bcd . 002 8 2 _ aa_ j une - 2 6 - 2013 1 www.power - one.com data sheet ? instrumentation ? li ghting ? industrial applications ? applied computing ? renewable energy ? automation controls ? wireless data ? communication systems ? test and measurement ? robotics abc 6 0 series 6 0w ac/dc ? 60 w convection cooled ? - 20 to 50 deg c full load operation ? 90 - 264 vac input ? 2 x 4 x 1.2 (101.6 x 50.8 x 30.48 mm) ? no minimum load required - single output models ? conducted emi en 55022 - b, fcc part 15 level b ? ite safety agency approvals ? rohs compliant ? no load power < 0.3 w features applications
abc 6 0 series 2 www.power - one.com data sheet technical dat a : input parameter description/condition input voltage range. universal input 90 - 264 vac input frequency range 47 to 400 hz. (3) input surge current 264 vac (cold start) 40 a max. safety ground leakage current 120 vac < 500 ua 230 vac < 1000 ua input current 120 vac @ 60 w 230 vac @ 60 w 1.5 a 0.75 a output parameter description/condition voltage adjustment v1 10% transient response main output 50 to 100% load change, 50 hz, 50% duty cycle, 0.1 a / u sec, 50/60 hz < 10%, recovery time < 5 msec over voltage protection 130% typical short circuit protection 130% typical remote sense v1 0.5 vdc compensation efficiency >85% set point tolerance v1 = 3%, v2 & v3 = 5% rise time 100 msec ordering information product family volts (vdc) output current max (a) minimum load (a ) (4) ripple & noise total regulation ovp threshold abc60 - 1005g 5.2 10.0 0 1.25% 0.8% 130% typical abc60 - 1012g 12 5.4 0 1% 0.8% 130% typical abc60 - 1015g 15 4.33 0 1% 0.8% 130% typical abc60 - 1024g 24 2.7 0 1% 0.8% 130% typical abc60 - 1048g 48 1.35 0 1% 0.8% 130% typical abc60 - 300 0 g 5.2 8.0 0.5 1.25% 0.8% 130% typical 12.5 3.0 0.1 1% 5.3% - 12.5 0.5 0.0 1% 5.3% abc60 - 300 1 g 5.2 8.0 0.5 1.25% 0.8% 130% typical 23.8 1.5 0.1 1% 5.3% - 12.5 0.5 0.0 1% 5.3% abc60 - 300 2 g 5.2 8.0 0.5 1.25% 0.8% 130% typical 14.6 2.5 0.1 1% 5.3% - 16.2 0.5 0.0 1% 5.3% abc60 - 3003g 3.3 8.0 1.0 1.5% 0.8% 130% typical 5.2 3.0 0.1 1% 5.3% - 12.8 0.5 0.0 1% 5.3%
bcd . 002 8 2 _ aa_ j une - 2 6 - 2013 3 www.power - one.com data sheet notes: 1. maximum outputs for each output. max power rating should not be exceeded. 2. output noise measurement is made with a 20 mhz bandwidth using a 6 twisted pair, terminated with a 10 uf tantalum capacitor in parallel with a 0.1 uf ceramic capacitor. 3. safety approved: 47 to 63 hz. 4. minimum load specified to meet cross regulation. 5. specif ications are for nominal input voltage, 25 c and max load unless otherwise stated. 6. class 1 models have earthing tab j4. class 2 models ( - 2 suffix) have no earthing tab. 7. unit will turn on at - 40 c and will operate but ripple and noise will be 3% for up to 5 minutes. 8. specifications subject to change without notice. 9. warranty 2 years. general specifications parameter description/condition hold up time 6 msec 120 vac input mtbf >100 khrs mil - hdbk - 217f switching frequency 67 khz typical isolation voltage input to output: min 4242 vdc input to ground 2120 vdc weight 150 g (0.33 lbs) environmental parameter description/condition operating temperature - 20 to 50 c full load. full load 50 to 70 c derate linearly to 50% at 70 c storage temperature - 40 to 70 c relative humidity 95% non - condensing altitude operating 10,000 ft. non - operation 40,000 ft. conducted emissions: en55022, fcc part 15 level b radiated emissions en55022, fcc part 15 level b to be controlled in end system electromagnetic susceptibility en61000 - 4 2, 3, 4, 5 level 3 harmonic current en61000 - 3 - 2, class a safety parameter description/condition en / ul / csa en60950 - 1+a12:2011, iec60950 - 1 2 nd +a1 2009, csa - 22.2 no 60950 - 01 - 07+ a1, ul60950 - 1 - 2011
abc 6 0 series 4 www.power - one.com data sheet figure 1 output power vs. temperature figure 2 dimension drawing (top and side view) mechanical input = j1 earthing tab = j4 dc output = j2 remote sense = j3 pin 1: ac neutral pin 2: ac line molex: 19705 - 4301 pin 1 = v1 pin 2 = v1 pin 3 = rtn pin 4 = rtn pin 5 = v3 pin 6 = v2 pin 1 = +v1 sense pin 2 = - v1 sense mating connector: molex: 09 - 50 - 3031 pins: 08 - 50 - 0106 mating connector: molex: 190030001 mating connector: tyco: 647402 - 6; pins: 3 - 647409 - 1 mating connector: molex: 22 - 01 - 2021 copyright ? 2010 power - one inc. all rights reserved. words and logos that are identified as trademarks and/or service marks are, unless noted otherw ise, the trademarks and service marks of power - one inc. in the u.s. and other countries. all other product o r service names are the property of their respective holders. power - one products are protected under numerous u.s. and foreign patents and pending applications, maskwork rights, and copyrights. power - one reserves the right to make changes to any products a nd services at any time without notice. power - one assumes no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in writing by power - one inc. nuclear and m edical applications - power - one products are not designed, intended for use in, or authorized for use as critical components in life su p- port systems, equipment used in hazardous environments, or nuclear control systems without the express written consent o f the respective divisional president of power - one, inc. technical revisions - the appearance of products, including safety agency certifications pictured on labels, may change depending on the date manuf a c- tured. specifications are subject to change without notice.
|