THCV233_rev.1.00_e_brief copyright?2012 thine electronics, inc. thine electronics, inc. 1/2 THCV233 v-by-one? hs high-speed video data transmitter with bi-directional transceiver general description THCV233 is v-by-one? hs high-speed video data transmitter with bi-directional transceiver. it convey not only video data (main-link), but also bi-directional system control data (sub-link) that is driven by 2-wire serial interface. host cpu-side of sub-link is selectable on each device and the other side of sub-link integrates i/o expander. THCV233-234 system is able to watch and control peripheral devices via 2-wi re serial interface or gpios. they also can report interrupt events caused by change of gpio inputs and internal statuses. width link lvds clock freq. 24bit si/so, si/ddo 20mhz to 100mhz si/do 40mhz to 100mhz 32bit si/so, si/ddo 20mhz to 85mhz si/do 40mhz to 85mhz si/so:single-in/single-out, si/do:single-in/dual-out si/ddo:single-in/distributed dual-out di/so:dual-in/single-out, di/sso:dual-in/selected single-out features ? lvds input internal termination ? core 1.8v, lvds 3.3v ? package: 48 pin qfn ? main-link ? data width selectable: 24/32 bit ? single/dual link selectable ? ac coupling ? wide frequency range ? cdr requires no extern al freq. reference ? supports spread spectrum clocking: up to 30khz/ 0.5%(center spread) ? sub-link ? driven by 2-wire serial i/f (max. 400kbps) ? gpio expander : 4pins block diagram
THCV233_rev.1.00_e_brief copyright?2012 thine electronics, inc. thine electronics, inc. 2/2 example system diagram rla+/- rlb+/- rlc+/- rle+/- rlclk+/- rx0p rx0n thcv234 rld+/- tla+/- tlb+/- tlc+/- tle+/- tlclk+/- tx0p tx0n THCV233 tld+/- rcmp rcmn tcmp tcmn sda scl sda scl mcu mcu example for lvds to lvds with bi-directional transceiver timing controller display application processor example for lvds to cmos/ttl notices and requests 1. the product specifications described in this material are subject to change without prior notice. 2. the circuit diagrams described in this material are examples of the application which may not always apply to the customer?s design. we are not responsible for possible errors and omissions in this material. please note if errors or omissions should be found in this material, we may not be able to correct them immediately. 3. this material contains our copy right, know-how or ot her proprietary. copying or disclosing to third parties the contents of this material without our prior permission is prohibited. 4. note that if infringement of any third party's industrial ownership should occur by using this product, we will be exempted from the responsibility unless it directly relates to the production process or functions of the product. 5. this product is presumed to be used for general elec tric equipment, not for the applications which require very high reliability (including medical equipment directly concerning people's life, aerospace equipment, or nuclear control equipment). also, when using this product for the equipment concerned with the control and safety of the transportation means, the traffic signal equipment, or various types of safety equipment, please do it after applying appropriat e measures to the product. 6. despite our utmost efforts to improve the quality and reliability of the product, faults will occur with a certain small probability, which is inevitable to a semi -conductor product. therefor e, you are encouraged to have sufficiently redundant or error preventive design applied to the use of the product so as not to have our product cause any social or public damage. 7. please note that this product is not designed to be radiation-proof. 8. customers are asked, if required, to judge by themselves if this product falls under the category of strategic goods under the foreign exchange and foreign trade control law. thine electronics, inc. sales@thine.co.jp
|
