product catalogue | terminals | push in-technology | modular pe terminals | 6 / 10 mm2 - 1 - general ordering data order no. 1896180000 part designation ppe 6/10 version earth terminal, 10 mm2, push-in, wemid, green/ yellow, ts 35 ean 4032248511105 qty. 25 pc(s). product notes note, ordering data for use with 10 mm2 conductors, with wire-end ferrules and cross-section-optimized plastic collars (order no. 9203620000) pt okiecex/atex rating data eu-type examination certificate kema06atex0177u download, german kema06atex0177u_d.pdf download english kema06atex0177u_e.pdf iecex certificate of conformity iecexkem06.0032u download iecexkem06.0032u_e.pdf atex conductor cross-section 6 mm2 iecex conductor cross-section 6 mm2 voltage when using cross-connections crossconnectionguide.pdf operating temperature range einsatztemperaturbereich siehe eg- baumusterprfbescheinigung/iecex-certificate of conformity marking en 60079-7 ex e ii marking atex directive 94/9/ec ex ii 2 g d additional technical data colour of insulating material green/yellow connection direction top end plate required yes explosion-tested version "ex e" yes installation advice ts 35 insulating material wemid levels cross-connected internally no no. of levels 1 no. of terminal strips per level 2 open sides right
product catalogue | terminals | push in-technology | modular pe terminals | 6 / 10 mm2 - 2 - additional technical data operating temperature range - 50 c, + 120 c type of connection plugged type of mounting snap-on ul 94 flammability rating of insulation material v-0 version earth terminal conductors for clamping (rated connection) clamping range, min. 1.5 mm2 clamping range, max. 10 mm2 type of connection push-in connection direction top stripping length 14 mm blade size 0.6 x 3.5 mm solid, min. 1.5 mm2 solid, max. 10 mm2 flexible, min. 1.5 mm2 flexible, max. 10 mm2 flexible with ferrule, min. (din 46228/1) 1.5 mm2 flexible with ferrule, max. (din 46228/1) 10 mm2 flexible, min., ferrule with plastic collar (din 46228 pt 4) 10 mm2 flexible, max., ferrule with plastic collar (din 46228 pt 4) 6 mm2 awg conductor size, min. awg 16 awg conductor size, max. awg 8 dimensions width 8.1 mm height of lowest version 40 mm length 63.5 mm ts 35 offset 51 mm rating data rated cross-section 10 mm2 rated impulse voltage 8 kv rated current 57 a standards iec 60947-7-2 pollution severity 3 approvals approvals institutes downloads step 1896180000_41754_ppe_6-10_2an_stp.stp
product catalogue | terminals | push in-technology | modular pe terminals | 6 / 10 mm2 - 3 - downloads classifications etim 2.0 ec000901 etim 3.0 ec000901 eclass 4.1 27-14-03-05 eclass 5.0 27-14-03-05 eclass 5.1 27-14-03-05 similar products order no. part designation version 1896190000 ppe 6/10/3an earth terminal, 10 mm2, push-in, wemid, green/yellow, ts 35
|
