statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com s y s t e m c e r t i f i c a t i o n i s o 9 0 0 1 description statek s miniature cx1hgsm at crystals in leadless ceramic packages are designed for surface mounting on printed circuit boards or hybrid substrates. these rugged crystals are designed for applications requiring exceptional shock and vibration survival. features high shock and vibration resistance designed for surface mount applications using infrared, vapor phase, or epoxy mount techniques low profile hermetically sealed ceramic package available with glass or ceramic lid custom designs available full military testing available designed and manufactured in the usa applications industrial down-hole data recorder process control environmental control engine control telemetry ruggedized instrumentation automotive control military & aerospace smart munitions timing devices (fuzes) surveillance devices missile telemetry ruggedized communications aviation equipment cx1hgsm at crystal 6 mhz to 250 mhz high shock miniature surface mount at quartz crystal fundamental mode: 6 mhz - 250 mhz typical maximum dim inches mm inches mm a0.3158.000.3308.38 b0.1403.560.1553.94 c-- see below d0.0451.140.0551.40 e0.0601.520.0701.78 thickness (dim c) maximum glass lid ceramic lid inches mm inches mm sm1 0.065 1.65 0.070 1.78 sm2/sm4 0.067 1.70 0.072 1.83 sm3/sm5 0.070 1.78 0.075 1.90 10108 - rev d sxxxx a b e d d top bottom c e package dimensions glass lid ceramic lid
statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com s y s t e m c e r t i f i c a t i o n i s o 9 0 0 1 10108 - rev d specifications specifications are typical at 25 o c unless otherwise noted. specifications are subject to change without notice. fundamental frequency 10 mhz 32 mhz 155.52 mhz motional resistance r 1 ( )30 25 15 motional capacitance c 1 (ff) 5.5 6.2 4.0 quality factor q (k) 100 30 30 shunt capacitance c 0 (pf) 2.2 2.3 2.3 calibration tolerance 1 100 ppm, or tighter as required load capacitance 2 20 pf for f 50 mhz 10 pf for f > 50 mhz drive level 500 w max for f 50 mhz 200 w max for f > 50 mhz frequency-temperature 50 ppm to 10 ppm (commercial) stability 1,3 100 ppm to 20 ppm (industrial) 100 ppm to 30 ppm (military) aging, first year 4 10 ppm max shock, survival 5 10,000 g, 0.2 ms, 1/2 sine vibration, survival 6 20 g, 10-2,000 hz swept sine operating temp. range -10 o c to +70 o c (commercial) -40 o c to +85 o c (industrial) -55 o c to +125 o c (military) storage temp. range -55 o c to +125 o c. max process temperature 260 o c for 20 sec. 1. other tolerances available. contact factory. 2. unless specified otherwise. 3. does not include calibration tolerance. the characteristics of the frequency stability over temperature follow that of the at thickness-shear mode. 4. 10 ppm max for frequencies below 40 mhz. for tighter tolerances and higher frequencies contact factory. 5. up to 100,000 g. contact factory. 6. per mil-std-202g, method 204d, condition e. random vibration testing also available. + _ + _ + _ + _ + _ + _ + _ suggested land pattern 0.160 (4.06) inches (mm) 0.070 (1.78) 0.270 (6.86) terminations designation termination sm1 gold plated (lead free) sm2 solder plated sm3 solder dipped sm4 solder plated (lead free) sm5 solder dipped (lead free) max process temperature 260 o c for 20 sec. packaging options ? tray pack ? 16mm tape, 7?or 13?reels per eia 481 (see tape and reel data sheet 10109) cx1 s hg c sm1 32.0m , 100 / 100 / / i ??if special or custom design. blank if std. c = ceramic lid blank = glass lid sm1 = gold plated (lead free) sm2 = solder plated sm3 = solder dipped sm4 = solder plated (lead free) sm5 = solder dipped (lead free) frequency m = mhz calibration tolerance @ 25 o c (in ppm) frequency stability over temp. range (in ppm) operating temp. range: c=-10 o c to +70 o c i =-40 o c to +85 o c m=-55 o c to +125 o c s=customer specified total frequency tolerance (in ppm) operating temp. range: c=-10 o c to +70 o c i =-40 o c to +85 o c m=-55 o c to +125 o c s=customer specified or 200 i c 0 c 1 r 1 2 1 l 1 equivalent circuit r 1 motional resistance l 1 motional inductance c 1 motional capacitance c 0 shunt capacitance how to order cx1hgsm at crystals
|
