View UPD5754T7A_7220561.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r09ds0012ej0100 rev.1.00 page 1 of 12 dec 22, 2010 preliminary data sheet pd5754t7a sige/cmos integrated circuit 4 2 if switch matrix with gain and tone/voltage controller features ? 4 independent if channels, integral switching to channel input to either channel output ? 4 2 switch matrix with integrated if am plifier and switch control - tone/voltage - switch?s enable mode is linked v cc external pins ? mirror reversal logic pattern of pd5739t7a ? frequency range : f = 950 mhz to 2 150 mhz ? high isolation : isl d/u = 30 db typ. @worst mode ? power gain : g p = 18 db typ. @ z s = z l = 50 ? power gain flatness : g p = 1.0 db typ. ? surface mounting : 28-pin 5 5 mm square micro lead package (28-pin plastic qfn (0.5 mm pitch)) applications ? dbs if switching ? multiswitch, switch box ? 4 2 switching application for microwave signal ordering information part number order number package marking supplying form pd5754t7a-e1 pd5754t7a-e1-a 28-pin plastic qfn (0.5 mm pitch) (pb-free) d5754 ? embossed tape 12 mm wide ? pin 8 to 14 face the perforation side of the tape ? qty 2.5 kpcs/reel ? dry packing specification (msl 3 equivalent) remark to order evaluation samples, please contact your nearby sales office. part number for sample order: pd5754t7a caution observe precautions when handling because these devi ces are sensitive to electrostatic discharge. r09ds0012ej0100 rev.1.00 dec 22, 2010
pd5754t7a r09ds0012ej0100 rev.1.00 page 2 of 12 dec 22, 2010 absolute maximum ratings (t a = +25 c, unless otherwise specified) parameter symbol ratings unit supply voltage v dd , v cc 1, v cc 2 +4.0 v power dissipation note p d 1.465 w storage temperature t stg ? 55 to +125 c operating ambient temperature t a ? 40 to +85 c input power p in +5 dbm pola control input voltage (pola1 and pola2) v pola +25 v tone signal input voltage v tone 1 v p-p note: mounted on double-sided copper-clad 50 50 0.51 mm laminates pwb, t a = +85 c recommended operating range (t a = +25 c, unless otherwise specified) parameter symbol min. typ. max. unit supply voltage note v dd , v cc 1, v cc 2 +3.0 +3.3 +3.6 v operating ambient temperature t a ? 40 +25 +85 c pola control input voltage v pola 0 ? 21 v tone signal frequency f tone 18 22 26 khz tone signal input voltage v tone 0.4 0.6 0.8 v p-p note: v cc 1 = v cc 2 = v dd electrical characteristics (t a = +25 c, v dd = v cc 1 = v cc 2 = +3.3 v, z s = z l = 50 for each port, worst mode, unless otherwise specified) parameter symbol test conditi ons min. typ. max. unit total supply current i cc non?rf, 2 channels active total current of i cc 1, i cc 2, and i dd 33 40 50 ma power gain 1 g p 1 p in = ? 30 dbm, f = 0.95 ghz 15 18 21 db power gain 2 g p 2 p in = ? 30 dbm, f = 2.15 ghz 14.5 17.5 20.5 db isolation d/u-ratio 2 note isl d/u 2 p in = ? 30 dbm, f = 2.15 ghz 25 30 ? db gain 1 db compression output power 1 p o (1 db) 1 f = 0.95 ghz 5 8 ? dbm gain 1 db compression output power 2 p o (1 db) 2 f = 2.15 ghz 3 6 ? dbm output return loss 1 rl out 1 p in = ? 30 dbm, f = 0.95 ghz 10 14 ? db output return loss 2 rl out 2 p in = ? 30 dbm, f = 2.15 ghz 10 12.5 ? db noise figure 1 nf1 f = 0.95 ghz ? 10.5 12.5 db noise figure 2 nf2 f = 2.15 ghz ? 11.5 13.5 db pola control threshold voltage, channel selection v th_pola off to on 14 14.5 15.5 v tone signal threshold voltage, channel selection v th_tone f tone = 22 khz, duty cycle = 50%, pulse wave, off to on 0.1 0.15 0.35 v p-p note: isolation d/u (d esire/u n-desire) ratio = ? (signal leakage (off-state)) ? (power gain (on-state)) ? at worst mode
pd5754t7a r09ds0012ej0100 rev.1.00 page 3 of 12 dec 22, 2010 standard characteristics for reference (t a = +25 c, v dd = v cc 1 = v cc 2 = +3.3 v, z s = z l = 50 for each port, worst mode, unless otherwise specified) parameter symbol test conditions reference value unit supply current of v cc 1, v cc 2 i cc 1, i cc 2 19 ma supply current of v dd i dd 2.0 ma gain flatness g p 1 p in = ? 30 dbm, 1.0 db differential gain between active channels g p 2 f = 0.95 ghz to 2.15 ghz 1.0 db gain change, selected channel g p 3 1.0 db isolation d/u ratio 1 note isl d/u 1 p in = ? 30 dbm, f = 0.95 ghz 30 db input return loss 1 rl in 1 p in = ? 30 dbm, f = 0.95 ghz 13 db input return loss 2 rl in 2 p in = ? 30 dbm, f = 2.15 ghz 10 db output 3rd order intercept point 1 oip 3 1 f1 = 950 mhz, f2 = 951 mhz 19 dbm output 3rd order intercept point 2 oip 3 2 f1 = 2 150 mhz, f2 = 2 151 mhz 15 dbm 2nd order intermodulation distortion im 2 f1 = 950 mhz, f2 = 951 mhz, p out = ? 5 dbm/tone 44 dbc 2nd harmonics 2f0 f0 = 1.0 ghz, p out = ? 15 dbm 60 dbc k factor 1 k1 p in = ? 30 dbm, f = 0.95 ghz 2.5 ? k factor 2 k2 p in = ? 30 dbm, f = 2.15 ghz 2.5 ? pola control current i pola v pola = 21 v 50 a pola switching time t pola v pola = 18 v, off to on 1.0 s tone switching time t tone f tone = 22 khz, duty cycle = 50%, pulse wave, v tone = 600 mv p-p , off to on 250 s note: isolation d/u (d esire/u n-desire) ratio = ? (signal leakage (off-state)) ? (power gain (on-state)) ? at worst mode
pd5754t7a r09ds0012ej0100 rev.1.00 page 4 of 12 dec 22, 2010 pin connections (bottom view) (top view) d5754 pin 1 identifier 1234567 8 9 10 11 12 13 14 21 20 19 18 17 16 15 28 27 26 25 24 23 22 7654321 8 9 10 11 12 13 14 15 16 17 18 19 20 21 28 27 26 25 24 23 22 gnd pin no. pin name pin no. pin name pin no. pin name pin no. pin name 1 v cc 1 8 gnd 15 in-d 22 gnd 2 out1 9 in-b 16 gnd 23 pola2 3 gnd 10 gnd 17 gnd 24 tone2 4 gnd 11 gnd 18 gnd 25 v dd 5 gnd 12 gnd 19 gnd 26 tone1 6 gnd 13 in-c 20 out2 27 pola1 7 in-a 14 gnd 21 v cc 2 28 gnd remark heat sink (bottom side) : gnd
pd5754t7a r09ds0012ej0100 rev.1.00 page 5 of 12 dec 22, 2010 truth table of switching by condition of control voltage state output to input state control pins no. mode out1 out2 tone1 pola1 tone2 pola2 v cc 1 (enable1) v cc 2 (enable2) 1 dd in-d 22 khz low 22 khz low 3.3 v 3.3 v 2 dc in-c 22 khz low 0 low 3.3 v 3.3 v 3 db in-b 22 khz low 0 high 3.3 v 3.3 v 4 da in-d in-a 22 khz low 22 khz high 3.3 v 3.3 v 5 cd in-d 0 low 22 khz low 3.3 v 3.3 v 6 cc in-c 0 low 0 low 3.3 v 3.3 v 7 cb in-b 0 low 0 high 3.3 v 3.3 v 8 ca in-c in-a 0 low 22 khz high 3.3 v 3.3 v 9 bd in-d 0 high 22 khz low 3.3 v 3.3 v 10 bc in-c 0 high 0 low 3.3 v 3.3 v 11 bb in-b 0 high 0 high 3.3 v 3.3 v 12 ba in-b in-a 0 high 22 khz high 3.3 v 3.3 v 13 ad in-d 22 khz high 22 khz low 3.3 v 3.3 v 14 ac in-c 22 khz high 0 low 3.3 v 3.3 v 15 ab in-b 22 khz high 0 high 3.3 v 3.3 v 16 both outs enabled aa in-a in-a 22 khz high 22 khz high 3.3 v 3.3 v 17 nd in-d any note any note 22 khz low 0 3.3 v 18 nc in-c any note any note 0 low 0 3.3 v 19 nb in-b any note any note 0 high 0 3.3 v 20 out1 disabled na none in-a any note any note 22 khz high 0 3.3 v 21 dn in-d 22 khz low any note any note 3.3 v 0 22 cn in-c 0 low any note any note 3.3 v 0 23 bn in-b 0 high any note any note 3.3 v 0 24 out2 disabled an in-a none 22 khz high any note any note 3.3 v 0 25 both outs disabled none none any note any note any note any note 0 0 note: any means high or low, 22 khz or 0. remark low : under +14 vdc, high : +15.5 to +19.0 vdc, v dd = +3.3 vdc functional diagram in-a gnd gnd gnd gnd out1 v cc 1 gnd pola1 tone1 v dd tone2 pola2 gnd gnd in-b gnd gnd gnd in-c gnd in-d gnd gnd gnd gnd out2 v cc 2 4 2 switch matrix 4 : 16 decoder switch controller if amp1 enable1 if amp2 enable2 1 7 8 14 15 21 22 28 (top view)
pd5754t7a r09ds0012ej0100 rev.1.00 page 6 of 12 dec 22, 2010 evaluation circuit gnd gnd gnd gnd out1 gnd tone2 gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd 4 2 switch matrix 4 : 16 decoder switch controller if amp1 enable1 if amp2 enable2 1 7 8 14 15 21 22 28 100 pf in-a rf input v cc 1 = +3.3 v 1 000 pf 1 000 pf 100 pf 47 nh 100 pf in-b rf input 100 pf in-c rf input 100 pf in-d rf input out2 v cc 2 = +3.3 v 1 000 pf 100 pf pola2 pola control = 13 v/18 v 330 pf r = 0 k note 10 nf pola1 pola control = 13 v/18 v 330 pf r = 0 k note tone control = 0/22 khz, 0.6 v p-p , pluse tone1 10 nf tone control = 0/22 khz, 0.6 v p-p , pluse v dd = +3.3 v 1 000 pf 1 000 pf 47 nh note: r = 0 k (at pola control = 13 v/18 v) = 5.6 k (at pola control = 14 v/18 v) remark low : under +14 vdc, high : +15.5 to +19.0 vdc, v dd = +3.3 vdc the application circuits and their parameters are for refere nce only and are not intended for use in actual design-ins.
pd5754t7a r09ds0012ej0100 rev.1.00 page 7 of 12 dec 22, 2010 typical characteristics (t a = +25 c, v dd = v cc 1 = v cc 2 = +3.3 v, z s = z l = 50 for each port, worst mode, unless otherwise specified) total supply current i cc (ma) supply voltage v cc (v) total supply current vs. supply voltage (if-amplifier part) 25 15 0 25 1 3 4 0 20 10 5 no input signal v pola = v tone = 0 v supply current of v dd i dd (ma) supply voltage v dd (v) supply current of v dd vs. supply voltage (control part) 2.5 1.5 0 25 1 3 4 0 2.0 1.0 0.5 no input signal v cc = v pola = v tone = 0 v pola control current i pola ( a) pola control input voltage v pola (v) pola control current vs. pola control input voltage (control part) 50 45 40 35 30 25 20 15 10 5 0 10 25 5 15 20 0 no input signal v dd = 3.3 v, v cc = v tone = 0 v power gain g p (db) frequency f (ghz) power gain vs. frequency 22 21 20 19 18 17 16 15 14 13 12 11 10 3.0 4.5 0.5 3.5 4.0 0 1.0 1.5 2.0 2.5 isolation d/u ratio isl d/u (db) frequency f (ghz) isolation d/u ratio vs. frequency 0 ?10 ?20 ?30 ?40 ?50 ?60 ?70 ?80 3.0 4.5 0.5 3.5 4.0 0 1.0 1.5 2.0 2.5 remark the graphs indicate nominal characteristics.
pd5754t7a r09ds0012ej0100 rev.1.00 page 8 of 12 dec 22, 2010 output power p out (dbm) input power p in (dbm) output power vs. input power 20 15 10 5 0 ?5 ?10 ?15 ?20 ?25 ?10 20 ?40 ?20 0 10 ?50 ?30 f = 0.95 ghz p o (1 db) = +8.3 dbm output power p out (dbm) input power p in (dbm) output power vs. input power 20 15 10 5 0 ?5 ?10 ?15 ?20 ?25 ?10 20 ?40 ?20 0 10 ?50 ?30 f = 2.15 ghz p o (1 db) = +5.9 dbm output power p out (1 tone) (dbm) 3rd order intermoduration distortion im 3 (1 tone) (dbm) input power p in (1 tone) (dbm) output power, im 3 vs. input power 30 20 10 0 ?10 ?20 ?30 ?40 ?50 ?60 ?70 ?10 0 ?30 ?20 ?5 ?35 ?25 p out ?15 f1 = 950 mhz f2 = 951 mhz im 3 oip 3 = +18.8 dbm output power p out (1 tone) (dbm) 3rd order intermoduration distortion im 3 (1 tone) (dbm) input power p in (1 tone) (dbm) output power, im 3 vs. input power 30 20 10 0 ?10 ?20 ?30 ?40 ?50 ?60 ?70 ?10 0 ?30 ?20 ?5 ?35 ?25 p out ?15 f1 = 2 150 mhz f2 = 2 151 mhz im 3 oip 3 = +14.7 dbm output power p out (1 tone) (dbm) 2nd order intermoduration distortion im 2 (2 tone) (dbm) input power p in (1 tone) (dbm) output power, im 2 vs. input power 20 10 0 ?10 ?20 ?30 ?40 ?50 ?60 ?10 ?5 ?20 ?30 ?25 p out ?15 f1 = 950 mhz f2 = 951 mhz im 2 output power p out (dbm) 2nd harmonics 2f0 (dbm) input power p in (dbm) output power, 2f0 vs. input power 10 0 ?10 ?20 ?30 ?40 ?50 ?60 ?70 ?80 ?10 0 ?20 ?40 ?30 f = 1 000 mhz 2f0 p out remark the graphs indicate nominal characteristics.
pd5754t7a r09ds0012ej0100 rev.1.00 page 9 of 12 dec 22, 2010 noise figure nf (db) frequency f (mhz) noise figure vs. frequency 13.0 12.5 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 1 500 3 000 1 000 2 000 2 500 0 500 tone signal input voltage v tone (mv p-p ) tone signal frequency f tone (khz) on area of tone 450 400 350 300 250 200 150 100 50 0 1 000 100 10 1 18 26 on area of tone pulse signal (duty 50%) off on on off pola circuit output voltage pola_out (v) pola circuit input voltage pola_in (v) pola thereshold voltage 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 ? 0.5 18 16 13 12 14 15 off on on off 17 15.5 remark the graphs indicate nominal characteristics.
pd5754t7a r09ds0012ej0100 rev.1.00 page 10 of 12 dec 22, 2010 mounting pad layout dimensions 28-pin 5 5 mm square micro lead package (28-pin plastic qfn (0.5 mm pitch)) (unit: mm) 3.02 0.5 3.02 28 ? 0.2 0.5 2.65 2.65 2.1 2.1 2.65 2.65 2.1 2.1 remark the mounting pad layout in this document is for reference only.
pd5754t7a r09ds0012ej0100 rev.1.00 page 11 of 12 dec 22, 2010 package dimensions 28-pin 5 5 mm square micro lead package (28-pin plastic qfn (0.5 mm pitch)) (unit: mm) 5.00.1 5.00.1 (bottom view) 0.720.05 3.020.1 0.40.05 0.5 3.020.1 0.5 0.20.05 0.08 min. (c0.2) (top view) (side view) (dimensions of each pin part) 0.20.05 a a 0.08 min. 0.40.05 (0.325) pin1 remark a>0 ( ) : reference value
pd5754t7a r09ds0012ej0100 rev.1.00 page 12 of 12 dec 22, 2010 recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin flux (% mass) : 0.2%(wt.) or below ir260 partial heating peak temperature (terminal temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin flux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering methods together (except for partial heating).
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history pd5754t7a data sheet description rev. date page summary 1.00 dec 22, 2010 ? first edition issued
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is s ubject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control l aws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology described in this document for any purpose rela ting to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporate d into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 7. renesas electronics products are classified according to the following three quality grades: "standard", "high quality", an d "specific". the recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. you must check the quality grade of each renesas electronics produ ct before using it in a particular application. you may not use any renesas electronics product for any application categorized as "specific" without the prior written consent of renesas electronics. fu rther, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for an application categorized as "specific" or for which the product is not intended wh ere you have failed to obtain the prior written consent of renesas electronics. the quality grade of each renesas electronics product is "standard" unless otherwise expressly specified in a renesas electroni cs data sheets or data books, etc. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment ; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "specific": aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or syst ems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct thr eat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas el ectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design . please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compati bility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. renesas electronics america inc. 2880 scott boulevard santa clara, ca 95050-2554, u.s.a. tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-585-100, fax: +44-1628-585-900 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-6503-0, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 204, 205, azia center, no.1233 lujiazui ring rd., pudong district, shanghai 200120, china tel: +86-21-5877-1818, fax: +86-21-6887-7858 / -7898 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 7f, no. 363 fu shing north road taipei, taiwan, r.o.c. tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 1 harbourfront avenue, #06-10, keppel bay tower, singapore 098632 tel: +65-6213-0200, fax: +65-6278-8001 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co., ltd. 11f., samik lavied' or bldg., 720-2 yeoksam-dong, kangnam-ku, seoul 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2010 renesas electronics corporation. all rights reserved. colophon 1.0

▲Up To Search▲

Price & Availability of UPD5754T7A

	To Download UPD5754T7A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .