qt 9 2 series 5.0vdc and 3.3vdc , smd formed leads high - reliability clock oscillators ____________________________ ___________________________________________________________ q - tech corporation 10150 west jefferson blvd. culver city, ca 90232 tel (310) 836 - 7900 fax (310) 836 ? 2157 doc#0 9 2 - 001 rev. ? may 2006 www.q - tech.com page 1 o f 4 f eatures broad frequency ran ge from 500 khz to 160 mhz. rugged design for high shock and vibration. acmos, hcmos, ttl , lvhcmos logic. 5.0 v or 3.3v tri - state o utput option (d). fit s standard 7. 0 x 5.2mm smd oscillators? foot print. replace s commercial clocks in high - reliability military applications. electrical characteristics parameters (5.0v 10%) qt 9 2 ac qt 9 2 hc qt 9 2 t output frequency range (fo) 500.00 k h z ? 125.00 mhz (low frequency down to 1khz available in no - tristate) 500.00 k h z ? 85.000 mhz supply voltage (vdd) 5.0vdc 10% frequency stability vs. temperature see option codes operating temperature (topr) see option codes storage temperature (tsto) - 62 c to +125c symmetry ( 15pf at 50% output level ac or hc) ( 6ttl load at 1.4vdc ttl) 45/55% max. ( 500 khz ~ <1 6 mhz) 40/60% max. (1 6 mhz ~ 125mhz) (tighter symmetry available) operating supply current (idd) (no load) 20 ma max. ( 500 khz ~ < 16mhz) 25 ma ma x. (16mhz ~ < 32mhz) 35 ma max. (32mhz ~ < 60mhz) 45 ma max. (60mhz ~ = 125mhz) rise and fall times (tr/tf) (at 5.0vdc suppl y, 15pf//10kohms load) 6 ns max. (fo < 30m) 3ns max. (30m = fo = 12 5m) (between 10% to 90%) 7 ns max. (fo < 30m) 5 ns max. (30m = fo = 12 5m) (between 10% to 90%) 5ns max. (fo < 30 m) 3ns max. (30m = fo = 85m) (between 0.8v to 2v) output load (cl) 15pf // 10kohms (50pf max. or 10ttl for f = 60m) ( 30pf max. or 6 ttl for f = 85 m) 15pf // 10kohms (2lsttl) 10ttl (f < 60mhz) 6ttl (60mhz to 85mhz) start - up time (tstup) 15pf load 5ms m ax. output voltage (voh/vol) 0.9xvdd min. ; 0.1x vdd max. 2.4v min.; 0.4v max. enable/disable tristate function (add d) pin 1 vih = 2.2v oscillation; vi l = 0.8v high impedance jitter rms 1s (at 25c) 8ps typ. (<40mhz); 3ps typ. ( = 40mhz) aging (at 70c) 5ppm/year max. freq. vs. supply voltage tolerance (10%) 4ppm max. parameters (3.3v 10%) qt9 2 l output frequency range (fo) 500.000 k h z ? 160.000 mhz (low frequency down to 1khz available in no - tristate) supply voltage (vdd) 3.3 vdc 10% fre quency stability vs. temperature see option codes operating temperature (topr) see option codes storage temperature (tsto) - 62 c to +125c operating supply current (idd) (no load) 6 ma max. (500khz ~ < 16mhz) 10 ma max. (16mhz ~ < 32mhz) 20 ma max. (3 2mhz ~ < 60mhz) 30 ma max. (60mhz ~ < 100mhz)
qt 9 2 series 5.0vdc and 3.3vdc , smd formed leads high - reliability clock oscillators ____________________________ ___________________________________________________________ q - tech corporation 10150 west jefferson blvd. culver city, ca 90232 tel (310) 836 - 7900 fax (310) 836 ? 2157 doc#0 9 2 - 001 rev. ? may 2006 www.q - tech.com page 2 o f 4 40 ma max. (100mhz ~ < 130mhz) 45 ma max. (130mhz ~ 160mhz) symmetry ( 15pf, at 50% output level) 45/55% max. (500khz ~ <16mhz); 40/60% max. (16mhz ~ 160mhz) (tighter symmetry available) rise and fall times (tr/tf) (at 3.3vdc supply, 15pf //10k ohms ) (between 10% and 90% of output level) 6ns max. (500khz to < 40mhz) 3ns max. (40mhz ~ 160mhz) output load (cl) 15pf // 10kohms (30pf max. for f = 50mhz) start - up time (tstup) 5ms max. output voltage (voh/vol) 0.9xvdd min. ; 0.1x vdd max. enable /disable tristate function (* d) pin 1 vih = 2.2v oscillation; vi l = 0.8v high impedance jitter rms 1s (at 25c, 3.3vdc supply) 15ps typ. (< 40mhz); 8ps typ. ( = 40mhz) aging (at 70c) 5ppm/year max. freq. vs. supply voltage tolerance (10%) 4ppm max. ordering information qt 92 l d 9 m - 100 .000mhz logic tristate option freq. stability vs. temper ature screening option ac = acmos hc = hcmos t = ttl l = lvhcmos (*) d (left blank if no tristate) not available for frequencies lower than 500khz. 1 = 100ppm at 0c to +70c 4 = 50ppm at 0c to +70c 5 = 25ppm at - 20c to +70c 6 = 50ppm at - 55c to +105c 9 = 50ppm at - 55c to +125c 10 = 100ppm at - 55c to +125c 11 = 50ppm at - 40c to +85c 12 = 100ppm at - 40c to +85c 1 4 = 20ppm at - 20c to +70c 1 5 = 25ppm at - 40c to +85c m (designate m for product level b mil - prf - 55310 environmental sc reening). ( left blank if unscreened) for frequency stability vs. temperature options not listed herein, please request a custom part number. part numbering examples: qt 9 2 acd9m - 100.000mhz; qt 9 2 t10 - 16.000mhz. s tandard screening per mil - prf - 55310, level b internal visual: mil - std - 883, method 2017 and 2032. stabilization bake: mil - std - 883, method 1008, cond. c. temperature cycling: mil - std - 883, method 1010, cond. b. constant acceleration: mil - std - 883, method 200 1, cond. a, y1 axis. seal fine leak: mil - std - 883, method 1014, cond. a. seal gross leak: mil - std - 883, method 1014, cond. c. burn - in: 160 hours, 125c with load. final electrical tests.
qt 9 2 series 5.0vdc and 3.3vdc , smd formed leads high - reliability clock oscillators ____________________________ ___________________________________________________________ q - tech corporation 10150 west jefferson blvd. culver city, ca 90232 tel (310) 836 - 7900 fax (310) 836 ? 2157 doc#0 9 2 - 001 rev. ? may 2006 www.q - tech.com page 3 o f 4 standard qci environ mental specification s : (custom requirements available upon request) vibration sinusoid al: mil - std - 202, method 204, cond. d. shock, non operating: mil - std - 202, method 213, cond. i. thermal shock, non operating: mil - std - 202, method 107, cond. b. ambient pressure, non operating: mil - std - 202, 105, cond. c, 5 min. dwell time . resistance to solde r heat: mil - std - 202, method 210, cond. e. moisture resistance: mil - std - 202, method 106. terminal strength: mil - std - 202, method 211, cond. c. resistance to solvents: mil - std - 202, method 215. solderability: mil - std - 202, method 208. standard packaging in anti - static plastic tube, unless otherwise specified. tape and reel packaging available. packaging quantity: 60 pcs/tube. 800 pcs/reel. pin no. function 1 tristate or nc 2 gnd/ca se 3 output 4 vdd dimensions: inch
qt 9 2 series 5.0vdc and 3.3vdc , smd formed leads high - reliability clock oscillators ____________________________ ___________________________________________________________ q - tech corporation 10150 west jefferson blvd. culver city, ca 90232 tel (310) 836 - 7900 fax (310) 836 ? 2157 doc#0 9 2 - 001 rev. ? may 2006 www.q - tech.com page 4 o f 4 remark: specifications subject to change without prior notice. please contact our factory or visit our website, www.q - tech.com , for technical notes and updates. please c o ntact us for variations on these specifications.
|