technical data sheet 1/3 right angle plug crimp type r114.187.000 cable 2.6/50+75 s series : smb issue : 0216 b in the effort to improve our products, we reserve the right to make changes judged to be necessary. all dimensions are in mm. .. pn ao components body center contact outer contact insulator gasket others parts - - materials brass beryllium copper beryllium copper ptfe - brass - - platings ( m) gold 0.2 over nickel 2 gold 1.3 over nickel 2 gold 0.5 over nickel 2 gold 0.2 over nickel 2 - -
technical data sheet 2/3 right angle plug crimp type r114.187.000 cable 2.6/50+75 s series : smb issue : 0216 b in the effort to improve our products, we reserve the right to make changes judged to be necessary. packaging standard unit o ther 100 ?w? option contact us electrical characteristics impedance 50 ? frequency 0-4 ghz vswr 1.35 + 0.040 x f(ghz) maxi insertion loss 0.5 f(ghz) db maxi rf leakage - ( 57 - f(ghz)) db mini voltage rating 335 veff maxi dielectric withstanding voltage 1000 veff mini insulation resistance 1000 m ? mini mechanical characteristics center contact retention axial force ? mating end 10 nmini axial force ? opposite end 10 nmini torque na n.cm mini recommended torque mating na n.cm panel nut na n.cm clamp nut na n.cm a/f clamp nut 0.000 mm mating life 500 cycles mini weight 3.570 g environmental operating temperature -65/+165 c hermetic seal na atm.cm3/s panel leakage na specification cable assembly stripping abcdef m m 3.50 8.00 16.0 0.00 12.5 0.00 assembly instruction : recommended cable(s) rg 316 rg 188 rg 179 rg 187 kx 22a cable retention - pull off 110 nmini - torque na n.cm tooling part number description hexagon .. . r282.211.000 crimping tool 3.25 r282.235.003 crimping dies 3.25 r282.281.000 crimping tool 2x4 (pos. 2) r282.293.000 crimping tool - r282.983.000 positoner for crimping tool - others characteristics -
technical data sheet 3/3 right angle plug crimp type r114.187.000 cable 2.6/50+75 s series : smb issue : 0216 b in the effort to improve our products, we reserve the right to make changes judged to be necessary. components stripping dimensions body1 insulator centre contact body2 ferrule e a c b 1 2 mount the ferrule. strip off the cable -push the cable into the body1 of the connector the jasket must be against the sleeve. -mount the insulator . -crimp the centre contact against the insulator with crimping tool. -remove the cable to put the insulator abutment the body2 -crimp the ferrule with crimping tool. -mount the front insulator on the centre contact. -screw the body1 into the cable assembly.
|
