i deal for surface mounting small amounts of electrical wiring or communication cables. these rugged raceways offer a low profile appearance which blend with any decor. v500, v700, and 700wh come in our exclusive scuffcoat ?ish. v500 / v700 / 700wh steel raceway one-piece surface steel raceway features & bene?s low-pro?e, unobtrusive appearance. blends with any decor or setting. excellent for low-voltage wiring. scuffcoat ?ish. tough, durable, scratch-resistant ?ish which can be overpainted with latex paint. surface mounting. eliminates disturbing the building structure or wall ?ish to make renovations easy. v5748-3device box accommodates wireless. designed for use with ortronics wi-jack wireless access points. full line of ?tings. provides unlimited wiring solutions and interconnection between raceway systems. more choice of colors. 700 series raceway and fittings are available in ivory and white. fittings have removable covers. allows easy access to wiring for changes and additions. raceway cutters with replaceable blades. cuts raceway cleanly, reduces labor, and installation time. datacom connectivity options. accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use. ul5 and ada compliant. raceway and ?tings meet ul5 speci?ations and can be installed in conformance with ada requirements. v500 and v700. 5700 series boxes with pass & seymour activate inserts. ed532r13 ? updated april 2005 ? for latest specs visit www.wiremold.com
2 catalog no./item description/speci?ations v506 connection cover ?to cover V706 openings where lengths of v500 706 wh or 700 series, not squarely cut, come together. v511 90 flat elbow ?for right angle v711 turns on same surface. 711wh v512 45 flat elbow ?for diagonal 45 v712 turns on same surface. v517 internal elbow ?for inside v717 surfaces at right angles. 717wh catalog no./item description/speci?ations v500 raceway ?.040" [1.0mm] steel. comes in 10 ft. [3.05mm] lengths, one 5701 coupling furnished with each length. five ft. [1.525m] lengths available, order v500-5. v700 raceway ? 040" [1.0mm] steel. 700 wh comes in 10 ft. [3.05mm] lengths, one 5701 coupling furnished with each length. five ft. [1.525m] lengths available, order v700-5. 502 bushing ?protects wires from 702 abrasion. bushing slips into open end of raceway where it enters a ?ting. v504 mounting strap (1- or 2-hole) ? v704 convert to one-hole by breaking off 704wh at score. lanced tab holds strap in place while fastening to surface. v500, v700, & 700wh raceway & fittings 1 1/4" [32mm] 3/4" [19.1mm] a b 3/4" [19.1mm] 2" [51mm] cat. # a b v504 1 7/8" [47mm] 1/2" [12.7mm] v704 1 7/8" [47mm] 5/8" [15.4mm] 2 3/4" [70mm] note: use #6 ?t head screws with all ?tings requiring screws except v504/v704, and v57200 series; with v504/v704 use #8 pan head sc rews; with v57200 series use #8 ?t head screws. 3/4" [19.1mm] 17/32" [13.5mm] 3/4" [19.1mm] 21/32" [16.7mm] a 5781a 3/4" [19.1mm] box connector b ? v5786 adjustable offset connector c ? v57240 single pole switch and box d ? v57243g duplex receptacle and box e v711 flat elbow f ?v5785 combination connector g ? v5738 fixture box solid base h v5715 tee fitting i v5703 supporting clip j ? 5747-2 shallow device box k ?V706 cover clip l ?v704 mounting strap m v57242 utility box n v717 internal elbow o v5734a utility box p ? v5739 fixture box solid base q v5719 corner box r ? r5752 alarm device box s ?v718 external elbow t ? r5753 extra deep alarm device box u ? v5747s shallow device box v ? v5744 extra deep device box w ?v5748-2 device box x ?v5748-3 device box y ? 5782 1/2" [12.7mm] conduit connector z ?v2089e reducing fitting aa ? plugmold multioutlet system e f g h i i e q firehorn box t y x s w v u l o p m l k j z panel box aa d c b a 4 11/16" [119mm] utility box v500 & 700 series system product applications
3 catalog no./item description/speci?ations v5719 corner box ?allows ample splice room. each leg of base has 1/2" trade size ko. 5780 special nipple (galvanized) ?has female 3/8" [9.5mm] pipe thread inside and male 1/2" [12.7mm] pipe thread outside. for hanging 3/8" [9.5mm] or 1/2" [12.7mm] ?tures to wiremold ?tings with 1/2" trade size kos. 5781 box connector (galvanized) 5781a for connecting raceway to conduit boxes, panel boxes, etc., having a ko for conduit. may also be used with conduit type ?tings. break out crescent twistout to use with v700. 5782a conduit connector (galvanized) ? for connecting raceway to conduit. break out crescent twistout to use with v700. v5783 elbow box connector ?for connecting raceway at right angles to conduit boxes, panel boxes, etc., having a ko for 1/2" [12.7mm] conduit. break out crescent twistout in cover to use with v700. v5784 elbow conduit connector ?for connecting raceway at right angles to 1/2" [12.7mm] conduit or armored cable connectors. break out crescent twistout in cover to use with v700. v5785 combination connector ?for 5785 wh connecting raceway, without offsetting, to any 3 1/4" [83mm] or 4" [102mm] outlet box mounted on the surface with a ko for 1/2" [12.7mm] conduit. the base end and bottom has two 1/2" trade size kos. break off cover extension to use with 700 series. spring steel bushing included for end connection to box, eliminating conduit nipple and lo cknut. 5 1/2" [140mm] 1 5/16" [33mm] 1 3/16" [30mm] 1 3/16" [30mm] 2 1/2" [64mm] 2 1/8" [54mm] 2 1/2" [64mm] with 1/2" [12.7mm] locknut 1/2" [12.7mm] 1/2" [12.7mm] 3/4" [19.1mm] 1/2" [12.7mm] male (5782) 3/4" [19.1mm] male (5782a) 1/2" [12.7mm] male (5781) 3/4" [19.1mm] male (5781a) 3/4" [19.1mm] 1 3/4" [44mm] 1/2" [12.7mm] female 1/2" [12.7mm] male 2 1/8" [54mm] 3" [76mm] 1 5/16" [33mm] 1 3/8" [33mm] 2 1/8" [54mm] 1 1/4" [32mm] 1 1/4" [32mm] catalog no./item description/speci?ations v518 external elbow ?for outside v718 surfaces at right angles. 718 wh v5700f flexible section ?for getting around dif?ult angles. end ?tings and bulk conduit lengths available. maximum painted length 3' [915mm] longer lengths furnished unpainted, consult factory for availability. 5701 coupling ?for joining and supporting lengths of v500 or 700 series raceway. one coupling supplied with each length. v5703 supporting clip ?for supporting lengths of v500 or 700 series raceway at any point desired. 5709 ground clamp ?provides additional grounding or to ground remotely located devices. attach ground wire to screw as required by nec. insert into v500 or 700 series raceway before installing. v5711lh a internal twisted elbows ?for 90 v5711rha twist with 90 turn including a ?t 5711lhawh run on sidewall to a ?t run on 5711rhawh ceiling or on door edge or window trim. break out crescent twistout in cover to use with 700 series. v5715 tee ?for branches at right angles. 5715 wh break out crescent twistout in cover to use with v700. v5717a internal pull elbow ?for inside surfaces at right angles. provides more space to simplify wire pulling. break out crescent twistout in corner to use with v700. v500, v700, & 700wh raceway & fittings 2 1/2" [64mm] 18" [457mm] overall 2" [51mm] note: use #6 ?t head screws with all ?tings requiring screws except v504/v704, and v57200 series; with v504/v704 use #8 pan head sc rews; with v57200 series use #8 ?t head screws. 2 1/2" [64mm] 2 1/2" [64mm] 2" [51mm] 2 1/2" [64mm] 7/8" [22.2mm] 2 1/2" [64mm] 2 1/2" [64mm]
catalog no./item description/speci?ations v57240 m 15a, 125v single pole switch and box accommodates other standard single-gang switches in place of furnished standard single pole switch. cover has twistouts for v500 or v700 on each end. twistout on ends permits running raceway close to interior trim. base has 1/2" trade size kos. v57242 utility box ?for use as tee, cross, pull box, junction box, blank box, etc. cover has 1/2" trade size ko and twistouts for v500 and v700 on each end and side. end twistouts permit running raceway close to interior trim. base has 1/2" trade size kos. catalog no./item description/speci?ations v57243g m 15a, 125v duplex grounding receptacle (nema 5-15r) and box accommodates other standard 15a (nema 5-15r) or 20a (nema 5-20r) duplex devices in place of furnished duplex grounding receptacle. cover has twistouts for v500 and v700 on each end and side. end twistouts permit running raceway close to interior trim. base has 1/2" trade size kos. v5741 m device box ?for shallow type 5741 wh m switches (three-way, single, and double pole) and receptacles, (three-wire locking receptacles and single-gang combination devices). base has 1/2" trade size ko. end twistout permits running raceway close to interior trim. 4 catalog no./item description/speci?ations v5786 adjustable offset connector ? v5786 wh eliminates offsetting raceway when connecting to surface type panel boxes. the adjustment from surface to center of bushings is 5/8" [15.9mm] minimum to 1 3/8" [35mm] maximum. break out crescent twistout in cover to use with 700 series. 1/2" [12.7mm] chase nipple and locknut furnished. 5790b armored cable connector (galvanized) ?for connecting 14/2, 14/3, 12/2, and 12/3 armored cable to wiremold ?tings. use a short piece of v500/v700 raceway (1 5/8" [41mm] min.) between this connector and ?ting. not for connection to 1/2" [12.7mm] flex conduit. 5791 5700 series box emt connector ? joins 1/2" [12.7mm] emt directly into any v5700 series wiremold box. catalog no./item description/speci?ations v2475d 2400 series raceway bridge fitting ?for allowing 2400 series raceway to bridge over existing installations of v500/v700 series raceway v4075da 4000 series raceway bridge fitting ?for allowing 4000 series raceway to bridge over existing installations of v500/v700 series raceway. 1 3/8" [35mm] 2 3/8" [61mm] 2 1/4" [57mm] 7/8" [22.2mm] 1" [25mm] 2" [51mm] 1 3/4" [45mm] v500, v700, & 700wh raceway & fittings (continued) 8 1/8" [206mm] 4 3/4" [121mm] 3 9/16" [90mm] note: use #6 ?t head screws with all ?tings requiring screws except v504/v704, and v57200 series; with v504/v704 use #8 pan head screws; with v57200 series use #8 ?t head screws. v500, v700, & 700wh device boxes 2" [51mm] 1 3/8" [35mm] 4 1/8" [105mm] 2" [51mm] 2" [51mm] 1 3/8" [35mm] 4 1/8 [105mm] 1 3/8" [35mm] 4 1/8" [105mm] 4 5/8" [118mm] 1 3/8" [35mm] 2 13/16" [72mm] notes: covers on this page have double twistouts. break out lower twistout for use with v500, and both twistouts for use with v700. * v5744-2 and v5744s-2 base and v5747-2 and v5748-2 base have 1/2" and 1" concentric trade size kos and a 1 13/16" x 2 7/8" [47mm x 73mm] rectangular ko to permit mounting on a one-gang in-wall outlet box. m replace v with vc or wh with whc to denote canadian version ?agency approved for sale in canada. c ? larger gangs available, consult factory.
5 catalog no./item description/speci?ations v5748 m ? device box ?for deep 5748 wh m ? switches, receptacles and communication devices. base has two 1/2" trade size kos. v5748s m shallow switch and 5748 swh m receptacle box ?for duplex receptacles (shallow type). base has 1/2" trade size kos. v5751 flush-type extension 5751 wh adapter ?for extensions from existing ?sh wall boxes. larger gangs available, consult factory. v5751a deep flush-type 5751awh extension adapter ? for deep extensions from existing ?sh wall boxes. catalog no./item description/speci?ations v5744 m ? extra deep device box ? 5744wh m ? designed for deep devices momentary contact, and remote control switches, hospital signaling system devices, and deep communication devices. base has 1/2" trade size kos. v5744s m ? deep switch and 5744 swh m ? receptacle box ?for installing signal system alarm wiring and communication devices. base has 1/2" trade size and rectangular single-gang kos. v5745 m ?c ombination device box ? 5745 wh m ? for connecting surface runs of 1/2" [12.7mm] conduit, etc. cover has two raceway twistouts on one end and three on opposite end; also two 1/2" trade size kos and a raceway twistout on each side. base has two 1/2" trade size kos. v5747 m ? shallow device box 5747 wh m ? for standard shallow switches, receptacles, communication devices, and single-gang combination devices. base has two 1/2" trade size kos. v500, v700, & 700wh device boxes (continued) cat no. l w gang # v5744, wh m 4 5/8" [118mm] 2 7/8" [73mm] 1 v5744-2, wh m 4 3/4" [121mm] 4 3/4" [121mm] 2* v5744-3 m 4 5/8" [118mm] 6 1/2" [165mm] 3 l w 2 1/4" [57mm] l w 2 3/4" [70mm] notes: covers on this page have double twistouts. break out lower twistout for use with v500, and both twistouts for use with v700. * v5744-2 and v5744s-2 base and v5747-2 and v5748-2 base have 1/2" and 1" concentric trade size kos and a 1 13/16" x 2 7/8" [47mm x 73mm] rectangular ko to permit mounting on a one-gang in-wall outlet box. m replace v with vc or wh with whc to denote canadian version ?agency approved for sale in canada. c ? larger gangs available, consult factory. l w 1 3/4" [44mm] 2 7/8" [73mm] 4 5/8" [118mm] l 1 3/4" [44mm] 1 3/8" [35mm] w ort p&s open ort p&s open ort p&s open ort p&s open ort p&s open 4 5/8" [118mm] 2 7/8" [73mm] 15/16" [23.8mm] 15/16" [23.8mm] l w 1 3/4" [44mm] 4 5/8" [118mm] 2 7/8" [73mm] ort p&s open ort p&s open ort p&s open cat no. l w gang # v5744, wh m 4 5/8" [118mm] 2 7/8" [73mm] 1 v5744-2, wh m 4 3/4" [121mm] 4 3/4" [121mm] 2* v5744-3 m 4 5/8" [118mm] 6 1/2" [165mm] 3 cat no. l w gang # v5747, wh m 4 5/8" [118mm] 2 7/8" [73mm] 1 v5747-2, wh m 4 3/4" [121mm] 4 3/4" [121mm] 2* v5747-3 m 4 5/8" [118mm] 6 1/2" [165mm] 3 cat no. lw gang # v5748, wh m 4 5/8" [118mm] 2 7/8" [73mm] 1 v5748-2, wh m 4 3/4" [121mm] 4 3/4" [121mm] 2* v5748-3 m 4 5/8" [118mm] 6 1/2" [165mm] 3 v5748-4 m 4 5/8" [118mm] 8 11/32" [212mm] 1 v5748-5 m 4 3/4" [121mm] 10 5/32" [212mm] 2* v5748-6 m 4 5/8" [118mm] 11 31/32" [165mm] 3 cat no. l w gang # v5751, wh 4 5/8" [118mm] 2 7/8" [73mm] 1 v5751-2, wh 4 3/4" [121mm] 4 3/4" [121mm] 2* v5751-3 4 5/8" [118mm] 6 1/2" [165mm] 3
catalog no./item description/speci?ations v5736 blank cove r use with v5735, v5737, v5737a, v5738, v5738a, v5739, or v5739a, or v2135 converting them to pull or junction boxes and for hanging lightweight pendant ?tures having 1/2" [12.7mm] pipe stems, etc. has 1/2" trade size ko. v5737 * m extension box/open base ? v5737a * m for mounting on 3 1/4" [83mm], v5739 a* m 4" [102mm] conduit boxes, or 5737 wh * m other recessed outlets. cover takes 5737 awh* m devices with mounting screw centers of 2 3/4", 3 1/2", or 4 1/16" [70mm, 89mm, or 104mm]. use as a pull or junction box with v5736. catalog no./item description/speci?ations v5731 m blank cover use with v5733 to convert into a pull or junction box. has 1/2" trade size ko in center. v5733 m * outlet box ?designed for devices with mounting screw centers of 1 15/32", 1 5/8", 1 22/32", or 1 27/32" [37mm, 41mm, 60mm, or 45mm]. accepts any device that mounts on g or h type conduit ?tings. v5735 m distribution box each side accepts three parallel raceway runs. base has 1/2" and 1" concentric trade size kos and a 1 13/16" x 2 7/8" trade size ko to mount on a one-gang in-wall outlet box. cover takes devices with mounting screw centers of 2 3/4", 3 1/2", and 4 1/16" [70mm, 89mm, and 104mm], and canopy ?tures 4 5/8" [118mm] diameter or smaller. used as a pull or junction box with v5736. 6 cat. no. dia. a. v5737, wh 4 3/4" [121mm] v5737a, wh 5 1/2" [140mm] v5739a 6 3/8" [162mm] a 1" [25mm] 7/16" [11.1mm] 4 3/8" [35mm] 2 3/8" [61mm] diameter 15/16" [23.8mm] 3" [76mm] diameter 1/4" [6.4mm] v500, v700, & 700wh round fixture boxes 4 3/4" [121mm] sq. 1 3/8" [121mm] catalog no./item description/speci?ations r5752 (red) two-gang alarm device box ? v5752 (ivory) for surface mounting alarm devices and safety signals designed to ? 4" [102mm] square back boxes. cover has three raceway twistouts on each side. base has 1/2" and 1" trade size concentric and single-gang box kos. r5753 (red) two-gang extra deep alarm v5753 (ivory) device box ?for surface mounting alarm devices and safety signals designed to ? 4" [102mm] square back boxes. cover is 2 3/4" [70mm] deep and has three raceway twistouts on each side. base has 1/2" and 1" trade size concentric and single-gang box kos. catalog no./item description/speci?ations v5760 blank extension box ?for extending from existing ?sh switch and receptacle boxes to blank original outlet. closed base available, consult factory. notes: covers on this page have double twistouts. break out lower twistout for use with v500, and both twistouts for use with v700. m replace v with vc or wh with whc to denote canadian version ?agency approved for sale in canada. c * these boxes are not designed to support ceiling fans. for fan applications, use v5738af. 1 3/8" [35mm] 4 11/16" [120mm] 4 11/16" [120mm] 4 5/8" [118mm] 15/16" [23.8mm] 2 7/8" [73mm] 4 11/16" [120mm] 2 3/4" [70mm] 4 11/16" [120mm] v500, v700, & 700wh device boxes (continued) note: covers have double twistouts; lower twistout for v500, and both twistouts for v700. m replace v with vc or wh with whc to denote canadian version ?agency approved for sale in canada. c * these boxes are not designed to support ceiling fans. for fan applications, use v5738af.
7 catalog no./item description/speci?ations v5738* m fixture box/solid base ?for v57378a* m hanging ?tures. cover takes v5739* m devices with mounting screw 5738 w h* m centers of 2 3/4", 3 1/2", or 4 1/16" 5738 awh* m [70mm, 89mm, or 104mm]. base has four holes for ?ture studs; ?e 1/2" trade size kos and raised section for no-bolt ?ture-stud. use as a junction or pull box with v5736. catalog no./item description/speci?ations v5738 af fan box/solid base ?ul approved 5738 afwh m ?ture box for ceiling fans. cover accepts fan brackets with 3.2" [82mm] mounting centers. supports up to 50 lbs. base has six mounting holes and four 1/2" trade size kos. #10 mounting screws provided. a 1" [25mm] 1" [25mm] 5 1/2" [140mm] note: covers have double twistouts; lower twistout for v500, and both twistouts for v700. m replace v with vc or wh with whc to denote canadian version ?agency approved for sale in canada. c * these boxes are not designed to support ceiling fans. for fan applications, use v5738af. v500 & v700 series wire fill capacity charts * 20% cable ?l is calculated to approximate reduction in cable capacity due to connectors mounted within raceway and ?tings that may restrict cross sectional area. ** 40% cable ?l is the maximum designed cable ?l based on a proposed revision to tia/eia 569-a. o.d. v500 series v700 series cable/wire size inches [mm] 20% fill* 40% fill** 20% fill* 40% fill** unshielded 4-pair, 24 awg, cat 3 0.190 [4.8] 1 2 1 3 twisted pair 4-pair, 24 awg, cat 5e 0.210 [5.3] 1 2 1 3 4-pair, 24 awg, cat 6 0.250 [6.3] 0 1 1 2 telephone 2-pair, 24 awg 0.140 [3.6] 2 4 3 6 3-pair, 24 awg 0.150 [3.8] 2 4 2 5 4-pair, 24 awg 0.190 [4.8] 1 2 1 3 25-pair, 24 awg 0.410 [10.4] 0 0 0 0 coaxial rg58/u 0.195 [5.0] 1 2 1 3 rg59/u 0.242 [6.1] 0 1 1 2 rg62/u 0.242 [6.1] 0 1 1 2 rg6/u 0.270 [6.9] 0 1 0 1 twinaxial 100 ohm 0.330 [8.4] 0 0 0 1 shielded type 1 0.390 [9.9] 0 0 0 0 twisted pair type 2 0.465 [11.8] 0 0 0 0 type 3 0.245 [6.2] 0 1 0 1 fiber mini zipcord 0.079 x 0.157 [2 x 4] 3 6 4 8 zipcord 0.118 x 0.236 [3 x 6] 1 2 1 3 round 4 strand fiber 0.187 [4.8] 1 2 1 3 round 6 strand fiber 0.256 [6.5] 0 1 1 2 wire size o.d. number of conductors 40% fill thhn/thwn inches [mm] v500 series v700 series 14 awg 0.111 [2.8] 7 10 12 awg 0.130 [3.3] 5 7 10 awg 0.164 [4.2] 3 4 v500/ v700 series raceway wire fill capacities for power v500/ v700 series raceway wire fill capacities for communications v500, v700, & 700wh round fixture boxes (continued) cat. no. dia. a. v5738, wh 4 3/4" [121mm] v5738a, wh 5 1/2" [140mm] v5739 6 3/8" [162mm] catalog no./item description/speci?ations 605k replacement blade for 605 and 607k 607 cutters ?replacement case-hardened steel blades cut clean and square. catalog no./item description/speci?ations 605 v500 raceway cutter 607 700 series raceway cutter ? single action portable cutter. one-piece raceway tools
now you have a wide range of options for providing datacom connectivity into wiremold cable management systems. they are: ortronics tracjack and series ii modular connectivity solutions pass & seymour activate modular inserts open system communication modules use these icons to determine connectivity options for each wiremold system component: ortronics connectivity tracjack individual jack system front-loading, snap-in design supports future moves adds and changes inserts for voice, data, audio, and video available category 3, 5e, 6, usoc 6-position, and other media flat or angled 45 exit con?urations choice of 13 colors and color matched to wiremold systems universal t568a/b wiring format series ii front-loading, module system module design features easy snap-in front-loading design linear 110 punch down format for easy termination inserts for voice, data, audio, and video available category 3, 5e, 6, usoc 6-position, and other media available in ?t or angled 45 exit con?urations color matched to wiremold systems for detailed product selection refer to the ortronics catalog or visit www.ortronics.com. pass & seymour legrand network wiring activate series front-loading inserts modular inserts for voice, data, audio and video applications front-load, snap-in design color and texture matched to wiremold systems available category 3, 5e, 6, as well as 6-position usoc universal t568a/b wiring format for detailed product selection refer to the pass & seymour network wiring catalog or visit www.passandseymour.com. open connectivity solutions wiremold open system communications modules accommodate a wide range of manufacturers?communications outlets including keystone jacks, as well as proprietary solutions from avaya (lucent) and nordx modules insert into a wide range of wiremold systems pre-punched faceplates accept common communication devices ort p&s open ort p&s open ort p&s open ort p&s open ort p&s open ort p&s open datacom connectivity options note: for more information on integrating connectivity into wiremold cable management systems contact the wiremold applications engineering team or your local wiremold sales representative. wiremold / legrand u.s. and international: 60 woodlawn street ? west hartford, ct 06110 1-800-621-0049 ? fax 860-232-2062 ? outside u.s. 860-233-6251 canada: 570 applewood crescent ? vaughan, ontario l4k 4b4 1-800-723-5175 ? fax 905-738-9721 ed532r13 ? updated april 2005 ? for latest specs visit www.wiremold.com ?copyright 2005 the wiremold company all rights reserved
|
