product offering long life: up to 50,000 hours with proper thermal management entire strip consists of 96 leds length of entire strip is 3.17 ft. (965mm) available in warm white and cool white color temperatures ? ? ? ? optimal operation with opto - tronic ot 24v power supplies (literature code ecs050r1) minimal heat generation low profle <16.6mm ip67 rated ? ? ? ? the sylvania linearlight multi flex provides new dimensions for innovative lighting. linearlight multi flex modules offer exciting new possibilities for general illumination applications. they provide an alternative choice for linear applications such as cove lighting, refrigeration cases and pathway marking. linearlight multi flex modules are ideal for edge lighting trans - parent and diffuse materials. they provide an optimal solution for precise backlighting of complex contours. they can also be used for lifesaving/rescue sign lights and commercial signs and for marking contours like escape routes, borders and stairs. optotronic ? power supplies from sylvania are specially designed to operate the linearlight multi flex modules. a wide range of 24v power supplies are available. applications cove lighting edge lighting transparent/ diffuse materials border marking commercial signs emergency/rescue signs path & contour marking backlighting complex contours refrigeration cases display shelves recessed lighting application information linearlight multi flex flexible led strip www.sylvania.com key features & benefts ordering description maximum wattage (w) color llmultiflx/thn/w3-827-3.2ft 6w per module white-2700k llmultiflx/thn/w3-865-3.2ft 6w per module white-6500k llmultiflx/thn/w3-880-3.2ft 6w per module white-8800k mounting accesories llmultiflx/install-screws C used with all products llmultiflx/install-tool C used with all products llmultiflx/str-channel-3.2 ft C used with 70182 and 70205 llmultiflx/thn/flx-channel-3.2 ft C used with 70181 llmultiflx/thn/str-channel-3.2 ft C used with 70182 and 70205 note: all products can ft in all channels and be secured with small screw, but it is not recommend - ed for ultimate performance. led062r2 1/09 specifcations and certifcations the sylvania linearlight multi flex is ul2108 listed for us and canada class 2 unit (ul fle # e247649) rohs compliant listed in sign components manual (sam) u l us c listed
catalog # type project comments prepared by date ll multi flex / thn / w3-888 linearlight white multi flex 8500k ordering guide minimum and maximum ratings parameter symbol values operating temperature t op -10 to +40c (-18 to +104f) storage temperature range t stg -40 to +85c (-22 to +185f) voltage range v max 23 C 25v dc 1. temperature should be measured at any point on the module. operating temperature range for red and yellow modules is -30c to +85c. 2. the maximum operating range at any point (up to 75c) is to specify the absolute maximum tc temperature without causing permanent damage to the leds. *maximum rated life can be achieved if maximum temperature does not exceed 40c. specifcation data ordering information item ordering max. volts current viewing number color luminous lumens width number abbreviation color watts (vdc) (amps) angle () of leds temp (k) flux (lm) per foot (mm) 70205 llmultiflx/thn/w3-827-3.2ft white 6.0 24 0.25 45 96 2700 83 26 8 70182 llmultiflx/thn/w3-865-3.2ft white 6.0 24 0.25 45 96 6500 180 56 8 70181 llmultiflx/thn/w3-880-3.2 ft white 6.0 24 0.25 45 96 8800 88 28 7 optotronic ? 20w (51512) optotronic 75w (51513, 51514) optotronic 96w (51511) max. load max. load max. load led no. of length wattage no. of length wattage no. of length wattage description modules (ft) (w) modules (ft) (w) modules (ft) (w) llmultiflx/thn/w3-xxx-3.2 ft 3 9.6 18 12 3.2 72 16 3.2 9 xxx represents color temperature. packaging information: case qty.: 10 min. order qty.: 1 power supply ordering information mounting accessories external internal base item product length width height width width number description (mm) (mm) (mm) (mm) (mm) 70220 llmultiflx/install C screws 70207 llmultiflx/install C tool 70206 llmultiflx/str-channel C 3.2 ft** 1000 9 18.5 8 20 70187 llmultiflx/thn/flx-channel C 3.2 ft* 1000 9 9 7 8 70188 llmultiflx/thn/str-channel C 3.2 ft** 1000 9 16.5 8 20 * flex channel only used with 70181 ** 70206 and 70188 can be used with 70205 and 70182
item number ordering abbreviation description 70206 llmultiflx/str-channel used with 70182 & 70205 70187 llmultiflx/thn/flx-channel used with 70181 70188 llmultiflx/thn/str-channel used with 70182 & 70205 70220 llmultiflx/install-screws 70207 llmultiflx/install-tool accessories assembly diagram safety information 1. the led module and all of its components must not be subjected to mechanical stress. 2. assembly must not damage or destroy conducting paths. 3. the led module incorporates no protection against short circuits, overload or overheating. therefore, it is absolutely necessary to operate the modules with an electrically stabilized power supply offering protection against the above mentioned safety risks. optotronic power supplies are specifically designed with protection features for safe operation. use of third party power supplies is not recommended. 4. installation of the led modules and sylvania led power supplies should adhere to all applicable electrical and safety standards. only qualified personnel should perform installations. 5. correct electrical polarity needs to be observed. incorrect polarity may destroy the module. 6. all led modules, up to the maximum number allowable for the power supply, should be installed in a parallel electrical connection (red to red and black to black), with a maximum of three modules in series. see note #2 in the electrical connection section on next page. 7. pay attention to standard esd precautions when handling and installing the module. 8. only install according to the parameters outlined in the assembly information section.
? 2009 osram sylvania 1/09 photography optotronic is a registered trademark of osram gmbh. sylvania is a registered trademark of osram sylvania inc. specifcations subject to change without notice. assembly information for complete installation requirements, refer to the linearlight multi flex user guide precautions 1. the led module will not stretch like ordinary rubber. stretching will cause damage to the internal circuits. 2. do not pull on the lead wires as there is risk of damage to the circuit. 3. bending of the module can be accomplished only at the spaces between the led. avoid strained angles. do not bend the led module in the vertical axis. 4. apply even force over the entire led module when inserting into an aluminum channel. power supply selection 1. refer to the section power supply ordering information for identification of the power supply requirement for a specified led load. 2. the linearlight multi flex requires a 24vdc power supply. each led module has a maximum load rating of 6 watts. do not operate an led load in excess of the capacity of the power supply. electrical connection 1. the led module is equipped with polarized wires (red C positive, black C negative). connect the low voltage load side of the power supply to the led module ensuring correct polarity of the electrical connection. crimp style or wire nut may be used along with insulating tape or shrink tubing. 2. up to 3 led modules can be connected in series to a single power feed connection. for large installations, connect multiple (3 module sets) in parallel. cutting 1. cutting the linearlight multi flex led module is possible every 6 leds. please refer to the linearlight multi flex user guide for the exact location. 2. apply silicone sealant after cutting the module. 3. each module can be cut into no more than two workable sections. you must maintain the end sections with the existing leads. middle sections without leads cannot be used. definition of a ul 2108 listed low voltage lighting system as it pertains to this module includes: 1. a ul listed class 2 power supply. 2. an appropriate number of sylvanias linearlight multi flex led modules based on the recommended max number of modules listed. 3. splice connectors/cable systems. 4. mounting channel. the power supply must be mounted, wired, and grounded in accordance with all applicable nec and ansi standards. all modular connections on the secondary side of the power supply must be made using an appropriate ul rated splice connection means. this connection means must be rated for the environment it is installed into. if additional wires and/or splice connections are necessary, wires are to be ul listed and splice connectors must be ul rated and chosen of appropriate size for number and size of wires to be connected. warning: the low voltage secondary circuit shall not be grounded. this information shall not supersede the requirement to follow all other safety, assembly and any other instructions listed in this document. united states osram sylvania 100 endicott street danvers, ma 01923 trade phone: 1-800-255-5042 fax: 1-800-255-5043 national accounts phone: 1-800-562-4671 fax: 1-800-562-4674 oem/special markets phone: 1-800-762-7191 fax: 1-800-762-7192 display/optic phone: 1-888-677-2627 fax: 1-800-762-7192 canada osram sylvania ltd. 2001 drew road mississauga, on l5s 1s4 trade phone: 1-800-263-2852 fax: 1-800-667-6772 oem/special markets/display/optic phone: 1-800-265-2852 fax: 1-800-667-6772 www.sylvania.com
|
