document number: 34054 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 15-jul-09 1 inductors, epoxy conformal coated, uniform roll coated, axial leaded ir vishay dale electrical specifications inductance tolerance: 1 %, 3 %, 5 %, 10 %, 20 % other tolerances av ailable on request insulation resistance: 1000 m minimum per mil-std-202, method 302, test condition b dielectric strength: 1000 v ac per mil-std-202, method 301 material specifications coating: epoxy-uniform roll coated lead: tinned copper mechanical specifications terminal strenght: 5 pounds pull per mil-std-202, method 211, test condition a weight: ir-2 = 0.30 g maximum ir-4 = 0.65 g maximum features ? flame-retardant coating ? color band identification ? excellent environmental characteristics ? uniform coating is excellent for automatic insertion ? comparable in quality to mo lded chokes at a lower price ? epoxy coating is more du rable than lacquer coated models, yet is priced comparably ? compliant to rohs directive 2002/95/ec test equipment (1) ? h/p 4342a q-meter ? measurements corporation megacycle meter, model 59 ? whearstone bridge note (1) test procedures per mil-prf-15305 dimensions in inches [millimeters] model a (max.) b (max.) c (max.) d ir-2 0.260 [6.60] 0.120 [3.05] 0.330 [8.38] 0.0200 0.0015 [0.508 0.038] ir-4 0.385 [9.78] 0.180 [4.57] 0.440 [11.18] 0.025 0.002 [0.635 0.051] d c max. b max. a max. 1.25 [31.75] min. 1.63 [41.28] max. environmental performance test conditions specifications barometric pressure c mil-std-202, method 105 thermal shock a-1 mil-std-202, method 107 flammability - mil-std-202, method 111 overload - mil-prf-15305 low temperature storage - mil-prf-15305 resistance to soldering heat a mil-std-202, method 210 resistance to solvents - mil-std-202, method 215 maximum temperature rise model operating temperature range ir-2 0.1 h to 1.0 h = + 35 c at + 90 c ambient - 55 c to 125 c 1.2 h to 27 h = + 15 c at + 90 c ambient - 55 c to 105 c 33 h to 1000 h = + 15 c at + 90 c ambient - 55 c to 105 c ir-4 0.15 h to 4.7 h = + 35 c at + 90 c ambient - 55 c to 125 c 5.6 h to 33 h = + 15 c at + 90 c ambient - 55 c to 105 c 36 h to 240 h = + 15 c at + 90 c ambient - 55 c to 105 c 270 h to 1800 h = + 35 c at + 90 c ambient - 55 c to 125 c
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34054 2 revision: 15-jul-09 ir vishay dale inductors, epoxy conformal coated, uniform roll coat ed, axial leaded standard electrical specifications model ind. (h) tol. (%) q min. test frequency l and q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) ir-2 0.10 10 40 25.0 680.0 0.08 1350 phenolic core ir-2 0.12 10 40 25.0 640.0 0.09 1270 ir-2 0.15 10 38 25.0 600.0 0.10 1200 ir-2 0.18 10 35 25.0 550.0 0.12 1105 ir-2 0.22 10 33 25.0 510.0 0.14 1025 ir-2 0.27 10 33 25.0 430.0 0.16 960 ir-2 0.33 10 30 25.0 410.0 0.22 815 ir-2 0.39 10 30 25.0 365.0 0.30 700 ir-2 0.47 10 30 25.0 330.0 0.35 650 ir-2 0.56 10 30 25.0 300.0 0.50 545 ir-2 0.68 10 28 25.0 275.0 0.60 495 ir-2 0.82 10 28 25.0 250.0 0.85 415 ir-2 1.0 10 25 25.0 230.0 1.00 385 ir-2 1.2 10 25 7.9 150.0 0.18 590 iron core ir-2 1.5 10 28 7.9 140.0 0.22 535 ir-2 1.8 10 30 7.9 125.0 0.30 455 ir-2 2.2 10 30 7.9 115.0 0.40 395 ir-2 2.7 10 37 7.9 100.0 0.55 355 ir-2 3.3 10 45 7.9 90.0 0.85 270 ir-2 3.9 10 45 7.9 80.0 1.0 250 ir-2 4.7 10 45 7.9 75.0 1.2 230 ir-2 5.6 10 50 7.9 65.0 1.8 185 ir-2 6.8 10 50 7.9 60.0 2.0 175 ir-2 8.2 10 55 7.9 55.0 2.7 155 ir-2 10.0 10 55 7.9 50.0 3.7 130 ir-2 12.0 10 45 2.5 40.0 2.7 155 ir-2 15.0 10 40 2.5 35.0 2.8 150 ir-2 18.0 10 50 2.5 30.0 3.1 145 ir-2 22.0 10 50 2.5 25.0 3.3 140 ir-2 27.0 10 50 2.5 20.0 3.5 135 ir-2 33.0 10 45 2.5 24.0 3.4 130 ferrite core ir-2 39.0 10 45 2.5 22.0 3.6 125 ir-2 47.0 10 45 2.5 20.0 4.5 110 ir-2 56.0 10 45 2.5 18.0 5.7 100 ir-2 68.0 10 50 2.5 15.0 6.7 92 ir-2 82.0 10 50 2.5 14.0 7.3 88 ir-2 100.0 10 50 2.5 13.0 8.0 84 ir-2 120.0 10 30 0.79 12.0 13.0 66 ir-2 150.0 10 30 0.79 11.0 15.0 61 ir-2 180.0 10 30 0.79 10.0 17.0 57 ir-2 220.0 10 30 0.79 9.0 21.0 52 ir-2 270.0 10 30 0.79 8.0 25.0 47 ir-2 330.0 10 30 0.79 7.0 28.0 45 ir-2 390.0 10 30 0.79 6.5 35.0 40 ir-2 470.0 10 30 0.79 6.0 42.0 36 ir-2 560.0 10 30 0.79 5.0 46.0 35 ir-2 680.0 10 30 0.79 4.0 60.0 30 ir-2 820.0 10 30 0.79 3.8 65.0 29 ir-2 1000.0 10 30 0.79 3.4 72.0 28 ir-4 0.15 20 50 25.0 525.0 0.03 2450 phenolic core ir-4 0.22 20 50 25.0 450.0 0.055 1810 ir-4 0.33 20 45 25.0 360.0 0.09 1400 ir-4 0.47 20 45 25.0 310.0 0.12 1225 ir-4 0.56 10 50 25.0 280.0 0.135 1150 ir-4 0.68 10 50 25.0 250.0 0.15 1100 ir-4 0.82 10 50 25.0 220.0 0.22 900 ir-4 1.0 10 50 25.0 200.0 0.29 785 ir-4 1.2 10 33 7.9 180.0 0.42 650 ir-4 1.5 10 33 7.9 160.0 0.50 600 ir-4 1.8 10 33 7.9 150.0 0.65 525 ir-4 2.2 10 33 7.9 135.0 0.95 435 ir-4 2.7 10 33 7.9 120.0 1.20 385 ir-4 3.3 10 33 7.9 110.0 2.00 300 ir-4 3.9 10 33 7.9 100.0 2.30 280 ir-4 4.7 10 33 7.9 90.0 2.60 260 notes (1) measured with full length lead (2) rated dc current based on maximum temperature rise as shown in table
document number: 34054 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 15-jul-09 3 ir inductors, epoxy conformal coated, uniform roll coat ed, axial leaded vishay dale ir-4 5.6 10 45 7.9 60.0 32.0 495 iron core ir-4 6.8 10 50 7.9 55.0 0.50 395 ir-4 8.2 10 50 7.9 50.0 0.60 360 ir-4 10.0 10 55 7.9 45.0 0.90 290 ir-4 12.0 10 65 2.5 42.0 1.10 265 ir-4 15.0 10 65 2.5 40.0 1.40 240 ir-4 18.0 10 75 2.5 34.0 2.25 185 ir-4 22.0 10 75 2.5 30.0 2.50 175 ir-4 27.0 10 60 2.5 25.0 2.60 170 ir-4 33.0 10 65 2.5 19.0 3.0 165 ir-4 36.0 5 60 2.5 15.5 2.50 180 ir-4 39.0 5 60 2.5 14.5 2.60 176 ir-4 43.0 5 60 2.5 13.7 2.70 172 ir-4 47.0 5 55 2.5 13.0 2.75 170 ir-4 51.0 5 55 2.5 12.7 2.85 167 ir-4 56.0 5 55 2.5 12.0 3.0 164 ir-4 62.0 5 55 2.5 11.5 3.15 160 ir-4 68.0 5 55 2.5 11.0 3.30 156 ir-4 75.0 5 55 2.5 10.5 3.70 147 ir-4 82.0 5 50 2.5 10.3 3.90 143 ir-4 91.0 5 50 2.5 10.0 4.30 136 ir-4 100.0 5 50 2.5 9.5 4.50 133 ir-4 110.0 5 60 0.79 8.9 4.90 128 ir-4 120.0 5 65 0.79 8.7 5.20 124 ir-4 130.0 5 65 0.79 8.5 5.45 121 ir-4 150.0 5 65 0.79 8.0 6.05 114 ir-4 160.0 5 65 0.79 7.5 6.40 111 ir-4 180.0 5 65 0.79 7.0 6.75 108 ir-4 200.0 5 65 0.79 6.5 7.10 106 ir-4 220.0 5 65 0.79 6.2 7.45 103 ir-4 240.0 5 65 0.79 5.9 7.80 101 ir-4 270.0 5 65 0.79 5.7 11.0 129 ir-4 300.0 5 65 0.79 5.4 11.5 125 ir-4 330.0 5 65 0.79 5.1 12.0 123 ir-4 360.0 5 65 0.79 4.8 15.5 108 ir-4 390.0 5 65 0.79 4.5 16.3 105 ir-4 430.0 5 65 0.79 4.2 17.1 102 ir-4 470.0 5 65 0.79 3.9 17.9 100 ir-4 510.0 5 65 0.79 3.7 18.8 98 ir-4 560.0 5 65 0.79 3.5 24.7 85 ir-4 620.0 5 65 0.79 3.3 25.9 83 ir-4 680.0 5 55 0.79 3.1 27.2 81 ir-4 750.0 5 55 0.79 2.9 28.6 79 ir-4 820.0 5 55 0.79 2.7 30.0 77 ir-4 910.0 5 55 0.79 2.5 31.5 76 ir-4 1000.0 5 55 0.79 2.3 33.1 74 ir-4 1100.0 5 30 0.25 2.1 43.5 64 ir-4 1200.0 5 30 0.25 2.0 45.7 63 ir-4 1300.0 5 30 0.25 1.9 49.0 61 ir-4 1500.0 5 30 0.25 1.8 52.5 59 ir-4 1600.0 5 30 0.25 1.7 54.0 58 ir-4 1800.0 5 30 0.25 1.6 56.7 56 ordering information ir-2 10 h 10 % er e2 model inductance value inductance tolerance package code jedec lead (pb)-free standard global part number ir02 er 100 k model package code inductance value inductance tolerance standard electrical specifications model ind. (h) tol. (%) q min. test frequency l and q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) notes (1) measured with full length lead (2) rated dc current based on maximum te mperature rise as shown in table
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|