View WPSPG-XXHX5000_7315239.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this page intentionally left blank.
wpspg spark gap protectors | 1 table of contents ees - low current axial lead type 2 m serie - medium current axial lead type 6 h serie - high current axial lead type 10 h serie - super high current axial lead type 14 ls serie - low current smd type 18 ms serie - medium current smd type 22 hs serie - high current smd type 26 world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
2 | wpspg spark gap protectors wpspg spark gap p r otectors ? l series wpspg - 20 l 200 (1) (2) (3) (4) (5) (1) w orld pr oducts spark gap pr otector (2) dc spark-over v oltage t olerance: (example: 20=20% tolerance) (3) series t ype l= low current (4) dc spark-over v oltage: (example: 200 = 200v) ta part numbering system fea tures: 1. rohs compliant and halogen free 2. ul497b ? pending 3. fast responding 4. low capacitance 5. zero leakage current 6. stable electrical characteristics over time 7. can withstand repeated surges 8. symmetrical 9. operate and storage temperature: -40oc to +85oc (5) packaging: nil = bulk ta = taped/ammo box world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 3 wpspg spark gap protectors - l series wpspg- xxl 3 00 1 0 0 wpspg- xxl 4 0 0 2 5 0 2 5 0 2 5 0 2 5 0 wpspg- xxl 5 00 wpspg- xxl 600 wpspg- xxl 700 wpspg- xxl 1000 500 wpspg- xxl 1500 500 >500a 100a >150 times 4.0 0.5 l 1 2.0 0.5 d d 0.5 0.05 colo r co de 1 colo r co de 2 colo r co de 3 d d 1 l l1 l l wpspg- xxl 1 40 200 220 300 400 500 600 700 1000 140 1500 5 0 100 100 100 100 100 100 100 100 100 100 wpspg- xxl 2 20 1 0 0 wpspg- xxl 2 00 1 0 0 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 note: vsxx% (dc spark-over voltage tolerance 30% and 20%),140v device is only available in 30% tolerance. 28.0 3.0 dimensions in mm. electrical characteristics world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
4 | wpspg spark gap protectors wpspg spark gap protectors - l series color code part number color code 1 color code 2 color code 3 wpspg-xxl220 red red wpspg-xxl200 red wpspg-xxl400 yellow wpspg-xxl500 green wpspg-xxl600 blue wpspg-xxl700 white brown wpspg-xxl1000 black n w o r b 0 0 5 1 l x x - g p s p w green wpspg-xxl140 black yellow wpspg-xxl300 orange red test methods and resul ts item test met h od stand ar d dc spark over voltage(vs) measure starting discharge voltage (vs) by gradu ally increasing appli ed dc voltag e. test current is 0.5 m a max. an d the dc voltage ascends up within as follow condition. vs <1000v 100v/second vs >1000v 500v/second meet specified value. insulation resistance(ir) measure the insulation resistance across the terminal at regular volta g e . but the test voltage doesn?t go beyond the dc spark-ove r voltage . capacitance measure the electros tatic capacitance by applyin g a voltage of less than 6v (at 1khz) b e tw e e n te r m i n a l s. static life 10kv with 1500pf conde nser is disch a rged thro u g h 0 ? r e sistor. 200 times at an in terval of 10sec. rate of change 30%. characteristics of other items must meet the specified value. surge cur r e n t capacity the followin g impulse cu rrent for specified current appli ed 5 times at 60 secon d s intervals. thereafter, out er appe ara n c e shall be visually exa m ined. type impulse current vs < 400v 1.2/50 s & 8 / 20 s, 500a vs > 400v 1.2/50 s & 8 / 20 s, 500a, electrically connected with a resistor (1~2 ? ). no crack and no failures. cold resistance measuremen t after -40oc /1000 h r s & normal temperature/ 2 hrs. features are conformed to rated s pec . heat resistance measuremen t after 125oc /1000 h r s & normal temperature/ 2 hrs. humidity re sistance measuremen t after humidity 90~95%(4 5oc ) /1000 hrs & normal temperature/2 h r s . te mp e ratu r e c ycl e 10 times repetition of cycle -40oc /30min normal, temp/2 min 1 2 5oc / 3 0 m in , measuremen t after normal temp/2 hrs. solder ability apply flux an d immerse in molten sold er 2 3 0 5oc for 3sec up to the point of 1.5mm from body. ch eck for solder ad hesion. l e a d w i r e i s e v e n l y c o ve r e d b y solder. solder heat measuremen t after lead wire is dipped up to the point of 1.5mm from b ody into 260 5oc solder for 10sec. conformed t o rated spec. pull strength apply 0.5kg load for 10se c . lead shall n o t pull out or snap. flexural stre ngth be n d l e a d w i r e a t th e p o i nt of 2mm from body under 0.2 5 load and back to its original point. repe at 1 time. world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 5 wpspg spark gap protectors - l series 0 5 0 1 0 0 1 5 0 2 0 0 2 5 0 3 0 0 0 0 . 5 1 1 . 5 2 2 . 5 3 3 . 5 4 t i m e (mi n u t e s) t emper a t u r e (o c ) m a x i m u m w a v e 2 60 c c oo l i n g s ol de r i ng p r eh e ati ng peak t em p erat ure 26 0 oc d i p pi n g t i m e 10 seconds so lderi n g 1 time i te m c onditions flow/wave soldering recommendation parameters unit: mm item dimensions a 78 b 78 c 255 c b a l 5000 pcs m 2500 pcs h 1500 pcs s e r i e s m i n i m u m pack a g e q u a n t i t y r l p d1 z s t t t w d item w p t z r t s d d1 l l1 & l2 dimensions (mm) 52 1.5 5.0 0.5 6.0 1.0 1.2 max. leads cannot extend beyond tape. 3.2 max. 0.8 max. 1.5 ~ 4.5 0.5 .05 4.5 max 1 max lead t aping l1 l2 inner box dimensions world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
6 | wpspg spark gap protectors wpspg spark gap p r otectors ? m series (1) w orld pr oducts spark gap pr otector (2) dc spark-over v oltage t olerance: (example: 20=20% tolerance) (3) series t ype m = medium current (4) dc spark-over v oltage: (example: 200 = 200v) part numbering system fea tures: 1. rohs compliant and halogen free 2. ul497b ? file #e135015 (see specific voltage values) 3. fast responding 4. low capacitance 5. zero leakage current 6. stable electrical characteristics over time 7. can withstand repea t ed surges 8. symmetrical wpspg - 20 m 200 (1) (2) (3) (4) (5) ta (5) packaging: nil = bulk ta = taped/ammo box world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 7 wpspg spark gap protectors - m series dimensi ons in mm. electri cal characteristi cs 2 5 0 2 5 0 2 5 0 2 5 0 5 0 0 5 0 0 >1000a 100a >200 times 4.3 0.5 l 1 2.6 0.5 d d 0.5 0.05 colo r co de 1 colo r co de 2 colo r co de 3 d d l l1 l1 l 5 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 note: vsxx% (dc spark-over voltage tolerance 30% and 20%),140v device is only available in 30% tolerance. *ul 497b recognized (30% tolerance only). item 28.0 3.0 *wpspg-xxm140 *wpspg-xxm200 *wpspg-xxm220 *wpspg-xxm300 *wpspg-xxm400 *wpspg-xxm500 wpspg-xxm600 wpspg-xxm700 wpspg-xxm1000 wpspg-xxm1500 200 220 300 400 500 600 700 1000 140 1500 world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
8 | wpspg spark gap protectors wpspg spark gap protectors - m series part number color code 1 color code 2 color code 3 wpspg-xxm220 red red wpspg-xxm200 red wpspg-xxm400 yellow wpspg-xxm500 green wpspg-xxm600 blue wpspg-xxm700 purple wpspg-xxm1000 black n w o r b 0 0 5 1 m x x - g p s p w green wpspg-xxm140 black yellow wpspg-xxm300 orange red color code test methods and results item test met h od stand ar d dc spark over voltage(vs) measure starting discharge voltage (vs) by gradu ally increasing appli ed dc voltag e. test current is 0.5 m a max. an d the dc voltage ascends up within as follow condition. vs <1000v 100v/second vs >1000v 500v/second meet specified value insulation resistance(ir) measure the insulation resistance across the terminal at regular volta g e . but the test voltage doesn?t go beyond the dc spark-ove r voltage . capacitance measure the electros tatic capacitance by applyin g a voltage of less than 6v (at 1khz) b e tw e e n te r m i n a l s. static life 10kv with 1500pf conde nser is disch a rged th r o u g h 0 ? r e sistor. 200 times at an in terval of 10sec. rate of change 30%. characteristics of other items must meet the specified value. surge cur r e n t capacity the followin g impulse cu rrent for specified current appli ed 5 times at 60 secon d s intervals. thereafter, out er appe ara n c e shall be visually exa m ined. type impulse current vs < 400v 1.2/50 s & 8 / 20 s, 1000a vs > 400v 1.2/50 s & 8 / 20 s, 1000a, electrically connected with a resistor (1~2 ? ). no crack and no failures cold resistance measuremen t after -40oc /1000 h r s & normal temperature/ 2 hrs. features are conformed to rated s pec. heat resistance measuremen t after 125oc /1000 h r s & normal temperature/ 2 hrs. humidity re sistance measuremen t after humidity 90~95% (45oc) /1000 hrs & normal temperature/2 h r s . te mp e ra tu r e c ycl e 10 times repetition of cycle -40oc /30min normal, temp/2 min 1 2 5oc / 3 0 m in , measuremen t after normal temp/2 hrs. solder ability apply flux an d immerse in molten sold er 2 3 0 5oc for 3sec up to the point of 1.5mm from body. ch eck for solder ad hesion. l e a d w i r e i s e ve n l y co v e r e d b y solder. solder heat measuremen t after lead wire is dipped up to the point of 1.5mm from b ody into 260 5oc solder for 10sec. conformed t o rated spec. pull strength apply 0.5kg load for 10se c . lead shall n o t pull out or snap. flexural stre ngth be n d l e a d w i r e a t th e p o i nt of 2mm from body under 0.2 5 load and back to its original point. repe at 1 time. green world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 9 wpspg spark gap protectors - m series 0 5 0 1 0 0 1 5 0 2 0 0 2 5 0 3 0 0 0 0 . 5 1 1 . 5 2 2 . 5 3 3 . 5 4 t i m e (mi n u t e s) t emper a t u r e (o c ) m a x i m u m w a v e 2 60 c c oo l i n g s ol de r i ng p r eh e ati ng peak t em p erat ure 26 0 oc d i p pi n g t i m e 10 seconds so lderi n g 1 time i te m c onditions flow/wave soldering recommendation parameters unit: mm item dimensions a 78 b 78 c 255 c b a l 5000 pcs m 2500 pcs h 1500 pcs s e r i e s m i n i mum packa g e q u a n t i t y r l p d1 z s t t t w d item w p t z r t s d d1 l l1 & l2 dimensions (mm) 52 1.5 5.0 0.5 6.0 1.0 1.2 max. leads cannot extend beyond tape. 3.2 max. 0.8 max. 1.5 ~ 4.5 0.5 .05 3.0 - 7.5 1 max lead t aping l1 l2 inner box dimensions world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
10 | wpspg spark gap protectors wpspg spark gap p r otectors ? h series (1) w orld pr oducts spark gap pr otector (2) dc spark-over v oltage t olerance: (example: 20=20% tolerance) (3) series t ype h= high curr ent (4) dc spark-over v oltage: (example: 200 = 200v) part numbering system fea tures: 1. rohs compliant and halogen free 2. ul497b ? file #e135015 (see specific voltage values) 3. fast responding 4. low capacitance 5. zero leakage current 6. stable electrical characteristics over time 7. can withstand repeated surges 8. symmetrical wpspg - 20 h 200 (1) (2) (3) (4) (5) ta (5) packaging: nil = bulk ta = taped/ammo box world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 11 wpspg spark gap protectors - h series 4 0 0 2 5 0 1 0 0 5 0 0 2 5 0 1 0 0 wpspg- xxh 7 00 7 0 0 2 5 0 1 0 0 wpspg- xxh1 00 0 1 0 0 0 5 0 0 1 0 0 wpspg- xxh1 50 0 1 5 0 0 5 0 0 1 0 0 wpspg- xxh1 80 0 1 8 0 0 5 0 0 1 0 0 wpspg- xxh2 00 0 2 0 0 0 5 0 0 1 0 0 wpspg- xxh2 40 0 2 4 0 0 5 0 0 1 0 0 wpspg- xxh2 70 0 2 7 0 0 5 0 0 1 0 0 wpspg- xxh3 00 0 3 0 0 0 5 0 0 1 0 0 wpspg- xxh3 60 0 3 6 0 0 5 0 0 1 0 0 wpspg- xxh4 00 0 4 0 0 0 5 0 0 1 0 0 wpspg- xxh4 50 0 4 5 0 0 5 0 0 1 0 0 wpspg- xxh5 00 0 5 0 0 0 5 0 0 1 0 0 **>2000a >3 0 0 0a 1 00a >250 times 4.00.5 140v ? 700v l 1 3.10.5 d d 0.50.05 colo r co de 1 colo r co de 2 colo r co de 3 d d 1 l l1 l 5.3-0.5 1000v ? 5000v l 1 4 0 5 0 1 0 0 3 0 0 1 0 0 1 0 0 2 0 0 1 0 0 1 0 0 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 dc spark-over voltage *wpspg-xxh 140 * wpspg-xxh 200 * wpspg-xxh 300 * wpspg-xxh 400 * wpspg-xxh 500 electrical characteristics dimensions (in mm) * ul497b recognized (30% tolerance only). **parts rated 1000v ? 5000v 1.2/50 s and 8/20s, with 3000a rating add ?x? suffix to part number. note: vsxx% (dc spark-over voltage tolerance 30% and 20%), 1 40v device is only available in 30% tolerance. 28.03.0 world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
12 | wpspg spark gap protectors wpspg spark gap protectors - h series wpspg-xxh300 orange wpspg-xxh200 red wpspg-xxh500 green wpspg-xxh700 purple wpspg-xxh1000 brown black wpspg-xxh1500 brown green wpspg-xxh1800 brown gray wpspg-xxh2000 red black wpspg-xxh2400 re d yellow wpspg-xxh2700 re d purple wpspg-xxh3000 orange black wpspg-xxh3600 orange blue wpspg-xxh4000 yellow black wpspg-xxh4500 y e ll o w green wpspg-xxh5000 gr e en black wpspg-xxh140 black yellow wpspg-xxh400 yellow red red red red red red red red red red red test methods and results color code color code 1 color code 3 color code 2 partnumber item test met h od stand ar d dc spark over voltage(vs) measure starting discharge voltage (vs) by gradu ally increasing appli ed dc voltag e. test current is 0.5 m a max. an d the dc voltage ascends up within as follow condition. vs <1000v 100v/second vs >1000v 500v/second meet specified value insulation resistance(ir) measure the insulation resistance across the terminal at regular volta g e . but the test voltage doesn?t go beyond the dc spark-ove r voltage . capacitance measure the electros tatic capacitance by applyin g a voltage of less than 6v (at 1khz) b e twee n te r m ina l s. static life 10kv with 1500pf conde nser is disch a rged throug h 0 ? r e sistor. 200 times at an in terval of 10sec. rate of change 30%. characteristics of other items must meet the specified value. surge cur r e n t capacity the followin g impulse cu rrent for specified current appli ed 5 times at 60 secon d s intervals. thereafter, out er appe ara n c e shall be visually exa m ined. type impulse current vs <1000v 1.2/50 s & 8 / 20 s, 3000a, electrically connected with a resistor (1~2 ? ). vs >1000v 1.2/50 s & 8 / 20 s, 3000a, electrically connected with a resistor (4~6 ? ). no crack and no failures cold resistance measuremen t after -40oc /1000 h r s & normal temperature/ 2 hrs. features are conformed to rated s pec. heat resistance measuremen t after 125oc /1000 h r s & normal temperature/ 2 hrs. humidity re sistance measuremen t after humidity 90~95%(4 5oc ) /1000 hrs & normal temperature/2 h r s . te mp e ra tu r e c ycl e 10 times repetition of cycle -40oc /30min normal, temp/2 min 1 2 5oc / 3 0 m in , measuremen t after normal temp/2 hrs. solder ability apply flux an d immerse in molten sold er 2 3 0 5oc for 3sec up to the point of 1.5mm from body. ch eck for solder ad hesion. lea d w i r e i s e ve n l y cov e r e d b y solder. solder heat measuremen t after lead wire is dipped up to the point of 1.5mm from b ody into 260 5oc solder for 10sec. conformed t o rated spec. pull strength apply 0.5kg load for 10se c . lead shall n o t pull out or snap. flexural stre ngth be n d lea d w i r e a t th e p o i nt of 2mm from body under 0.2 5 load and back to its original point. repe at 1 time. world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 13 wpspg spark gap protectors - h series 0 5 0 1 0 0 1 5 0 2 0 0 2 5 0 3 0 0 0 0 . 5 1 1 . 5 2 2 . 5 3 3 . 5 4 t i m e (mi n u t e s) t emper a t u r e (o c ) m a x i m u m w a v e 2 60 c c oo l i n g s ol de r i ng p r eh e ati ng peak t em p erat ure 26 0 oc d i p pi n g t i m e 10 seconds so lderi n g 1 time i te m c onditions flow/wave soldering recommendation parameters unit: mm item dimensions a 78 b 78 c 255 c b a l 5000 pcs m 2500 pcs h 1500 pcs s e r i e s m i n i m u m pac k a g e q u a n t i t y r l p d1 z s t t t w d item w p t z r t s d d1 l l1 & l2 dimensions (mm) 52 1.5 5.0 0.5 6.0 1.0 1.2 max. leads cannot extend beyond tape. 3.2 max. 0.8 max. 1.5 ~ 4.5m 0.5 .05 3.0 - 7.5 1 max lead t aping l1 l2 inner box dimensions world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
14 | wpspg spark gap protectors wpspg spark gap p r otectors ? hx series wpspg - 20 hx 1000 (1) (2) (3) (4) (5) (1) w orld pr oducts spark gap pr otector (2) dc spark-over v oltage t olerance: (example: 20=20% tolerance) (3) series t ype (4) dc spark-over v oltage: (example: 1000 = 1000v) (5) packaging: nil = bulk ta = taped/ammo box ta part numbering system fea tures: 1. rohs compliant and halogen free 2. ul pending 3. fast responding 4. low capacitance 5. zero leakage current 6. stable electrical characteristics over time 7. can withstand repeated surges 8. bilateral and symmetrical 9. micro-gap design and low clamping 10. no dark effect hx = super high current/high voltage world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 15 wpspg spark gap protectors - hx series 0 0 1 0 0 5 0 0 0 1 0 0 0 1 hx x x - g p s p w 0 0 1 0 0 5 0 0 5 1 0 0 5 1 hx x x - g p s p w 0 0 1 0 0 5 0 0 8 1 0 0 8 1 hx x x - g p s p w 0 0 1 0 0 5 0 0 0 2 0 0 0 2 hx x x - g p s p w 0 0 1 0 0 5 0 0 4 2 0 0 4 2 hx x x - g p s p w 0 0 1 0 0 5 0 0 7 2 0 0 7 2 hx x x - g p s p w 0 0 1 0 0 5 0 0 0 3 0 0 0 3 hx x x - g p s p w 0 0 1 0 0 5 0 0 6 3 0 0 6 3 hx x x - g p s p w 0 0 1 0 0 5 0 0 0 4 0 0 0 4 hx x x - g p s p w 0 0 1 0 0 5 0 0 5 4 0 0 5 4 hx x x - g p s p w 0 0 1 0 0 5 0 0 0 5 0 0 0 5 hx x x - g p s p w 3 0 0 0a l 1 4.1 0.5 d d 0.50.05 colo r co de 1 colo r co de 2 colo r co de 3 d d l1 l1 l 9.0 1.5 28.0 3.0 l 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 --- --- --- 1200v (3 sec) 1500v (3 min) 1800v (3 sec) 1800v (3 sec) 2000v (1 min) 1200v (3 sec) 2000v (1 min) --- 1.0 electrical characteristics dimensions (in mm) note: vsxx% (dc spark-over voltage tolerance 30% and 20%). dc spark-over voltage insulation resistance capacitance measure starting discharge voltage (vs) b y gradually increasing applied dc voltage. test current is 1.0ma max. and the dc voltage ascends up within 500v/second. measure the insulation resistance acros s t h e terminal at regular voltage. test voltage may not exceed the dc spark-over voltage. measure the electrostatic capacitance b y a p plying a voltage of less than 6v (at 1khz) between terminals. ac wi th s tandi n g vo l ta g e world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
16 | wpspg spark gap protectors wpspg spark gap protectors - hx series color code part number color code 1 color code 2 color code 3 brown black brown green brown gray red black re d yellow re d purple orange black orange blue yellow black y e ll o w green gr e en black red red red red red red red red red red red wpspg-xxhx1000 wpspg-xxhx1500 wpspg-xxhx1800 wpspg-xxhx2000 wpspg-xxhx2400 wpspg-xxhx2700 wpspg-xxhx3000 wpspg-xxhx3600 wpspg-xxhx4000 wpspg-xxhx4500 WPSPG-XXHX5000 i tem test method s tan d ard cold resist ance measurement af ter -40 /48 hrs & normal temperature/ 2 hrs. features are conformed to rated spec. heat resist a nce measurement af ter +85 /48 hrs & normal temperature/ 2 hrs. humidity resist ance measurement af ter humidity 90~95 ( 4 5oc ) /48 hrs & normal temperature/2 hrs . t e mperature cycle 10 times repetition of cycle -40 /30mi n normal, temp/2 min 1 2 5 /30min, measurement af ter normal temp/2 hrs. solder ability apply flux and immerse in molten sold er 2305 for 3sec up to th e point of 1.5mm from body . check for sold er adhesion. l e a d w i r e i s e v e n l y c o v e r e d b y solder . so lde r he a t measurement af ter lead wire is dipped up to the point of 1.5mm from b ody into 260 5 solder for 10sec. conformed to rated spec. pull s t rength apply 0.5kg load for 10sec. lead shall not pull out or snap. flexural s t rength bend lead wi re at the point of 2mm fro m body under 0.25kg load and back to it s original point. repeat 1 time. surge life apply a st andard impulse current (8/20 s of 100a) for 300 times at 60 seconds intervals. no crack and no failures. surge current cap acity ch a r g e a 1 . 2/5 0 s & 8 / 20 s, 2000a, a nd apply it to the sample. do this 10 times. or 3000a, 1 time. test methods and resul ts world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 17 wpspg spark gap protectors - hx series 0 5 0 1 0 0 1 5 0 2 0 0 2 5 0 3 0 0 0 0 . 5 1 1 . 5 2 2 . 5 3 3 . 5 4 t i me (mi n u t e s) t emper a t u r e (o c ) m a x i m u m w a v e 2 60 c c oo l i n g s ol de r i ng p r eh e ati ng peak t em p erat ure 26 0 oc e m i t g n i p p i d 10 seconds so lderi n g 1 time i te m c onditions flow/wave soldering recommendation parameters sy mbol dimension(mm) w 52.01.5 p 10.00.5 l1-l2 1.0max. t 6.01.0 z 1.2max. r t e rminals must not project from t ape. t 3.2max. s 0.8max. d 4.6max. d 1 0.50.05 l 10.5max. axial taping packaging b c a sym bo l dimension( mm) quantity a 75.0 1000 pc s c 250 . 0 b 114 . 0 inner box drawing world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
18 | wpspg spark gap protectors wpspg spark gap p r otectors ? ls series wpspg - 20 ls 200 (1) (2) (3) (4) (5) (1) w orld pr oducts spark gap pr otector (2) dc spark-over v oltage t olerance: (example: 20=20% tolerance) (3) series t ype ls= low current surface mount series (4) dc spark-over v oltage: (example: 200 = 200v) (5) nil = standard package m = mini melf package m part numbering system fea tures: 1. rohs compliant and halogen free 2. ul497b ? pending 3. fast responding 4. low capacitance 5. zero leakage current 6. stable electrical characteristics over time 7. can withstand repea t ed surges 8. symmetrical world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 19 wpspg spark gap protectors - ls series dimensi on in mm. electri cal characteristi cs d c s p ark-over v ol t a ge minimum insulation resist ance max imum c a p a c it a nc e (1khz-6v m ax ) surge current cap acity ( 8/20 s ) part number vs(v) t e st v olt age(v) i r oh m ( m ) c(p f ) (a) 220 1 0 0 300 100 0.8 0.8 0.8 0.8 400 250 0.8 500 250 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 0.8 i tem l 4.0 0.5 d 2.1 0.5 d 2.0 0.5 t 0.4 0.1 3.4 0.5 1.4 0.5 1.3 0.5 0.4 0.1 2 0 0 1 0 0 1 4 0 5 0 500 500 500 500 500 500 note: vsxx% (dc spark-over voltage tolerance 30% and 20%),140v d e v ice is only available in 30% tolerance. wpspg-xxls140 wpspg-xxls200 wpspg-xxls220 wpspg-xxls300 wpspg-xxls400 wpspg-xxls500 600 250 1 0 0 0.8 500 wpspg-xxls600 700 250 1 0 0 0.8 500 wpspg-xxls700 1000 500 1 0 0 0.8 500 wpspg-xxls1000 standard mini melf st andard series d c s p ark-over v ol t a ge minimum insulation resist ance max imum c a p a c it a nc e (1khz-6v m ax ) surge current cap acity ( 8/20 s ) part number vs(v) t e st v olt age(v) i r oh m ( m ) c(p f ) (a) 300 1 0 0 0.8 0.8 0.8 1 0 0 1 0 0 1 0 0 2 0 0 1 0 0 1 4 0 5 0 300 300 300 note: vsxx% (dc spark-over voltage tolerance 30% and 20%),140v d e v ice is only available in 30% tolerance. wpspg-xxls140m wpspg-xxls200m wpspg-xxls300m mini melf series world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
20 | wpspg spark gap protectors wpspg spark gap protectors - ls series test methods and results item test met h od stand ar d dc spark over voltage(vs) measure starting discharge voltage (vs) by gradu ally increasing appli ed dc voltag e. test current is 0.5 m a max. an d the dc voltage ascends up within as follow condition. vs <1000v 100v/second vs >1000v 500v/second meet specified value insulation resistance(ir) measure the insulation resistance across the terminal at regular volta g e . but the test voltage doesn?t go beyond the dc spark-ove r voltage . capacitance measure the electros tatic capacitance by applyin g a voltage of less than 6v (at 1khz) b e tween te r m inal s. static life 10kv with 1500pf conde nser is disch a rged through 0 ? r e sistor. 200 times at an in terval of 10sec. rate of change 30%. characteristics of other items must meet the specified value. surge cur r e n t capacity the followin g impulse cu rrent for specified current appli ed 5 times at 60 secon d s intervals. thereafter, out er appe ara n c e shall be visually exa m ined. type impulse current mini melf 1.2/50 s & 8 / 20 s, 300a standard 1.2/50 s & 8 / 20 s, 500a no crack and no failures cold resistance measuremen t after -40oc /1000 h r s & normal temperature/ 2 hrs. features are conformed to rated s pec. heat resistance measuremen t after 125oc /1000 h r s & normal temperature/ 2 hrs. humidity re sistance measuremen t after humidity 90~95% (45oc) /1000 hrs & normal temperature/2 h r s . te mp e ra tu r e c ycl e 10 times repetition of cycle -40oc /30min normal, temp/2 min 1 2 5oc / 3 0 m in , measuremen t after normal temp/2 hrs. solder ability apply flux an d immerse in molten sold er 2 3 0 5oc for 3sec up to the end surfa c e of the electrodes. check for solder adh esion . th e end su r fa ce i s evenly covered by solder. solder heat measuremen t after the end surface of the electrodes is dipped up to into 260 5oc solder for 10sec. conformed t o rated spec. world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 21 wpspg spark gap protectors - ls series taping specifications i te m s tandard series mini mel f series p 4. 0 0. 1 p 0 8. 0 0. 1 w 12. 0 0. 3 f 5.5 0. 1 e 1. 7 5 0. 1 d 1. 5 0 . 1 k 2.3 0. 2 t 0. 5 m ax. a 0 2.2 0. 1 b 0 4. 3 0. 1 i te m standard siz e d 178 m m d 13 m m l 1 5 m m l d d note: 3000 pcs per reel. ite m s i z e (mm) a 185 b 179 c 67 4. 0 0. 1 4. 0 0. 1 8. 0 0. 3 3. 4 0. 1 1. 5 0. 1 1. 5 0 . 1 1. 6 0. 1 0. 2 0. 1 1. 6 0. 1 4. 0 0. 1 m ini m elf seri es 178 m m 13 m m 1 1 m m no te: a ll dim ensions (mm) world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
22 | wpspg spark gap protectors wpspg spark gap p r otectors ? ms series wpspg - 20 m 200 (1) (2) (3) (4) (1) w orld pr oducts spark gap pr otector (2) dc spark-over v oltage t olerance: (example: 20=20% tolerance) (3) series t ype (4) dc spark-over v oltage: (example: 200 = 200v) part numbering system fea tures: 1. rohs compliant and halogen free 2. ul497b ? file #e135015 (see specific voltage values) 3. fast responding 4. low capacitance 5. zero leakage current 6. stable electrical characteristics over time 7. can withstand repea t ed surges 8. symmetrical r 20 ms= medium current surface mount series world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 23 wpspg spark gap protectors - ms series dimensi on in mm. electri cal characteristi cs d c s p ark-over v ol t a ge minimum insulation resist ance max imum c a p a c it a nc e (1khz-6v m ax ) surge current cap acity ( 8/20 s ) part number vs(v) t e st v olt age(v) i r oh m ( m ) c(p f ) (a) 220 1 0 0 300 100 0.8 0.8 0.8 0.8 400 250 0.8 500 250 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 0.8 i tem l 5.0 0.5 d 2.8 0.5 d 2.6 0.5 t 0.4 0.1 200 1 0 0 140 5 0 1000 1000 1000 1000 1000 1000 note: vsxx% (dc spark-over voltage tolerance 30% and 20%),140v device is only available in 30% tolerance. *ul 497b recognized (30% tolerance only). *wpspg-xxms140 *wpspg-xxms200 *wpspg-xxms220 *wpspg-xxms300 *wpspg-xxms400 *wpspg-xxms500 600 250 1 0 0 0.8 1000 wpspg-xxms600 700 250 1 0 0 0.8 1000 wpspg-xxms700 1000 500 1 0 0 0.8 1000 wpspg-xxms1000 world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
24 | wpspg spark gap protectors wpspg spark gap protectors - ms series test methods and resul ts item test met h od stand ar d dc spark over voltage(vs) measure starting discharge voltage (vs) by gradu ally increasing appli ed dc voltag e. test current is 0.5 m a max. an d the dc voltage ascends up within as follow condition. vs <1000v 100v/second vs >1000v 500v/second meet specified value insulation resistance(ir) measure the insulation resistance across the terminal at regular volta g e . but the test voltage doesn?t go beyond the dc spark-ove r voltage . capacitance measure the electros tatic capacitance by applyin g a voltage of less than 6v (at 1khz) b e tw e e n te r m i n a l s. static life 10kv with 1500pf conde nser is disch a rged throu g h 0 ? r e sistor. 200 times at an in terval of 10sec. rate of change 30%. characteristics of other items must meet the specified value. surge cur r e n t capacity the followin g impulse cu rrent for specified current appli ed 5 times at 60 secon d s intervals. thereafter, out er appe ara n c e shall be visually exa m ined. impulse current 1.2/50 s & 8 / 20 s, 1000a, electrically connected with a resistor (1~2 ? ). no crack and no failures cold resistance measuremen t after -40oc /1000 h r s & normal temperature/ 2 hrs. features are conformed to rated s pec . heat resistance measuremen t after 125oc /1000 h r s & normal temperature/ 2 hrs. humidity re sistance measuremen t after humidity 90~95%(4 5oc ) /1000 hrs & normal temperature/2 h r s . te mp e ra tu r e c ycl e 10 times repetition of cycle -40oc /30min normal, temp/2 min 125oc/ 3 0 m in , measuremen t after normal temp/2 hrs. solder ability apply flux an d immerse in molten sold er 2 3 0 5oc for 3sec up to the end surfa c e of the electrodes. check for solder adh esion . th e e n d su r fa ce i s even l y cover e d by solder. solder heat measuremen t after the end surface of the electrodes is dipped up to into 260 5 oc solder for 10sec. conformed t o rated spec. world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 25 wpspg spark gap protectors - ms series taping specifications ite m s i z e (mm) a 185 b 179 c 67 i te m s i z e (mm) p 4. 0 0. 1 p 0 1 . 0 0 . 4 w 2 . 0 0 . 2 1 f 5 0 . 0 0 5 . 5 e 1 . 0 5 . 1 d 1 . 0 5 . 1 k 1 . 0 0 . 3 t 5 0 . 0 0 3 . 0 a 0 1 . 0 0 . 3 b 0 1 . 0 0 . 6 i te m s i z e (mm ) d 178 m m d 13 m m l 15 m m l d d note: 1500 pcs per reel. world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
26 | wpspg spark gap protectors wpspg spark gap p r otectors ? hs series wpspg - 20 hs 200 (1) (2) (3) (4) (1) w orld pr oducts spark gap pr otector (2) dc spark-over v oltage t olerance: (example: 20=20% tolerance) (3) series t ype hs= high curr ent surface mount series (4) dc spark-over v oltage: (example: 200 = 200v) part numbering system fea tures: 1. rohs compliant and halogen free 2. ul497b ? file #e135015 (see specific voltage values) 3. fast responding 4. low capacitance 5. zero leakage current 6. stable electrical characteristics over time 7. can withstand repea t ed surges 8. symmetrical world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 27 wpspg spark gap protectors - hs series dimensi on electri cal characteristi cs d c s p ark-over v olt a ge minimum insulation resist ance max imum c a p a c it a nc e (1khz-6v m ax ) surge current cap acity ( 8/20 s ) part number vs(v) t e st v olt age(v) i r oh m ( m ) c(p f ) (a) *wpspg- xxh s3 0 0 3 0 0 1 0 0 *wpspg- xxh s5 0 0 5 0 0 2 5 0 0.8 0.8 0.8 0.8 wpspg- xxh s7 0 0 7 0 0 2 5 0 0.8 wpspg- xxh s1 0 0 0 1000 500 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 0.8 i tem l 6.00.5 d 3.30.5 d 3.10.5 t 0.40.1 *wpspg- xxh s2 0 0 2 0 0 1 0 0 *wpspg- xxh s1 4 0 1 4 0 5 0 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 0 *wpspg- xxh s4 0 0 4 0 0 2 5 0 0.8 1 0 0 3 0 0 0 3 0 0 0 3 0 0 0 note: vsxx% (dc spark-over voltage tolerance 30% and 20%),140v device is only available in 30% tolerance. *ul 497b recognized (30% tolerance only). world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
28 | wpspg spark gap protectors wpspg spark gap protectors - hs series test methods and results item test met h od stand ar d dc spark over voltage(vs) measure starting discharge voltage (vs) by gradu ally increasing appli ed dc voltag e. test current is 0.5 m a max. an d the dc voltage ascends up within as follow condition. vs <1000v 100v/second vs >1000v 500v/second meet specified value insulation resistance(ir) measure the insulation resistance across the terminal at regular volta g e . but the test voltage doesn?t go beyond the dc spark-ove r voltage . capacitance measure the electros tatic capacitance by applyin g a voltage of less than 6v (at 1khz) b e twee n te r m ina l s. static life 10kv with 1500pf conde nser is disch a rged throug h 0 ? r e sistor. 200 times at an in terval of 10sec. rate of change 30%. characteristics of other items must meet the specified value. surge cur r e n t capacity the followin g impulse cu rrent for specified current appli ed 5 times at 60 secon d s intervals. thereafter, out er appe ara n c e shall be visually exa m ined. impulse current 1.2/50 s & 8 / 20 s, 3000a, electrically connected with a resistor (2~4 ? ). no crack and no failures cold resistance measuremen t after -40oc /1000 h r s & normal temperature/ 2 hrs. features are conformed to rated s pec . heat resistance measuremen t after 125oc /1000 h r s & normal temperature/ 2 hrs. humidity re sistance measuremen t after humidity 90~95%(4 5oc ) /1000 hrs & normal temperature/2 h r s . te mp e ra tu r e c ycl e 10 times repetition of cycle -40 oc /30min normal, temp/2 min 1 2 5oc / 3 0 m in , measuremen t after normal temp/2 hrs. solder ability apply flux an d immerse in molten sold er 2 3 0 5oc for 3sec up to the end surfa c e of the electrodes. check for solder adh esion . th e e n d su r fa ce i s evenl y covere d by solder. solder heat measuremen t after the end surface of the electrodes is dipped up to into 260 5oc solder for 10sec. conformed t o rated spec. world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors
wpspg spark gap protectors | 29 wpspg spark gap protectors - hs series taping specifications ite m s i z e ( m m) p 4. 0 0. 1 p 0 8. 0 0. 1 w 16. 00 0. 2 f 7. 5 0. 05 e 1. 75 0. 1 d 1. 5 0. 1 k 3. 5 0. 1 t 0. 5m a x a 0 b 0 i te m s i z e ( m m ) d 330 m m d 13 m m l 20 m m ite m s i z e (mm) a 330 b 330 c 40 note: 2000 pcs per reel. 3.5 0.1 6.5 0.1 world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 1.8 wp spg - spark gap protectors

▲Up To Search▲

Price & Availability of WPSPG-XXHX5000

	To Download WPSPG-XXHX5000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .