pn3010 / SPN3010* * part number for additional environmental screening. performance data frequency 5.0 - 500.0 mhz gain 30.0 db typical 28.0 db min noise figure 3.5 db typical 5.0 db max p 1db 21.5 dbm typical 20.0 dbm min 3 rd order intercept 34.0 dbm typical 2 nd order intercept 48.0 dbm typical vswr 1.2/2.0 input typ/max 1.8/2.0 output typ/max reverse isolation -35.0 db typical -33.0 db min power supply 12.0 volts 130.0 ma operating temperature -55.0 - 85.0 c package drawing gain db frequency (mhz) noise figure db
frequency (mhz) p 1db compression point dbm frequency (mhz) reverse isolation db frequency (mhz) input vswr frequency (mhz) output vswr frequency (mhz)
s-parameters frequency s11 mag s11 ang s21 mag s21 ang s12 mag s12 ang s22 mag s22 ang 5.0 0.080 105.00 33.560 15.00 0.010 13.00 0.220 -162.00 50.0 0.040 -30.00 31.600 -21.00 0.011 7.00 0.160 -165.00 100.0 0.050 -76.00 31.690 -44.00 0.012 9.00 0.190 -162.00 200.0 0.060 -149.00 31.970 -90.00 0.013 3.00 0.260 -176.00 300.0 0.080 148.00 32.040 -138.00 0.014 -1.00 0.290 163.00 400.0 0.070 78.00 30.840 172.00 0.015 -2.00 0.230 140.00 500.0 0.070 -45.00 29.030 121.00 0.016 -18.00 0.190 123.00 absolute maximum conditions maximum operating temperature -55.0 - 100.0 c maximum storage temperature -62.0 - 125.0 c maximum case temperature 125.0 c maximum supply voltage 18.0 volts continuous rf input power 13.0 dbm short term rf input power (1 minute max) 50.0 mw maximum peak power (3 sec max) 0.5 w amplifonix | 2707 black lake place | philadelphia, pa 19154 tel: 215.464.4000 | fax: 215.464.4001 | email: info@amplifonix.com
i2 technologies us, inc. html pages converte d to pdf document this document contain component information from the manufacturer's website which ar e not available in a revision controlled document from the ma nufacturer. to facilitate the addition of these parts into th e electronics database, we are converting the html pages rela ted to that part, from the manufacturer's website into adobe pdf format. the contents of this document is based on the in formation provided on the manufacturer's website, therefor e the information may have been changed by the manufacturer since this was created. powering the bottom line ? i2 technologies us, inc. 15445 innovation drive san diego, ca 92128
|
