jC0 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com j slide c&k 1000 series miniature slide switches features/benefits ? v ariety of actuators and terminations ? panel mount tabs available ? epoxy terminal sealompatible with bottom-wash cleaning ? rohs compliant typical applications ? t est & measurement equipment ? t elecommunications ? computer & peripherals specifications contact rating: b contact material: 0.4 va max. @ 20 v ac or dc max. q contact material: 6 amps @120 v ac or 28 v dc, 3 amps @ 250 v ac. see page j-15 for additional ratings. electrical life: 100,000 make-and-break cycles at full load on models with b, k or p contact material; 40,000 cycleson models with g, q, l, m, s or r contact material. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. dielectric strength: 1,000 v rms min. @ sea level. operating temperature: C0?oto 65? solderability: per mil-std-202f method 208d, or eia rs-186e method 9 (1 hour steam aging). materials case: diallyl phthalate (dap), (ul 94v-0). actuator: nylon, black, standard. housing: stainless steel. switch suppor t: brass or steel, matte-tin plated. end contacts: b contact material: copper alloy, with gold plate over nickel plate. q contact material: coin silver , silver plated. see page i-16 for additional contact materials. center contact & all terminals: b contact material: copper alloy, with gold plate over nickel plate. q contact material: copper alloy, silver plated. see page j-15 for additional contact materials. terminal seal: epoxy . refer to soldering and cleaning in t echnical data chapter note: any models supplied with q, b, g, p, s or r contact material are rohs compliant. for the latest information r egar ding rohs compliance, please go to: www .ittcannon.com/rohs. note: specifications and materials listed above are for switches with standard options. for information on specific and custom switches, consult customer service center. build-a-switch to order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages jC1 thr ough jC5. for additional options not shown in catalog, consult customer service center . all models have epoxy terminal seal and are compatible with all ottom--ash?cb cleaning methods. switch function 1101 sp on-none-on 1103 sp on-off-on 1108 sp mom-none-on 1201 dp on-none-on 1203 dp on-off-on mounting style m2 pc mount without tabs m1 panel mount with tabs actuator s3 .200" high s1 .040" high s2 .140" high s4 .285" high s5 .370" high s6 .485" high t3 .200" high contact material b gold q silver k gold, tin-lead m silver, tin-lead g gold over silver l gold over silver , tin-lead p gold, matte-tin s silver , matte-tin r gold over silver , matte-tin seal e epoxy d no epoxy seal i epoxy potted base actuator color 2 black 1 white 3 red 7 blue terminations a right angle, pc thru-hole c pc thru-hole av2 vertical right angle, pc thru-hole z solder lug v3 v-bracket v4 v -bracket w .750" long, wire wrap z3 quick connect models a vailable
jC1 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com j slide c&k 1000 series miniature slide switches switch function mounting style p anel mounting all actuators except t3. single pole for t3 actuator only. double pole m2 pc mounting without tabs m1 panel mounting with tabs actuator shown in position 1 dpdt 2-3,5-6 open 2-1,5-4 on none on on off on 1201 1203 dp actuator shown in position 1 spdt 2-3 n/a open n/a 1-2 on none on on off on mom. none on 1101 1103 1108 sp schematic connected terminals pos. 1 pos. 2 pos. 3 switch function pos. 1 pos. 2 pos. 3 model no. no. poles dpdt spdt mom. = momentary all models with all options when or dered with g, l, m, s or r contact material. terminal nos. for reference only t erminal nos. for refer ence only part number shown: 1101m2s3cqe2 part number shown: 1201m2s3cqe2 note: available with a, av2, c, v3, v4, w terminations only. note: available with c, w, z, z3 terminations only. no mounting har dwar e supplied.
jC2 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com j slide c&k 1000 series miniature slide switches actuator terminations * 120x models only. * 110x models only. * * * * * 120x models only. pc mounting .750 (19,05) c pc thru-hole z solder lug w wire wrap z3 quick connect t3 .200" high s6 .485" high s5 .370" high s4 .285" high s3 .200" high s2 .140" high s1 .040" high spdt & dpdt spdt & dpdt spdt & dpdt spdt & dpdt 2 black 1 white 3 red 7 blue 9 gra y actua tor color option code other colors available, consult customer service center. not available with k, l, m, p, s or r contact materials. not available with k, l, m, p , s or r contact materials. mating quick connector available; order part number 530100000, page j-15. * subtract .014 (0,36) fr om actuator height, all models with a, a v2, v3, v4 terminations. actuator actuator color
jC3 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com j slide c&k 1000 series miniature slide switches terminations pc mounting actuator shown in pos. 1 section a-a pc mo unting actuator shown in pos. 1 section a-a pc mo unting av2 vertical right angle, pc thru-hole, .150" pitch a right angle, pc thru-hole a right angle, pc thru-hole actuator shown in pos. 1 section a-a 1101m2s3abe2 horizontal actuation spdt 1201m2s3abe2 horizontal actuation dpdt 1101m2s3a v2be2 vertical actuation spdt not available with m1 mounting style, i seal option. terminal bend radii and lead-in manufacturing option. not available with m1 mounting style, i seal option. t erminal bend radii and lead-in manufacturing option. not available with m1 mounting style, i seal option. t erminal bend radii and lead-in manufacturing option.
jC4 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com j slide c&k 1000 series miniature slide switches terminations pc mounting pc mo unting pc mounting actuator shown in pos. 1 section a-a actuator shown in pos. 1 actuator shown in pos. 1 not available with m1 mounting style, i seal option. terminal bend radii and lead-in manufacturing option. not available with m1 mounting style and i seal. not available with m1 mounting style and i seal. av2 vertical right angle, pc thru-hole, .150" pitch v3, v4 vertical mount, v-bracket v3, v4 vertical mount, v -bracket 1201m2s3av2be2 vertical actuation dpdt 1101m2s3__be2 spdt 1201m2s3__be2 dpdt v3 .350 (8,89) v4 .525 (13,34) dim option code v3 .400 (10,16) v4 .575 (14,61) dim option code
jC5 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com j slide c&k 1000 series miniature slide switches contact material available hardware gold 3 tin-lead 6 matte-tin 7 0 4 va max @ 20 v ac or dc max or 6 amps @ 120 v ac or 0.4 max. 28 v dc; 3 amps @ 250 v ac. 6 amps @ 120 v ac or 28 v dc; 3 amps @ 250 v ac. 0.4 va max. @ 20 v ac or dc max. low level/dry circuit or power power low level/ dry circuit gold over silver 2,3 sil ver 4,5 gold 1 option code terminal pla ting ra tings cont act material 1 contacts & terminals: copper alloy, with gold plate over nickel plate. 2 end contacts: coin silver, with gold plate over nickel plate. 3 center contacts & all terminals: copper alloy, with gold plate over nickel plate. 4 end contacts: coin silver, silver plated. 5 center contact & all terminals: copper alloy, silver plated. 6 terminals: copper alloy , with tin-lead alloy over nickel plate. 7 terminals: copper alloy, with matte-tin over nickel plate. all models with all options when ordered with g, l, m, q, s or r contact material. b contact material standard with all terminations except c, z, z3.. q contact material standar d with c, z, z3 terminations. k, l, m, p, s or r contact materials not available with z, z3 terminations. seal d no epoxy seal i epoxy potted base e epoxy seal fits z3 termination female connector p ar t no. 530100000 available in loose pieces. note: available with c, w, w3, z, z3 terminations only. note: any models supplied with q, b, g, p, s or r contact material are rohs compliant. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. b k p q m s g l r gold 3 tin-lead 6 matte-tin 7 gold 3 tin-lead 6 matte-tin 7 * note: see technical data section of this catalog for rohs compliant and compatible definitions and specifications. rohs compliant rohs compliant yes no yesyes no yesyes no yes yes yes yesyes yes yesyes yes yes
|
