smt data line emi filters C pdlf document 491-1 document 491-1 revised 10/30/08 current inductance part max 2 min 3 dcr max number 1 lines (ma) (h) (mohms) pdlf4000l_ 4 100 5 250 pdlf4500l_ 4 500 5 200 pdlf3000l_ 3 100 5 250 pdlf3500l_ 3 500 5 200 PDLF2000L_ 2 100 5 250 pdlf2500l_ 2 500 5 200 1. when ordering, please specify packaging code: pdlf4500l c c = 7 machine ready reel. eia-481 embossed plastic tape (500 parts per full reel). d = 13 machine ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter d instead. 2. current rating is for each line. 3. inductance is per winding, tested at 1 mhz. 4. operating temperature range -40c to +85c. 5. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. 30 20 10 0 -10 0.1 11 0 100 1000 frequency (mhz) atten uation (db) common mode diff erential mode * measured on hp 8753d network analyzer. ref: 50 ohms. typical response * designers kit d303 contains four each of all values plus dlf and ccdlf flters core material ferrite terminations rohs compliant tin-silver-copper over tin over nickel over phos bronze. other terminations available at additional cost. weight 183 C 201 mg ambient temperature C40c to +85c storage temperature component: C40c to +85c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) mean time between failures (mtbf) 26,315,789 hours packaging 500/7 reel; 2000/13 reel plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf ? available in 4, 3 and 2-line versions ? see our ccdlf series for 10 and 8-line emi flters ? exceptional common mode noise attenuation from 15 mhz to 300 mhz; passes signal line data below 300 mhz with minimal attenuation ? dc current capacity of 500 or 100 ma. ? excellent electrical isolation (300 vrms) us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
document 491-2 0.138 0.008 3,50 0,20 0.217 0.006 5,50 0,15 1 4 0.317 0.012 8,05 0,30 0.020 0,50 0.012 0,305 0.098 2,50 0.050 1,27 cen 0.0395 1,00 notch indicates pin 1 0.236 6,00 dimensions are typical pr ior to applying solder 0.050 1,27 cen 0.060 1,52 0.030 0,76 recommended land p attern 0.200 5,08 8 1 7 2 6 3 5 4 pdlf4000, 4500 8 1 7 2 6 3 5 4 pdlf3000, 3500 8 1 7 2 6 3 5 4 pdlf2000, 2500 5 8 1 4 5 8 0.307 0.008 7,80 0,20 0.007/0,18 1 4 5 8 pdlf xxxxl * ** dimensions are in inches mm document 491-2 revised 10/30/08 surface mount data line emi filters us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
