wall industries, inc. 5 watson brook road exeter, nh 03833 08/01/2011 603-778-2300 www.wallindustries.com fax 603-778-9797 page 1 of 5 datasheet rev. b pspdf-100 series 85~264vac (120~370vdc) input voltage range single outputs, active pfc up to 103.2 watts output power ac/dc switching power supplies features ? single output ? rohs compliant ? built-in active pfc function, pf > 0.93 ? universal ac input range (full range) ? high efficiency and high reliability ? over voltage, over load, and short circuit protected ? all using 105c long life electrolytic capacitors ? up to 103.2w output power ? 100% full load burn-in tested ? output voltages available from 5vdc to 48vdc ? dimensions: 7.64? x 3.90? x 1.97? ? output voltage adjustability description the pspdf-100 series of ac/dc switching power supplies offers up to 103.2 watts of output power in a 7.64? x 3.90? x 1.97? enclosed case. all models have a single output and a universal ac input voltage range of 85~264vac. some features include built-in active pfc, output adjustability, and over load, over voltage, and shor t circuit protection. these supplies are rohs compliant and have ul/cul, cb, and ce safety approvals. all models are 100% full load burn-in tested.
rev. b pspdf-100 series up to 103.2 watts single output, active pfc ac/dc switching power supply wall industries, inc. 5 watson brook road exeter, nh 03833 08/01/2011 603-778-2300 www.wallindustries.com fax 603-778-9797 page 2 of 5 specifications: pspdf-100 series all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwise noted. we reserve the right to change specifi cations based on technological advances. input specifications input voltage range 85~264vac (120~370vdc) input frequency 47~63hz ac current 1.7a max. at 115vac; 0.8a max. at 230vac inrush current 50a typ. at 230vac cold start power factor pf > 0.98 typ. at 115vac; pf > 0.93 typ. at 230vac output specifications output voltage see table voltage accuracy 5v, 12v, & 15v output models: 2.0% 24v & 48v output models: 1.0% voltage adjustment range see table line regulation 0.5% load regulation 5v output model: 1.0% 12v, 15v, 24v, & 48v output models: 0.5% output current see table ripple & noise (see note 1) see table setup time < 2.0s at 230vac and full load hold up time > 20ms at 230vac and full load temperature coefficient 0.03%/c overshoot and undershoot < 5.0% protection over load protection 105% ~ 150% of rated output power, hiccup mode, auto-recovery over voltage protection 110% ~ 150% of rated output voltage, shutdown short circuit protection long-term mode, auto-recovery general specifications efficiency (typical) see table primary to secondary 3000vac; 10ma primary to pg 1500vac; 10ma withstand voltage secondary to pg 500vdc; 10ma isolation resistance 100m ? input to output < 0.25ma leakage current input to pg < 3.5ma environmental specifications operating ambient temperature -10c to +60c storage temperature -20c to +85c working humidity 20 ~ 90% rh (non-condensing) storage humidity 10 ~ 95% rh (non-condensing) cooling method free air convection mtbf (mil-hdbk-217f) > 100,000 hours @ 25c and full load physical specifications dimensions (l x w x h) 7.64 x 3.90 x 1.97 inches (194 x 99 x 50 mm) packing 20pcs/ctn, 15.2kgs, 0.053cbm safety & emc (see note 2) safety standards ul60950-1, en60950-1: 2006 emi conduction and radiation compliance to en55022 (cispr22) class b harmonic current compliance to en61000-3-2, 17625.1-2003 ems immunity compliance to en61000-4-2,3,4,5,6,8,11; env50204, light industry level, criteria a
rev. b pspdf-100 series up to 103.2 watts single output, active pfc ac/dc switching power supply wall industries, inc. 5 watson brook road exeter, nh 03833 08/01/2011 603-778-2300 www.wallindustries.com fax 603-778-9797 page 3 of 5 model selection table efficiency (typ) model number input voltage output voltage output current voltage adj. range ripple & noise (1) output power 120vac 230vac pspdf-100-5 5 vdc 20a 4.0 ~ 5.9 vdc 100mvp-p 100w 78% 80% pspdf-100-12 12 vdc 8.5a 10 ~ 14 vdc 100mvp-p 102w 83% 85% PSPDF-100-15 15 vdc 6.7a 13.5 ~ 17.0 vdc 100mvp-p 100.5w 83% 85% pspdf-100-24 24 vdc 4.2a 20 ~ 28 vdc 150mvp-p 100.8w 83% 86% pspdf-100-48 85~264 vac (120~370 vdc) 48 vdc 2.15a 43 ~ 55 vdc 250mvp-p 103.2w 84% 87% notes 1. ripple & noise is measured at 20mhz bandwidth by using a 12" twisted pair-wire terminated with 0.1 f and 47 f capacitors in parallel. 2. the sps is considered a component which will be installe d into final equipment. the final equipment must be re-confirmed that it still meets emc directives. block diagram +v v i/p fg _ emi filter & rectifiers pfc circuit power switching o.l.p. pwm & pfc control feedback detection circuit rectifiers & filter o.v.p. derating curve ambient temperature (c) load (%) input voltage (vac) 60hz load (v) 5v model 12v, 15v, 24v, & 48v models 5v models (with 18cfm fan)
rev. b pspdf-100 series up to 103.2 watts single output, active pfc ac/dc switching power supply wall industries, inc. 5 watson brook road exeter, nh 03833 08/01/2011 603-778-2300 www.wallindustries.com fax 603-778-9797 page 4 of 5 mechanical drawing 0.55 (14) 0.26 (6.5) 0.41 (10.5) 2.72 (69.18) 1.00 (25.5) 2.09 (53) 6.40 (162.5) 7.05 (179) 1.38 (35) 2 - m4 0.375 (9.525) 0.316 (8.025) led v adj +v +v -v -v n l 6 - m3 1.67 (42.5) 3.29 (83.5) 1.65 (42) 0.26 (6.5) 3.39 (86) 1.95 (49.5) 3.90 (99) ? 0.18 (? 4.5) 3 - m4 0.20 (5) 3.94 (100) 0.39 (10) 0.98 (25) 6.63 (168.5) 1.48 (37.5) 0.89 (22.5) 0.37 (9.5) 0.59 (15) 0.89 (22.5) 0.18 (4.5) 1.97 (50) 7.05 (179) 2 - m4 1.67 (42.5) 3.29 (83.5) 1.95 (49.5) 3.90 (99) 1.97 (50) 0.89 (22.5) 0.18 (4.5) 3 - m4 ? 0.18 (? 4.5) 0.20 (5) 0.89 (22.5) 1.48 (37.5) 6.63 (168.5) 0.98 (25) 0.3 (10) terminal block m3.5 screws 7x unit: inches (mm)
rev. b pspdf-100 series up to 103.2 watts single output, active pfc ac/dc switching power supply wall industries, inc. 5 watson brook road exeter, nh 03833 08/01/2011 603-778-2300 www.wallindustries.com fax 603-778-9797 page 5 of 5 company information wall industries, inc. has created custom and modified units for over 50 years. our in-house research and development engineers will provide a solution that exceeds your perfo rmance requirements on-time and on budget. our iso9001-2008 certification is just one example of our commitment to produc ing a high quality, well-documented product for our customers. our past projects demonstrate our commitment to you, our cu stomer. wall industries, inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and f unction requirements. we will continue to provide ongoing support for your project a bove and beyond the design and production phases. give us a call today to discuss your future projects. contact wall industries for further information: phone : ? (603)778-2300 toll free : ? (888)597-9255 fax : ? (603)778-9797 e-mail : sales@wallindustries.com web : www.wallindustries.com address : 5 watson brook rd. exeter, nh 03833
|
