accepted: (0,48mm) .019" to (0,53mm) .021" contact resistance: 10 m ? maximum insertion depth: (2,87mm) .113" to (3,17mm) .125" insertion force: 2 oz. (0,56n) average withdrawal force: 1.4 oz (0,39n) average wire: 28 awg 7/36 stranded, tinned, copper with gray pvc insulator specifications features
|
