specification control drawing te connectivity 300 constitutional drive menlo park, ca 94025 usa title: soldergrip* stub splice unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no.: sgrp-x tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 15-apr-11 doc issue: 6 drawn by: m. foronda cage code: 06090 replaces: d981339 dcr number: d020135 prod. rev.: see table scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontroll ed. check for the latest revision. product revision ball product dimensions copper cro ss section bundle ? product name color l ? 3.5 (l ? 0.140) ?a ?b min. mm 2 (cma) max. mm 2 (cma) ?d max m ? 1 (m ? 0.04) sgrp-1 c green 38.3 (1.510) 3.1 ? 0.2 (0.125 ? 0.008) 26.0 ? 2 (1.025 ? 0.079) 0.7 (1400) 2.4 (4800) 4.0 (0.160) 15 (0.590) sgrp-2 c red 37.7 (1.485) 3.9 ? 0.2 (0.155 ? 0.008) 23.5 ? 2 (0.925 ? 0.079) 2.0 (4000) 4.0(8000) 6.0 (0.235) 15 (0.590) SGRP-3 d blue 44.5 (1.750) 5.35 ? 0.3 (0.210 ? 0.012) 25.5 ? 3 (1.00 ? 0.118) 3.5 (7000) 9.0(18000) 8.5 (0.335) 15 (0.590) sgrp-4 d yellow 45.5 (1.790) 7.15 ? 0.3 (0.280 ? 0.012) 25.0 ? 3 (0.985 ? 0.118) 7.5 (15000) 15.0(3000) 10.5 (0.410) 15 (0.590) these products are tested to rb109. materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinyliden e fluoride. 2. solder preform with flux: solder: type sn60 per ansi-j-std-006. flux: type rom1 per ansi-j-std-004. 3. conical spring: square copper wire. 4. end closure ball: tinted glass. color: see table . application 1. these controlled soldering devices are designed stub splicing of stranded wires with bare copper co nductor having an insulation rated for 85 ? c minimum. 2. temperature range: class 3a, -40 ? c to +125 ? c. vibration range: class 1 (body). seal range: class 0 (seal porous or no seal). 3. for installation procedure and application equip ment consult, rpip-820-00. for best results, prepare the cable as shown: * a trademark of te connectivity
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: te connectivity: ? SGRP-3
|
