hlmp-1600 t?1 3 / 4 (5 mm), t ? 1 (3 mm), 5 volt, 12 volt, integrated resistor led lamps data sheet figure a. t-1 package. figure b. t-1 3 / 4 package. package dimensions hlmp-1600, hlmp-1601, hlmp-1620, hlmp-1621 hlmp-1640, hlmp-1641, hlmp-3600, hlmp-3601 hlmp-3650, hlmp-3651, hlmp-3680, hlmp-3681 features ? f integralfcurrentflimitingfresistor ? f ttlfcompatible f requiresfnofexternalfcurrentflimiterfwithf5fvolt/12fvoltf supply ? f costfefective f savesfspacefandfresistorfcost ? f widefviewingfangle ? f availablefinfallfcolors f red,fhighfefciencyfred,fyellow,fandfhighfperformancef greenfinft-1fandft -13/4f packages description thef 5f voltf andf 12f voltf seriesf lampsf containf anf integralf cur f rentflimitingfresistorfinfseriesfwithfthefled.fthisfallowsf theflampftofbefdrivenffromfaf5fvolt/12fvoltfsourcefwithoutf anf externalf currentf limiter.fthef redf ledsf aref madef fromf gaaspfonfafgaasfsubstrate.fthefhighfefciencyfredfandf yellowfdevicesfusefgaaspfonfafgapfsubstrate. thefgreenfdevicesfusefgapfonfafgapfsubstrate.fthefdifusedf lampsfprovidefafwidefof-axisfviewingfangle. theft-1 3 / 4 flampsfarefprovidedfwithfsturdyfleadsfsuitablef forfwirefwrapfapplications.ftheft -1 3 / 4 flampsfmayfbeffrontf panelfmountedfbyfusingfthefhlmp-0103fclipfandfring. 1.02 (0.040) nom. 3.43 (0.135) 2.92 (0.115) 24.13 (0.95) min. 4.70 (0.185) 4.19 (0.165) 3.18 (0.125) 2.67 (0.105) 2.54 (0.100) nom. 1.27 (0.050) nom. 6.35 (0.250) 5.58 (0.220) 0.45 (0.018) square nom. 0.65 (0.026) max. cathode 6.1 (0.240) 5.6 (0.220) 23.0 (0.90) min. 0.64 (0.025) square nominal 2.54 (0.100) nom. cathode 1.27 (0.050) nom. 0.89 (0.035) 0.64 (0.025) 9.19 (0.362) 8.43 (0.332) 11.56 (0.455) 10.80 (0.425) 1.32 (0.052) 1.02 (0.040) 5.08 (0.200) 4.57 (0.180) notes: 1. all dimensions are in millimeters (inches). 2. an epoxy meniscus may extend about 1 mm (0.040") down the leads.
2 selection guide color package description package outline 2 q 1/2 [1] operating voltage (v) part number hlmp- luminous intensity iv (mcd) min. max. redf t-1ftintedfdifusedf af 60f f 5f 1600f 2.1f - 1600-d00xxf 2.1f - 60f f f 12f 1601f 2.1f - 1601-d00xxf 2.1f - 1601-gh0xxf 8.6f 27.6f t-1f3/4ftintedfdifusedf bf 60f f 5f 3600f 2.1f - 3600-d00xxf 2.1f - 60f f 12f 3601f 2.1f - 3601-d00xxf 2.1f - yellowf t-1ftintedfdifusedf af 60f f f f 5f 1620f 2.2f - 1620-c00xxf 2.2f - 1620-c0bxxf 2.2f - 1620-efbxxf 3.4f 10.8f 60f f 12f 1621f 2.2f - 1621-c00xxf 2.2f - t-1f3/4ftintedfdifusedf bf 60f f 5f 3650f 2.2f - 3650-c00xxf 2.2f - 60f f 12f 3651f 2.2f - 3651-c00xxf 2.2f - greenf t-1ftintedfdifusedf af 60f f f f 5f 1640f 1.6f - 1640-b00xxf 1.6f - 1640-b0dxxf 1.6f - 1640-de0xxf 4.2f 13.4f 60f f 12f 1641f 1.6f - 1641-b00xxf 1.6f t-1f3/4ftintedfdifusedf bf 60f f 5f 3680f 1.6f - 3680-b00xxf 1.6f - 60f f 12f 3681f 1.6f - 3681-b00xxf 1.6f - note: 1.f q 1/2 fisfthefof-axisfanglefatfwhichfthefluminousfintensityfisf1/2fthefaxialfluminousfintensity.
3 absolute maximum ratings at t a = 25c red/her/yellow 5 volt lamps red/her/yellow 12 volt lamps green 5 volt lamps green 12 volt lamps dcfforwardfvoltagef(taf=f25c)f 7.5fvolts [2]f 15fvolts [3] f 7.5fvolts [2] f 15fvolts [3] f reversefvoltagef(irf=f100f a)f 5fvoltsf 5fvoltsf 5fvoltsf 5fvoltsf operatingftemperaturefrangef -40cftof85cf -40cftof85cf -20cftof85cf -20cftof85cf storageftemperaturefrangef -40cftof100cf -40cftof100cf -40cftof100cf -40cftof100cf notes: 2.ff derateffromft a f=f50cfatf0.071fv/c,fseeffiguref3. 3.ff derateffromft a f=f50cfatf0.086fv/c,fseeffiguref4. part numbering system hlmx-x fff6fffxf xf xf xf xf xx mechanical option 00:fbulk 01:ftapef&freel,fcrimpedfleads 02:ftapef&freel,fstraightfleads a1,b1:frightfanglefhousing,funevenfleads a2,b2:frightfanglefhousing,fevenfleads color bin options 0:ffullfcolorfbinfdistribution b:fcolorfbinf2&3fonly d:fcolorfbinf4&5fonly maximum iv bin options 0:fopenf(no.fmax.flimit) others:fpleasefreferftofthefivfbinftable minimum iv bin options pleasefreferftofthefivfbinftable operating voltage 0:f5fv 1:f12fv color options 0:fgapfher 2,5:fgapfyellow 4,8:fgapfgreen package options 3:ft-1 3 / 4 f(5fmm) 1:ft-1f(3fmm)
4 electrical/optical characteristics at t a = 25c symbol description high efciency red yellow green unit test condition min. typ. max. min. typ. max. min. typ. max. l p f peakf f wavelengthf 635f 583f 565f nmf l d f dominantf f wavelengthf 626f 585f 569f nmf notef4f dl 1 / 2 f spectralflinef halfwidthf 40f 36f 28f nmf r q j-pinf thermalf f resistancef 290f 290f 290f c/wf junctionftof cathodefleadf (notef6)f r q j-pin f thermalf f resistancef 210f 210f 210f c/wf junctionftof cathodefleadf (notef7)f i f f forwardfcurrentf 12fvfdevicesf 13f 20f 13f 20f 13f 20f maf v f f=f12fvf i f f forwardfcurrentf 5fvfdevicesf 10f 15f 10f 15f 10f 15f maf v f f=f5fvf h vf luminousf f efcacyf 145f 500f 595f lumenf/ wattf notef2f v r f reversef f breakdownf f voltagef 5.0f 5.0f 5.0f vf i r f=f100f af notes: 4.f thefdominantfwavelength,f l d ,fisfderivedffromfthefciefchromaticityfdiagramfandfrepresentsfthefsinglefwavelengthfwhichfdefnesfthefcolorfoffthef device. 5.f radiantfintensity,fi e ,finfwatts/steradian,fmayfbeffoundffromfthefequationfi e f=fl v / h v ,fwherefl v fisfthefluminousfintensityfinfcandelasfandf h v fisfthef luminousfefcacyfinflumens/watt. 6.f forffigurefafpackageftype. 7.f forffigurefbfpackageftype.
5 figure 6. relative luminous intensity vs. angular displacement for t-1 3 / 4 package. figure 5. relative luminous intensity vs. angular displacement for t-1 package. figure 1. forward current vs. applied forward voltage. 5 volt devices. figure 2. forward current vs. applied forward voltage. 12 volt devices. figure 4. maximum allowed applied forward voltage vs. ambient temperature r q ja = 175c/w. 12 volt devices. figure 3. maximum allowed applied forward voltage vs. ambient temperature r q ja = 175c/w. 5 volt devices. i f ? forward current ? ma 0 0 v cc ? applied forward voltage ? v 16 12 4 7.5 26 81 01 4 24 20 16 12 8 4 15 i f ? forward current ? ma 0 0 v cc ? applied forward voltage ? v 16 12 4 7.5 26 81 01 4 24 20 16 12 8 4 15 v cc ? applied forward voltage ? v 0 0 t a ? ambient temperature ? c 85 20 40 60 80 7.5 8 6 4 2 v cc ? applied forward voltage ? v 0 0 t a ? ambient temperature ? c 85 20 40 60 80 15 16 12 8 4 10 100 40 70 20 60 80 30 50 90 0 10 20 30 40 50 60 70 80 90 1.0 0.6 0.8 0.2 0.4 10 100 40 70 20 60 30 50 0 10 20 30 40 50 60 70 80 90 1.0 0.6 0.8 0.2 0.4 80 90
6 figure 8. relative luminous intensity vs. applied forward voltage. 12 volt devices. figure 7. relative luminous intensity vs. applied forward voltage. 5 volt devices. 2.5 2.0 gaasp 0.5 0 0 1 0 24 5 volt devices relative i v 68 1.5 1.0 high efficiency red, yellow, green 1.5 1.0 gaasp 0.5 0 02 20 48 6 12 volt devices relative i v high efficiency red, yellow, green 10 12 14 16 18 intensity bin limit color bin intensity range (mcd) min. max. redf df 2.4f 3.8f ef 3.8f 6.1f ff 6.1f 9.7f gf 9.7f 15.5f hf 15.5f 24.8f if 24.8f 39.6f jf 39.6f 63.4f kf 63.4f 101.5f lf 101.5f 162.4f mf 162.4f 234.6f nf 234.6f 340.0f of 340.0f 540.0f pf 540.0f 850.0f qf 850.0f 1200.0f rf 1200.0f 1700.0f sf 1700.0f 2400.0f tf 2400.0f 3400.0f uf 3400.0f 4900.0f vf 4900.0f 7100.0f wf 7100.0f 10200.0f xf 10200.0f 14800.0f yf 14800.0f 21400.0f zf 21400.0f 30900.0f maximumftolerancefforfeachfbinflimitfisf18%. intensity bin limit (con't) color bin intensity range (mcd) min. max. yellow cf 2.5f 4.0f df 4.0f 6.5f ef 6.5f 10.3f ff 10.3f 16.6f gf 16.6f 26.5f hf 26.5f 42.3f if 42.3f 67.7f jf 67.7f 108.2f kf 108.2f 173.2f lf 173.2f 250.0f mf 250.0f 360.0f nf 360.0f 510.0f of 510.0f 800.0f pf 800.0f 1250.0f qf 1250.0f 1800.0f rf 1800.0f 2900.0f sf 2900.0f 4700.0f tf 4700.0f 7200.0f uf 7200.0f 11700.0f vf 11700.0f 18000.0f wf 18000.0f 27000.0f yf 14800.0f 21400.0f zf 21400.0f 30900.0f
7 color categories color cat # lambda (nm) min. max. green 6 561.5 564.5 5 564.5 567.5 4 567.5 570.5 3 570.5 573.5 2 573.5 576.5 1 582.0 584.5 3 584.5 587.0 yellow 2 587.0 589.5 4 589.5 592.0 5 592.0 593.0 tolerancefforfeachfbinflimitfisf0.5fnm. mechanical option matrix mechanical option code defnition 00f bulkfpackaging,fminimumfincrementf500fpcs/bagf 01f tapef&freel,fcrimpedfleads,fminimumfincrementf1300fpcs/bagf 02f tapef&freel,fstraightfleads,fminimumfincrementf1300fpcs/bagf a1f t-1,frightfanglefhousing,funevenfleads,fminimumfincrementf500fpcs/bagf a2f t-1,frightfanglefhousing,fevenfleads,fminimumfincrementf500fpcs/bagf b1f t-1 3 / 4 fanglefhousing,funevenflead,fminimumfincrementf500fpcs/bagf b2f t-1 3 / 4 fanglefhousing,fevenfleads,fminimumfincrementf500fpcs/bagf note:fallfcategoriesfarefestablishedfforfclassifcationfoffproducts.fproductsfmayfnotfbefavailablefinfallfcategories.fpleasefcontactfyourflocalfavagof representativefforffurtherfclarifcation/information. intensity bin limit (con't) color bin intensity range (mcd) min. max. green bf 1.8f 2.9f cf 2.9f 4.7f df 4.7f 7.6f ef 7.6f 12.0f ff 12.0f 19.1f gf 19.1f 30.7f hf 30.7f 49.1f if 49.1f 78.5f jf 78.5f 125.7f kf 125.7f 201.1 lf 201.1f 289.0f mf 289.0f 417.0f nf 417.0f 680.0f of 680.0f 1100.0f pf 1100.0f 1800.0f qf 1800.0f 2700.0f rf 2700.0f 4300.0f sf 4300.0f 6800.0f tf 6800.0f 10800.0f uf 10800.0f 16000.0f vf 16000.0f 25000.0f wf 25000.0f 40000.0f zf 21400.0f 30900.0f
8 figure 9. recommended wave soldering profle. precautions lead forming ? f thefleadsfoffanfledflampfmayfbefpreformedforfcutftof lengthfpriorftofinsertionfandfsolderingfintofpcfboard. ? f iffleadfformingfisfrequiredfbeforefsoldering,fcarefmustf bef takenf tof avoidf anyf excessivef mechanicalf stressf inducedftofledfpackage.fotherwise,fcutfthefleadsfoffledf toflengthfafterfsolderingfprocessfatfroomftemperature.f thef solderf jointf formedf willf absorbf thef mechanicalf stressfoffthefleadfcuttingffromftravelingftofthefledfchipf diefattachfandfwirebond. ? f itfisfrecommendedfthatftoolingfmadeftofpreciselyfformf andfcutfthefleadsftoflengthfratherfthanfrelyfuponfhandf operation. soldering conditions ? f carefmustfbeftakenfduringfpcbfassemblyfandfsolderingf processftofpreventfdamageftofledfcomponent. ? f thef closestf ledf isf allowedf tof solderf onf boardf isf 1.59f mmf belowf thef bodyf (encapsulantf epoxy)f forf thosef partsfwithoutfstandof. ? f recommendedfsolderingfconditions:f wave soldering manual solder dipping pre-heatftemperaturef 105cfmax.f Cf pre-heatftimef 30fsecfmax.f Cf peakftemperaturef 250cfmax.f 260cfmax.f dwellftimef 3fsecfmax.f 5fsecfmax.f ? f wavefsolderingfparameterfmustfbefsetfandfmaintainedf accordingf tof recommendedf temperaturef andf dwellf timef inf thef solderf wave.f customerf isf advisedf tof periodicallyf checkf onf thef solderingf proflef tof ensuref thef solderingf proflef usedf isf alwaysf conformingf tof recommendedfsolderingfcondition. ? f iff necessary,f usef fxturef tof holdf thef ledf componentf inf properf orientationf withf respectf tof thef pcbf duringf solderingfprocess. ? f properf handlingf isf imperativef tof avoidf excessivef thermalf stressesf tof ledf componentsf whenf heated.f therefore,fthefsolderedfpcbfmustfbefallowedftofcoolftof roomftemperature,f25c,fbeforefhandling. ? f specialf attentionf mustf bef givenf tof boardf fabrication,f solderfmasking,fsurfacefplatingfandfleadfholesfsizefandf componentforientationftofassurefsolderability. ? f recommendedfpcfboardfplatedfthroughfholefsizesfforf ledfcomponentfleads: led component lead size diagonal plated through hole diameter 0.457fxf0.457fmmf (0.018fxf0.018finch)f 0.646fmmf (0.025finch)f 0.976ftof1.078fmmf (0.038ftof0.042finch)f 0.508fxf0.508fmmf (0.020fxf0.020finch)f 0.718fmmf (0.028finch)f 1.049ftof1.150fmmf (0.041ftof0.045finch)f note:f referf tof applicationf notef an1027f forf moref informationf onf solderingfledfcomponents. laminar wa ve bo tt om side of pc bo ard ho t air knife turbulent wa ve fluxing prehea t 01 02 0 30 50 100 150 200 250 30 40 50 time ? seconds tempera ture ? c 60 70 80 90 100 t op side of pc bo ard convey or speed = 1.83 m/min (6 ft/min) prehea t setting = 150 c (100c pcb) solder wa ve tempera ture = 245c air knife air tempera ture = 390c air knife dist ance = 1.91 mm (0.25 in.) air knife angle = 40 solder: sn63; flux: rma no te: allo w for bo ards to be sufficientl y cooled before exer ting mechanical force.
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005 ? 2008 avago technologies. all rights reserved. av02 ?0379en ? september 25, 2008
|
