isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 500sdp1s1m7qea 2:1 10/12/2009 T521012 e blr 1 1 4 5 6 1 2 3 p.c. mounting c 16919 revised and redrawn 1/25/07 tn pos. 1 pos. 2 pos. 3 switch function none on on 2-1, 5-4 n/a 2-3, 5-6 2 13 12.70 [.500 in] 4.72 [.186 in] 3.86 [.152 in] sq. 4.45 [.175 in] 11.43 [.450 in] 12.70 [.500 in] 3.81 [.150 in] .36 [.014 in] .76 [.030 in] 4.83 [.190 in] 1.27 [.050 in] 3.18 [.125 in] 1.22 [.048 in] 5 46 circuit: dpdt note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. contact rating: 5a @120vac or 28vdc, 2a @250vac 6. electric life: 30,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. contact resistatnce: 10 m-ohms typ. 12. 2002/95/ec (rohs) compliant 4 5 6 4 1 2.69 [.106 in] epoxy seal 6.10 [.240 in] 2.16 [.085 in] d 18678 revised logo location note 10/12/09 blr e-switch logo on opposite side d e 19570 drawing update / clean-up 1/7/11 bgl e 4.83 [.190 in] 3.81 [.150 in] 3.81 [.150 in] 4.45 [.175 in] n 1.85 [.073 in] 12.70 [.500 in]
|