e-series 2 way 0 o power divider 5 - 1000 mhz ESSMJ-2-12-75 m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel.+85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax+44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v2.00 s 1226 e features 2 way 0 degree surface mount 75 ohm description m/a- coms ESSMJ-2-12-75 is a 2 way 0 o power divider in a low cost, surface mount package. ideally suited for high volume catv applications. e-series 2-way 0 o power divider 5 - 1000 mhz ESSMJ-2-12-75 parameter units typical minimum maximum frequency range 5 - 1000 mhz insertion loss 5 - 500 mhz 500 - 1000 mhz db db 0.4 0.5 0.6 1.2 isolation 5 - 600 mhz 600 - 1000 mhz db db 35 30 20 17.5 amplitude unbalance 5 - 600 mhz 600 - 1000 mhz db db 0.2 0.5 phase unbalance 5 - 100 mhz 100 - 500 mhz 500 C1000mhz o o o 1.5 o 3.5 o 4.0 o output return loss 5 - 40 mhz 40 - 1000 mhz db db 20 25 12 20 input return loss 5 - 40 mhz 40 - 500 mhz 500 - 860 mhz 860-1000 mhz db db db db 20 24 21 19 13.5 20 17 14 insertion loss flatness db 0.9 electrical specifications @25 c please note that the photograph above indicates package shape only, unit may be wired differently. sm-44 package
e-series 2 way 0 o power divider 5 - 1000 mhz ESSMJ-2-12-75 m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/pacific: tel.+85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax+44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. specifications subject to change without notice. v2.00 s 1226 e absolute maximum ratings parameter absolute maximum rf power 1 watt internal load dissipation 0.125 watt pin temp (10 sec) 260c storage temperature -55c to 100c operating temperature -25c to 85c functional configuration function pin no. not connected 2,5 external 75 ohms ground 1 case ground input 6 port 1 4 port 2 3 typical performance @ +25c insertion loss -4.00 -3.80 -3.60 -3.40 -3.20 -3.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 frequency (mhz) db isolation -50.00 -40.00 -30.00 -20.00 -10.00 0.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 frequency (mhz) db amplitude unbalance -0.06 -0.02 0.02 0.06 0.10 0.14 0.18 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 frequency (mhz) db phase unbalance -1.00 -0.50 0.00 0.50 1.00 1.50 2.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 frequency (mhz) degrees output return loss -40.00 -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 frequency (mhz) db input return loss -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 5.00 104.50 204.00 303.50 403.00 502.50 602.00 701.50 801.00 900.50 1000.00 frequency (mhz) db
|
