model name 7311s-gf simple packaged crystal oscillator (spxo) 7300 series co25_091009_7311s-gf_e pb free for sonet-, sdh-, and gbethernet-related equipment crystal oscillator n specifications n features n main application l power supply voltage is 2.5 v, lvpecl output level. l output frequency range are 62.5 to 313 mhz. l ultra-compact with dimensions of 7.0 x 5.0 x 1.7 mm. l a surface-mount crystal oscillator. nominal frequency range (mhz) supply voltage [v cc ] (v) load resistance current during operation consumption during standby output level operating temperature range frequency tolerance symmetry phase jitter (rms) stand-by function (tristate) number for specifying an order 62.5 to 220 +2.5 5 % 50 (to vcc?2.0 v) max. 88 ma (typ. 55 ma) max. 30 a lvpecl (complementary) 0 to +70 0 to +85 ?40 to +85 max. 2510 ?6 max. 50 10 ?6 max. 100 10 ?6 max. 50 10 ?6 max. 100 10 ?6 45 % to 55 % (at 50% waveform) max. 1ps (12 khz to 20 mhz) available nsa3344b nsa3345b nsa3346b nsa3345k nsa3346k item model classification 220 to 313 +2.5 5 % 50 (to vcc?2.0 v) max. 88 ma (typ. 55 ma) max. 30 a lvpecl (complementary) 0 to +85 ?40 to +85 max. 50 10 ?6 max. 100 10 ?6 max. 50 10 ?6 max. 100 10 ?6 45 % to 55 % (at 50% waveform) max. 1ps (12 khz to 20 mhz) available nsa3345f nsa3346f nsa3345f nsa3346f 7311s gf-255r gf-505x gf-104x gf-505p gf-104p 7311s gf-505x gf-104x gf-505p gf-104p nominal frequency range (mhz) supply voltage [v cc ] (v) load resistance current during operation consumption during standby output level operating temperature range frequency tolerance symmetry phase jitter (rms) stand-by function (tristate) number for specifying an order item model classification
model name 7311s-gf simple packaged crystal oscillator (spxo) 7300 series co26_090925_7311s-gf_e n dimensions n standby function table (tristate) #1 input level h (v ih 0.7 v cc ) or open level l (v il 0.3 v cc ) #4 and #5 output oscillation output on high impedance when ordering +2.5 v, max. 10010 -6 /0 to 85 c, 156.25 mhz 7311s-gf-104x-156.25m-nsa3346b if you have any queries concerning our standard frequencies and numbers for specifying orders, please contact our sales represe ntatives or visit our homepage (http://www.ndk.com/). CC m number for specifying an order frequency (up to 8 digits) model name n how to specify an order crystal oscillator mm 7.0 0.1 1.7 0.2 5.0 0.1 5.08 0.1 #1 #2 #4 #5 #6 #3 2.6 0.1 1.2 0.1 3.9 1.5 land pattern (typical) 1.4 0.1 5.08 1.6 2.54 cby=0.01f #1 #2 #3 #4 #5 #6 stand-by n.c gnd output output v cc terminal land connections
|