11 octave band frequency gain noise output pwr. dc power model range gain flatness figure vswr @ 1 db comp. @ +15 v outline number (ghz) (db, min.) (db, max.) (db, max.) in/out (db m, min.) (ma, nom.) drawing the following amplifiers are available as standard designs from miteq?s js amplifier department. however, it is important to note that the vast majority of applica tions require customized performance. we, at miteq, prid e ourselves in supporting these custom engineering re quire- ments. our engineers are available to discuss not o nly the amplifier?s performance, but the effects of integra tion of these amplifiers into your specific system. notes: most octave band amplifiers are available wi th waveguide input and output interfaces (see figur e e, page 38). available waveguide sizes range from wr19 to wr137. js2-00500100-045-10a 0.5?1 35 1 0.45 2:1 10 250 c js2-00500100-055-10a 0.5?1 35 1 0.55 2:1 10 250 c js2-00500100-075-10a 0.5?1 35 1 0.75 2:1 10 250 c js2-00500100-10-10a 0.5?1 35 1.2 1 2:1 10 250 c js2-01000200-045-10a 1?2 36 1 0.45 2:1 10 250 d js2-01000200-055-10a 1?2 36 1 0.55 2:1 10 250 d js2-01000200-075-10a 1?2 36 1 0.75 2:1 10 250 d js2-01000200-10-10a 1?2 36 1.2 1 2:1 10 250 d js2-02000400-045-10a 2?4 28 1.2 0.45 2:1 10 175 c js2-02000400-055-10a 2?4 28 1.2 0.55 2:1 10 175 c js2-02000400-065-10a 2?4 28 1.2 0.65 2:1 10 175 c js2-02000400-075-10a 2?4 28 1.2 0.75 2:1 10 175 c js2-02000400-10-10a 2?4 28 1.2 1 2:1 10 175 c js2-04000800-08-0a 4?8 22 1.2 0.8 2:1 0 150 a js2-04000800-09-5a 4?8 20 1.2 0.9 2:1 5 150 a js2-04000800-12-8a 4?8 20 1.2 1.2 2:1 8 150 a js2-04000800-15-8a 4?8 20 1.2 1.5 2:1 8 150 a js3-04000800-08-10a 4?8 30 1 0.8 2:1 10 175 d js3-04000800-10-10a 4?8 30 1 1 2:1 10 175 d js3-04000800-13-10a 4?8 30 1 1.3 2:1 10 175 d js3-04000800-15-10-10a 4?8 30 1 1.5 2:1 10 175 d js2-08001200-11-10a 8?12 15 1 1.1 2:1 10 150 a js2-08001200-15-10a 8?12 15 1.2 1.5 2:1 10 150 a js2-08001200-18-10a 8?12 15 1.2 1.8 2:1 10 150 a js3-08001200-11-10a 8?12 27 1 1.1 2:1 10 175 a js3-08001200-13-10a 8?12 27 1 1.3 2:1 10 175 a js3-08001200-15-10a 8?12 27 1 1.5 2:1 10 175 a js3-12001800-16-10a 12?18 23 1 1.6 2:1 10 175 a js3-12001800-20-10a 12?18 23 1 2 2:1 10 175 a js3-12001800-25-10a 12?18 23 1 2.5 2:1 10 175 a js3-12001800-30-10a 12?18 23 1 3 2:1 10 175 a js4-12001800-12-5a 12?18 33 1 1.2 2:1 5 200 a js4-12001800-13-5a 12?18 33 1 1.3 2:1 5 200 a js4-12001800-155-10a 12?18 33 1 1.55 2:1 10 200 a js4-12001800-18-10a 12?18 33 1 1.8 2:1 10 200 a js4-12001800-30-18-10a 12?18 33 1 3 2:1 10 200 a js2-01000200-045-10a
12 octave band (cont.) notes: most octave band amplifiers are available wi th waveguide input and output interfaces (see figur e e, page 38). available waveguide sizes range from wr19 to wr137. (1) requires 8 vdc. js2-18002600-20-5a 18?26 14 1 2 2:1 5 100 a js2-18002600-25-5a 18?26 14 1 2.5 2:1 5 100 a js2-18002600-30-5a 18?26 14 1 3 2:1 5 100 a js3-18002600-21-8a 18?26 24 1 2.1 2:1 8 175 a js3-18002600-25-8a 18?26 24 1 2.5 2:1 8 175 a js3-18002600-30-8a 18?26 24 1 3 2:1 8 175 a js4-18002600-18-8a 18?26 35 1 1.8 2:1 8 200 a js4-18002600-21-8a 18?26 35 1 2.1 2:1 8 200 a js4-18002600-26-10a 18?26 35 1 2.6 2:1 10 200 a js2-26004000-35-5a 26?40 10 2 3.5 2.5:1 5 100 a js2-26004000-40-5a 26?40 10 2 4 2.5:1 5 100 a js2-26004000-45-5a 26?40 10 2 4.5 2.5:1 5 100 a js2-26004000-100-20a 26?40 10 2.5 10 2.5:1 20 600,100 (1) a js3-26004000-35-5a 26?40 18 2.5 3.5 2.5:1 8 175 a js3-26004000-40-5a 26?40 18 2.5 4 2.5:1 8 175 a js3-26004000-45-5a 26?40 18 2.5 4.5 2.5:1 8 175 a js4-26004000-27-8a 26?40 26 2.5 2.7 2:1 8 200 a js4-26004000-30-8a 26?40 25 2.5 3 2:1 8 200 a js4-26004000-35-8a 26?40 23 2.5 3.5 2:1 8 200 a js4-26004000-40-8a 26?40 23 2.5 4 2:1 8 200 a js4-40006000-60-0p 40?60 15 1.5 6 2.75:1 0 175 a js4-40006000-65-0p 40?60 15 1.5 6.5 2.75:1 0 175 a js4-40006000-70-0a 40?60 15 1.5 7 2.75:1 0 175 a js4-40006000-75-0a 40?60 15 1.5 7.5 2.75:1 0 175 a js4-40006000-80-0p 40?60 15 1.5 8.5 2.75:1 0 175 a frequency gain noise output pwr. dc power model range gain flatness figure vswr @ 1 db comp. @ +15 v outline number (ghz) (db, min.) (db, max.) (db, max.) in/out (db m, min.) (ma, nom.) drawing jsw4-08001200-12-0a jsw4-26004000-30-8a
13 multioctave band frequency gain noise output pwr. dc power model range gain flatness figure vswr @ 1 db comp. @ +15 v outline number (ghz) (db, min.) (db, max.) (db, max.) in/out (db m, min.) (ma, nom.) drawing js2-00500200-05-10a 0.5?2 32 1 0.5 2:1 10 250 c js2-00500200-07-10a 0.5?2 32 1 0.7 2:1 10 295 c js2-00500200-08-10a 0.5?2 32 1 0.8 2:1 10 295 c js2-00500200-10-10a 0.5?2 32 1 1 2:1 10 295 c js2-00500200-15-10a 0.5?2 32 1 1.5 2:1 10 295 c js2-01000400-08-10a 1?4 27 1 0.8 2:1 10 200 c js2-01000400-09-10a 1?4 27 1 0.9 2:1 10 200 c js2-01000400-11-10a 1?4 27 1 1.1 2:1 10 200 c js2-01000400-20-10a 1?4 27 1 2 2:1 10 200 c js2-02000600-08-0a 2?6 22 1 0.8 2:1 0 125 a js2-02000600-09-0a 2?6 22 1 0.9 2:1 0 125 a js2-02000600-12-10a 2?6 20 1.5 1.2 2:1 10 175 a JS2-02000600-20-10A 2?6 20 1.5 2 2:1 10 175 a js2-02000800-08-0a 2?8 22 1.25 0.8 2:1 0 125 a js2-02000800-10-0a 2?8 20 1.25 1 2:1 0 125 a js2-02000800-12-10a 2?8 18 1.25 1.2 2:1 10 175 a js2-02000800-20-10a 2?8 18 1.25 2 2:1 10 175 a js3-02001800-23-5a 2?18 23 1.8 2.3 2.5:1 5 150 a js3-02001800-25-5a 2?18 23 1.8 2.5 2.5:1 5 150 a js3-02001800-30-5a 2?18 23 1.8 3 2.5:1 5 150 a js3-02001800-35-5a 2?18 23 1.8 3.5 2.5:1 5 150 a js3-02001800-50-5a 2?18 23 1.8 5 2.5:1 5 150 a js4-02001800-22-5a 2?18 30 2 2.2 2.5:1 5 200 b js4-02001800-24-5a 2?18 30 2 2.4 2.5:1 5 200 a js4-02001800-27-5a 2?18 30 2 2.7 2.5:1 5 200 a js4-02001800-32-5a 2?18 30 2 3.2 2.5:1 5 200 a js4-02001800-50-5a 2?18 30 2 5 2.5:1 5 200 a js3-02002600-33-5a 2?26 21 2.5 3.3 2.5:1 5 150 a js3-02002600-35-5a 2?26 21 2.5 3.5 2.5:1 5 150 a js3-02002600-40-5a 2?26 21 2.5 4 2.5:1 5 150 a js3-06001800-16-10a 6?18 26 1.8 1.6 2:1 10 175 a js3-06001800-21-10a 6?18 26 1.8 2.1 2:1 10 175 a js3-06001800-25-10a 6?18 26 1.8 2.5 2:1 10 175 a js3-06001800-30-10a 6?18 26 1.8 3 2:1 10 175 a js4-06001800-145-10a 6?18 34 2 1.45 2:1 10 200 a js4-06001800-16-10a 6?18 34 2 1.6 2:1 10 200 a js4-06001800-20-10a 6?18 34 2 2 2:1 10 200 a js4-06001800-25-10a 6?18 34 2 2.5 2:1 10 200 a js4-06001800-30-10a 6?18 34 2 3 2:1 10 200 a js4-26004000-25-5a js4-18004000-30-5a
14 multioctave band (cont.) js3-08001800-16-5a 8?18 24 1.5 1.6 2:1 5 150 a js3-08001800-20-5a 8?18 24 1.5 2 2:1 5 150 a js3-08001800-25-10a 8?18 24 1.5 2.5 2:1 10 150 a js3-08001800-30-10a 8?18 24 1.5 3 2:1 10 150 a js4-08001800-145-5a 8?18 32 2 1.45 2:1 5 200 a js4-08001800-17-5a 8?18 32 2 1.7 2:1 5 200 a js4-08001800-20-10a 8?18 32 2 2 2:1 10 200 a js4-08001800-25-10a 8?18 32 2 2.5 2:1 10 200 a js4-08001800-30-10a 8?18 32 2 3 2:1 10 200 a js3-12002600-25-8a 12?26 24 2.5 2.5 2.2:1 8 150 a js3-12002600-30-8a 12?26 24 2.5 3 2.2:1 8 150 a js3-12002600-35-8a 12?26 24 2.5 3.5 2.2:1 8 150 a js4-12002600-22-8a 12?26 33 2.2 2.2 2:1 8 200 a js4-12002600-30-8a 12?26 33 2.2 3 2:1 8 200 a js4-12002600-35-8a 12?26 33 2.2 3.5 2:1 8 200 a js3-18004000-38-8a 18?40 16 2.5 3.8 2.5:1 8 150 a js3-18004000-42-8a 18?40 16 2.5 4.2 2.5:1 8 150 a js3-18004000-50-8a 18?40 16 2.5 5 2.5:1 8 150 a js4-18004000-30-5a 18?40 23 2.5 3 2.5:1 5 200 a js4-18004000-33-5a 18?40 23 2.5 3.3 2.5:1 5 200 a js4-18004000-35-8a 18?40 23 2.5 3.5 2.5:1 8 200 a js4-18004000-40-8a 18?40 23 2.5 4 2.5:1 8 200 a js4-18004000-50-8a 18?40 23 2.5 5 2.5:1 8 200 a frequency gain noise output pwr. dc power model range gain flatness figure vswr @ 1 db comp. @ +15 v outline number (ghz) (db, min.) (db, max.) (db, max.) in/out (db m, min.) (ma, nom.) drawing
15 ultra-wideband frequency gain noise output pwr. dc power model range gain flatness figure vswr @ 1 db comp. @ +15 v outline number (ghz) (db, min.) (db, max.) (db, max.) in/out (db m, min.) (ma, nom.) drawing js2-00100200-07-10a 0.1?2 36 1 0.7 (2) 2:1 10 325 d js2-00100200-09-10a 0.1?2 36 1 0.9 (2) 2:1 10 325 d js2-00100200-11-10a 0.1?2 36 1 1.1 (2) 2:1 10 325 d js2-00100200-15-10a 0.1?2 36 1 1.5 (2) 2:1 10 325 d js2-00100400-08-10a 0.1?4 27 1 0.8 (2) 2:1 10 200 c js2-00100400-10-10a 0.1?4 27 1 1 (2) 2:1 10 200 c js2-00100400-12-10a 0.1?4 27 1 1.2 (2) 2:1 10 200 c js2-00100600-10-3a 0.1?6 23 1.5 1 (3) 2:1 3 175 a js2-00100600-12-3a 0.1?6 23 1.5 1.2 (3) 2:1 3 175 a js2-00100600-14-8a 0.1?6 21 1.5 1.4 (3) 2:1 8 175 a js2-00100600-20-8a 0.1?6 21 1.5 2 (3) 2:1 8 175 a js2-00100800-13-0a 0.1?8 20 1.5 1.3 (3) 2:1 0 175 a js2-00100800-15-0a 0.1?8 20 1.5 1.5 (3) 2:1 0 175 a js2-00100800-17-8a 0.1?8 20 1.5 1.7 (3) 2:1 8 175 a js2-00100800-25-8a 0.1?8 20 1.5 2.5 (3) 2:1 8 175 a js3-00101000-20-5a 0.1?10 23 1.5 2 (4) 2.5:1/2.2:1 5 150 b js3-00101000-22-5a 0.1?10 23 1.5 2.2 (4) 2.5:1/2.2:1 5 150 a js3-00101000-25-5a 0.1?10 23 1.5 2.5 (4) 2.5:1/2.2:1 5 150 a js3-00101000-35-5a 0.1?10 23 1.5 3.5 (4) 2.5:1/2.2:1 5 150 a js3-00101200-21-5a 0.1?12 23 1.5 2.1 (4) 2.5:1/2.2:1 5 150 b js3-00101200-23-5a 0.1?12 23 1.5 2.3 (4) 2.5:1/2.2:1 5 150 a js3-00101200-27-5a 0.1?12 23 1.5 2.7 (4) 2.5:1/2.2:1 5 150 a js3-00101200-35-5a 0.1?12 23 1.5 3.5 (4) 2.5:1/2.2:1 5 150 a js3-00101800-24-5a 0.1?18 23 1.8 2.4 (4) 2.5:1/2.2:1 5 150 b js3-00101800-33-5a 0.1?18 23 1.8 3.3 (4) 2.5:1/2.2:1 5 150 a js3-00101800-40-5a 0.1?18 23 1.8 4 (4) 2.5:1/2.2:1 5 150 a js4-00101800-23-5a 0.1?18 29 1.8 2.3 (4) 2.5:1/2.2:1 5 200 b js4-00101800-28-5a 0.1?18 29 1.8 2.8 (4) 2.5:1/2.2:1 5 200 a js4-00101800-33-5a 0.1?18 29 1.8 3.3 (4) 2.5:1/2.2:1 5 200 a js4-00101800-40-5a 0.1?18 29 1.8 4 (4) 2.5:1/2.2:1 5 200 a js4-00102000-25-5a 0.1?20 28 1.8 2.5 (4) 2.5:1 5 200 b js4-00102000-30-5a 0.1?20 28 1.8 3 (4) 2.5:1 5 200 a js4-00102000-35-5a 0.1?20 28 1.8 3.5 (4) 2.5:1 5 200 a js3-00102600-33-5a 0.1?26 20 2.5 3.3 (4) 2.5:1 5 150 a js3-00102600-37-5a 0.1?26 20 2.5 3.7 (4) 2.5:1 5 150 a js3-00102600-42-5a 0.1?26 20 2.5 4.2 (4) 2.5:1 5 150 a js4-00102600-28-5a 0.1?26 27 2.5 2.8 (4) 2.5:1 5 200 b js4-00102600-30-5a 0.1?26 27 2.5 3 (4) 2.5:1 5 200 b js4-00102600-32-5a 0.1?26 27 2.5 3.2 (4) 2.5:1 5 200 b js4-00102600-35-5a 0.1?26 27 2.5 3.5 (4) 2.5:1 5 200 a js4-00102600-50-5a 0.1?26 27 2.5 5 (4) 2.5:1 5 200 a js4-00104000-65-5a 0.1?40 14 4.5 6.5 (4) 2.75:1 5 200 b js4-00104000-75-5a 0.1?40 14 4.5 7.5 (4) 2.75:1 5 200 b js4-00104000-85-5a 0.1?40 14 4.5 8.5 (4) 2.75:1 5 200 b notes: (2) noise figure is higher below 250 mhz. (3) noise figure is higher below 500 mhz. (4) noise figure is higher below 800 mhz.
37 outline drawings input field replaceable sma k or v type connector .74 [18.80] .061 [1.549] .279 [7.087] .431 [10.947] .079 [2.007] dia. mounting hole (typ. 4 places) .25 [6.35] .148 [3.759] .38 [9.65] typ. .613 [15.570] .369 [9.373] .200 [5.080] .350 [8.890] max. +vdc connector mount miteq p/n 128814 r f o u t p u t rf input rf output rf input 36 [9.14] .05 [1.27] .53 [13.46] .98 [24.89] .25 [6.35] typ. .29 [7.37] .21 [5.33] .56 [14.28] .08 [2.03] .21 [5.33] .055 [1.39] .086 [2.18] dia. thru. (typ. 2 mounting holes) .15 [3.81] dc power mounting surface k style connector (typ. 2 places) figure a (jsd package) figure b (js4 package) * available as a hermetically sealed package note: dimensions shown in brackets [ ] are in mill imeters. .29 [7.49] .185 [4.69] .350 [8.89] .600 [15.24] .04 [1.02] .38 [9.65] typ. rf output .380 [9.65] clearance for #2-56 cap head screw (typ. 2 places) .22 [5.59] .70 [17.78] rf input .830 [21.08] gnd vdc .2 [5.1] .38 [9.65] .18 [4.57] figure c (jss package) * available as a hermetically sealed package
38 outline drawings (cont.) .031 [.79] dia. .175 [4.445] .001 mounting surface to mounting surface from bottom of pin .10 [2.54] dia. thru (typ. 5 places) .82 [20.83] .82 [20.83] .98 [24.89] .38 [9.65] a .18 [4.57] .70 [17.78] a .08 [2.03] .08 [2.03] .27 [6.86] r f i n p u t r f o u t p u t ground rf output v d c .43 [10.92] mounting surface .19 [4.83] .58 [14.73] .20 [5.08] .05 [1.27] .29 [7.37] .48 [12.45] .08 [2.03] .38 [9.65] typ. figure d (jsm package) ground 1.050 [26.67] .13 [3.30] 1.61 [40.78] 2.09 [53.09] rf output 1.16 [29.46] ref rf input .59 [14.99] .29 [7.37] .65 [16.51] mounting surface .13 [3.30] conforms to wr19 cover flange typ. both ends dc power 1.363 [34.62] .13 [3.30] .681 [17.30] 1.30 [33.02] 0.15 x 6 [3.81] type k female connector .05 [1.27] .25 [6.29] .100 dia. thru mounting hole (typ. 4 places) rf input .814 [20.68] 1.04 [26.52] .115 [2.92] .125 [3.18] .98 [24.89] +vdc .730 [18.54] typ. .25 [6.38] rf output .15 [3.92] .43 [10.92] .68 [17.27] .49 [12.45] .23 [5.84] .18 [4.57] .35 [8.89] .55 [14.07] .81 [20.68] ground figure e (typical amplifier with wr19 waveguide interface) figure f (jsh4 package) * available as a hermetically sealed package note: dimensions shown in brackets [ ] are in mill imeters.
39 outline drawings (cont.) .02 [.51] .20 [5.08] .83 [21.08] 1.38 [35.05] .81 [20.57] .33 [8.38] .23 [5.84] .11 [2.79] rf input section a-a .42 [10.67] .44 [11.18] .18 [4.57] .34 [8.64] .29 [7.37] 2.38 [60.45] a a .16 [4.06] x4 .18 [.57] vdc ground .21 [5.33] .88 sq. typ. [22.35] x2 .19 [4.83] rf output conforms to wrd180 double ridge wave- guide cover flange at input and output 1.44 [36.58] 2.25 [57.15] 1.94 [49.28] .94 [23.88] .87 [22.10] .18 [4.57] .98 [24.89] wrd180 (input and output interface) ultra-low noise x-band satcom lna note: dimensions shown in brackets [ ] are in mill imeters. a a .750 [19.05] .322 [8.18] 4.395 [111.63] .245 [6.22] 8-32 tap x .20 [5.08] deep typ. 4 mounting holes marked 'a' 2.200 [55.88] b b b b .250 [6.35] 6.700 [170.18] 7.20 [182.88] 7.97 [202.44] .60 [15.24] 8-32 x .30 [7.62] deep typ. 4 mounting holes marked 'b' far side .25 [6.35] 3.700 [93.98] 1.30 [33.02] 4.20 [106.68] type 'n' female connector (output) 1.50 sq. [38.10] .90 [22.86] .25 [6.35] .32 [8.12] 2.450 [62.23] aa power j1 power connector p/n pt02e-10-6p .75 [19.05] 3.13 [79.50] 1.81 [45.97] .905 [22.98] .26 [6.60] rf output 5.12 [130.05] conforms to wr137 cover flange
40 tel: (631) 439-9474 fax: (631) 435-7470 date e-mail: acollins@miteq.com js department company contact tel. fax e-mail address 100 davids drive, hauppauge, ny 11788 tel.: (631) 439-9474 ? fax: (631) 435-7470/436-7430 www.miteq.com amplifiers mixers multipliers frequency sources passive power components if signal processing components integrated assemblies fiber optic products satcom products please send additional information on the following miteq products: other special requirements options connectors: sma (standard), k connectors, v connector s, waveguide and pins. screening: commercial (standard), mil-std-833, mil- std-38534, mil-std-810, etc. special testing: shock, random vibration, thermal c ycling, burn-in, etc. for additional information please complete and fax this form to [631] 435-7470, or call ann collins at [631] 439-9474 specification parameter application #1 application #2 frequency gain (db, minimum) gain flatness (db) gain vs. temperature noise figure @ temperature (db, maximum) operating temperature range input vswr (maximum) output vswr (maximum) output power @ 1 db compression (dbm, minimum) output third order ip 3 (dbm, minimum) dc supply voltage, current connectors (input/output) size requirement, l/w/h other (specify) need date quantity
|
