ims-5 v ishay dale document number 34048 revision 18-oct-04 www.vishay.com 24 for technical questions, contact magnetics@vishay .com inductors military, mil-prf-15305 qualified, type lt and commercial, molded, shielded features ? wide inductance range in small package. ? flame retardant coating. ? electromagnetic shield-finest shield available. ? epoxy molded construction provides superior moisture protection. ? precision performance, excellent reliability, sturdy construction. note: listing of military standard does not imply qualification. contact factory for latest government qpl information. *measured with full length lead. ** rated dc current: based on maximum temperature rise not to exceed 15 c at + 90 c ambient. *** incremental current: the minimum typical current at which the inductance will be decreased by 5% from its initial zero dc value. *not qpl'd. electrical specifications inductance tolerance: 10% standard. 5% available. insulation resistance: 1000 megohm minimum per mil-std-202, method 302, test condition b. dielectric withstanding voltage: 1000 vac per mil-std-202, method 301 (sea level). percent coupling : 3% maximum per mil-prf-15305. operating temperature range: - 55 c to + 105 c. inductance range and military standard from to grade class core shield military standard material classification inductance range .10 h 1.0 h 15.0 h .82 h 12.0 h 100,000 h 1 1 1 a a a phenolic powd. iron ferrite powd. iron powd. iron ferrite ms75087 ms75088 ms75089 * specifications mil-std-202, method 105 mil-std-202, method 107 mil-std-202, method 111 mil-prf-15305 mil-prf-15305 mil-std-202, method 210 mil-std-202, method 215 dimensions in inches [millimeters] 0.025 0.002 [0.635 0.051] 0.162 0.010 [4.11 .254] 0.410 0.020 [10.41 0.508] 1.44 0.188 [36.57 4.78] environmental performance test barometric pressure thermal shock flammability overload low temperature storage resistance to soldering heat resistance to solvents conditions test condition c test condition a-1 ? ? ? test condition a ? ind. ( h) tol. ms75087 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 ms75088 -1 -2 military type lt10k 191 192 193 194 195 196 197 198 199 200 201 202 lt10k 203 204 incremental*** current (ma) rated dc ** current (ma) dcr @ 25 c max. (ohms) self-resonant * freq. min. (mhz) test freq. l & q (mhz) q min. 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 50 51 51 50 49 47 46 44 44 43 42 40 44 44 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 7.9 250.0 250.0 250.0 250.0 250.0 250.0 250.0 250.0 235.0 210.0 190.0 180.0 140.0 130.0 0.025 0.034 0.037 0.047 0.067 0.11 0.13 0.18 0.25 0.33 0.45 0.59 0.07 0.10 1790 1530 1470 1300 1100 855 780 670 565 490 420 370 1070 895 ? ? ? ? ? ? ? ? ? ? ? ? ? ? standard electrical specifications military standard material specifications encapsulant: epoxy. standard terminal: #22 awg tinned copper. mechanical specifications t erminal strength: 5 pounds pull per mil-std-202, method 211, test condition a. w eight: ims-5 = 0.85 grams maximum.
document number 34048 revision 18-oct-04 www.vishay.com 25 ims-5 v ishay dale for technical questions, contact magnetics@vishay .com note: listing of military standard does not imply qualification. contact factory for latest government qpl information. ordering information - military part number ms75088 military standard 215 id number -13 inductance value or lt type 10 grade and class k family ordering information 10 h inductance value 10% inductance tolerance ims-5 model standard electrical specifications *measured with full length lead. ** rated dc current: based on maximum temperature rise not to exceed 15 c at + 90 c ambient. *** incremental current: the minimum typical current at which the inductance will be decreased by 5% from its initial zero dc value. ind. ( h) tol. military standard military type q min. test freq. l & q (mhz) self-resonant * freq. min. (mhz) dcr @ 25 c max. (ohms) rated dc ** current (ma) incremental*** current (ma) -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 ms75089 (not qpl'd) -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 ms75089 (not qpl'd) -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 390.0 470.0 560.0 680.0 820.0 1000.0 1200.0 1500.0 1800.0 2200.0 2700.0 3300.0 3900.0 4700.0 5600.0 6800.0 8200.0 10000.0 12000.0 15000.0 18000.0 22000.0 27000.0 33000.0 39000.0 47000.0 56000.0 68000.0 82000.0 100000.0 205 206 207 208 209 210 211 212 213 214 215 216 lt10k 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 lt10k 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 44 44 44 44 44 44 44 44 50 50 50 55 45 45 45 45 45 50 50 50 50 50 50 55 55 55 55 55 55 60 60 60 60 60 60 45 45 45 45 45 45 45 45 44 40 40 40 30 30 30 27 27 27 27 23 23 23 21 18 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.079 0.079 0.079 0.079 0.079 0.079 0.079 0.079 0.079 0.079 0.079 0.079 115.0 105.0 100.0 92.0 85.0 75.0 70.0 65.0 55.0 50.0 46.0 44.0 49.0 45.0 41.0 38.0 34.0 29.0 27.0 25.0 21.0 10.5 10.0 9.7 8.5 8.0 7.5 7.0 6.5 6.2 5.7 4.7 4.5 4.2 3.8 1.5 1.2 1.0 0.97 0.92 0.84 0.80 0.74 0.73 0.66 0.54 0.47 0.33 0.29 0.28 0.25 0.21 0.19 0.17 0.16 0.14 0.13 0.12 0.11 0.12 0.14 0.19 0.28 0.35 0.40 0.55 0.72 1.02 1.32 1.62 2.0 0.80 0.89 0.96 1.19 1.37 1.93 2.11 2.23 2.70 2.44 3.12 3.6 4.1 4.4 5.0 5.8 6.4 7.4 9.5 10.5 11.8 13.0 17.5 22.1 26.5 29.9 33.8 47.3 53.0 73.8 81.6 98.9 111.0 119.0 137.0 143.0 157.0 175.0 274.0 308.0 343.0 376.0 473.0 512.0 580.0 618.0 678.0 815 775 650 535 480 450 380 335 280 250 220 200 315 300 290 260 240 205 195 190 170 180 160 150 140 135 125 115 110 105 92 90 80 80 70 60 55 50 50 40 40 35 31 28 27 26 24 23 22 21 17 16 15 15 13 13 12 11 11 ? ? ? ? ? ? ? ? ? ? ? ? 250.0 235.0 220.0 200.0 190.0 180.0 175.0 160.0 150.0 140.0 120.0 95.0 90.0 85.0 80.0 70.0 65.0 60.0 58.0 55.0 50.0 45.0 40.0 35.0 33.0 30.0 27.0 25.0 22.0 20.0 19.0 17.0 16.0 15.0 14.0 13.0 12.0 10.0 9.0 8.0 7.5 6.0 5.5 5.0 4.0 3.5 3.0 inductors , military, mil-prf-15305 qualified, t ype lt and commercial, molded, shielded
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
