surface mount tip and ring filters document 492 document 492 revised 11/10/05 these surface mount tip and ring flters provide substan - tial reduction of noise throughout an extended frequency range. their economical design makes them attractive for a wide variety of applications. free evaluation samples are available by contacting coilcraft or ordering them on-line at www.coilcraft.com. 0.050 1,27 cen 0.060 1,52 0.030 0,76 recommended land p attern 8 1 5 4 0.200 5,08 notch indicates pin 1 0.012 0,305 0.098 2,50 0.138 0.006 3,50 0,15 0.217 0.008 5,50 0,20 0.317 0.012 8,05 0,30 0.020 0,50 0.050 1,27 cen 0.0395 1,00 0.236 6,00 dimensions are typical prior to applying solder 1 4 5 8 0.307 0.008 7,80 0,20 0.007/0,18 * ** 30 40 20 10 0 -10 0.1 11 0 100 1000 frequency (mhz) attenuation (db) re: 50 ohms diff erential mode common mode ** measured on agilent/hp 8753d network analyzer. typical response ** part number 1 ptrf2000l_ ptrf4000l_ lines 1 2 minimum inductance: 35 h 35 h (each winding @130 khz) rated current: 500 ma 500 ma dcr each winding: 0.075 max 0.135 max dielectric strength: 1500 vrms 1500 vrms (1C8) (1,2C7,8) 1. when ordering, please specify packaging code: ptrf4000l c packaging: c = 7 machine ready reel. eia-481 embossed plastic tape, 500 parts per full reel. b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine ready reel. eia-481 embossed plastic tape. factory order only, not stocked, 2200 parts per full reel. 2. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. 8 8 1 1 7 2 6 3 5 5 4 4 ptrf4000 ptrf2000 core material ferrite terminations rohs tin-silver-copper over tin over nickel over phos bronze weight 214 C 216 mg ambient temperature C40c to +85c storage temperature component: C40c to +85c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) packaging 500/7 reel; 2000/13 reel plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
