325 mhz saw filter 12 mhz bandwidth part number: SF0325BA02633S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0325BA02633S rev a 19-mar-2010 ecn 36650 page 1 of 3 description ? miniature 325 mhz saw filter with a 12 mhz typical 3db bandwidth. ? 5 x 7 mm lcc package. ? rohs compliant typical performance
325 mhz saw filter 12 mhz bandwidth part number: SF0325BA02633S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0325BA02633S rev a 19-mar-2010 ecn 36650 page 2 of 3 specification parameter min typ max units center frequency f c - 325 - mhz minimum insertion loss (il) - 12.8 14 db 1 db bandwidth 9 10.6 - mhz 3 db bandwidth 10 12.4 - mhz 40 db bandwidth - 18.8 35.5 mhz amplitude ripple (320.75 to 329.25 mhz) - 0.6 1 db p-p phase linearity (320.75 to 329.25 mhz) - 5 - deg p-p group delay ripple (320.75 to 329.25 mhz) - 35 75 ns p-p attenuation (reference level from minimum insertion loss (il)) 10 to 220 mhz 50 64 - db 220 to 300 mhz 40 47 - db 350 to 355 mhz 40 50 - db 355 to 375 mhz 35 51 - db 375 to 380 mhz 40 51 - db 380 to 405 mhz 35 52 - db 405 to 500 mhz 40 53 - db input / output return loss 10 12 - db source and load impedance - 50 - ? ambient temperature - 25 - oc maximum ratings parameter min max units storage temperature range -40 +85 oc operating temperature range -40 +85 oc input power level - 10 dbm matching circuit zin = zout =50 ohm, single ended l1=10 nh l2=12 nh l3=10 nh l4=15 nh
325 mhz saw filter 12 mhz bandwidth part number: SF0325BA02633S spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0325BA02633S rev a 19-mar-2010 ecn 36650 page 3 of 3 package outline & marking suggested footprint all specifications are believed to be accurate and reliable. howe ver, spectrum microwave reserves the right to make changes wit hout notice. ? 2010 all rights reserved. date code (year, day) package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 m min, over a 1.3-8.9 m ni plating iso 9001 registered units: mm tolerances are typically 0.15 mm except where indicated. pad configuration: input: j output: d ground: all other pads smi 2633s yyddd
|