View TGC4510-SM_8131473.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 1 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com applications 28 - pin 5 x 5 mm qfn package ? ? point - to - point radio ? millimeter wave communications product features functional block diagram ? C ? C ? C ? ? ? ? ? ? package dimensions: 5.0 x 5.0 x 1.3 mm general description pin configuration the triquint tgc4 510 - sm is a k - band image reject upconvert er mixer with integrated x2 lo buffer amplifier and output variable gain amplifier. the tgc4510 - sm outputs an rf frequency from 17.7 to 26.5 ghz using if inputs from dc to 4.0 ghz and a corresponding lo frequency. it is designed using triquints phemt production C pin # function label 1,7,8,9,13,14,15,21,22, 27,28 28 gnd 2 rf out 3,11, 19,20,24 nc 4 vctrl 2 5 v ctrl1 6 vg rf 10 if 2 12 if 1 1 6 lo in 17 v dlo1 18 v glo 23 vdlo23 25 vgx 26 vdrf ordering information part no. eccn description tgc 4510 - sm ear99 k band upconverter standard t/r size = 500 pieces on a 7 reel 4510 1201 1066 7 6 5 4 3 2 1 13 10 11 12 16 14 15 8 9 20 18 17 19 21 22 23 24 25 28 26 27 image reject mixer lo doubler x 2 variable gain amplifier rf out vctrl2 vctrl1 vgrf if2 if1 lo in vdlo1 vglo vdrf vdlo23 vgx
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 2 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com specifications absolute maximum ratings parameter rating vdrf, vdlo1, vdlo23 6 v i drf 390 m a idlo1 1 9 0 ma idlo23 300 ma vgrf, vglo, vgx - 3 to +1.5 v vctrl1, vctrl2 - 3 to + 0 v dc voltage at if1, if2 for lo nulling - 2 to +2 v rf input power, lo in, 50, t = ? 50, t = ? ? ? 2 w operation of this device outside the parameter ranges given above may cause permanent damage. recommended operating conditions parameter min typ max unit s operating temp. range - 40 +85 ? - 10 dbm electrical specifications are measured at specified test conditions. specifications are not guaranteed over all recommended operating conditions.
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 3 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com specifications electrical specifications test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo 1+idlo23 = 14 0 to 200 ma , vdrf = 5.0 v , vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v , t = 25 c characteristic impedance: 50 parameter conditions min typ max units rf frequency range 1 7.7 2 6.5 ghz lo frequency range 6.85 1 5.25 ghz if frequency range 0 4 ghz conversion gain full frequency range 17.7 C 23.6 ghz 1/ 9.5 13 13 17.5 db attenuation range 2/ 34 db ssb noise figure 15 db oip3 full frequency range 17.7 C 23.6 ghz 27.5 32 32 dbm iip3 at minimum gain 13 dbm image rejection 15 db lo isolation at rf port 3/ 5/ - 5 db lo isolation at rf port 4/ 5/ 25 db lo return loss 12 db rf return loss 11 db 1 / m aximum gain, vctl1 = - 2 v, vctl2 = 0 v 2 / m aximum gain at vctl1 = - 2 v, vctl2 = 0 v ; min imum gain at v ctl1 = 0 v, vctl2 = - 2 v 3 / w ithout e xternal lo n ulling voltage 4 / w ith e xternal lo n ulling v oltage 5 / lo isolation = (input power at lo port at lo frequency) C (output power at rf port at 2xlo frequency )
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 4 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com specifications thermal and reliability information parameter conditions rating thermal resistance, jc , measured to back of package tbase = 85 c jc = 19.6 c/w channel temperature (tch), and median lifetime (tm) tbase = 85 c, v dlo = 3.0 v, idlo=260 ma, vdrf = 5.0 v, idrf= 36 0 ma pdiss = 2.6 w tch = 136 c tm = 5.2 e +0 6 hours 1.0e+04 1.0e+05 1 . 0 e+ 06 1.0e+07 1.0e+08 1.0e+09 1.0e+10 1.0e+11 1.0e+12 1.0e+13 1.0e+14 1.0e+15 25 50 75 100 125 150 175 200 median lifetime, tm (hours) channel temperature, tch ( c) median lifetime (tm) vs. channel temperature (tch) fet 5
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 5 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance unless noted, bias conditions for all measurements : vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo 1+idlo23 = 14 0 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma; vgx = - 1.2 v unless noted, all measurements with if input power = - 10 dbm, external if hybri d and no lo nulling at 25 c lower side band frequenc y ranges if freq ghz lo freq ghz rf freq ghz 0.5 9 - 14 17.5 - 27.5 1.0 9 - 14 17 - 27 2.0 9 - 14 16 - 26 3.0 10 - 15 17 - 27 3.3 10 - 15.5 16.7 - 27.7 4.0 10 - 16 16 - 28 upper side band frequency ranges if freq ghz lo freq ghz rf freq ghz 0.5 8 - 14 16.5 - 28.5 1.0 8 - 13 17 - 28 2.0 7 - 13 16 - 28 3.0 6.5 - 12 16 - 27 3.3 6.5 - 12 16.3 - 27.3 4.0 6.5 - 11 17 - 26 state vct r l1 v vct r l2 v max gain - 2 0 reduced gain - 1.0 - 1.0 min gain 0 - 2
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 6 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v, temp = + 25 c . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . 0 2 4 6 8 10 12 14 16 18 20 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) lsb conversion gain vs. rf vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 2 4 6 8 10 12 14 16 18 20 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) usb conversion gain vs. rf vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm -10 -8 -6 -4 -2 0 2 4 6 8 10 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) lsb conversion gain vs. rf vs. if and lo power state: reduced gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm -10 -8 -6 -4 -2 0 2 4 6 8 10 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) usb conversion gain vs. rf vs. if and lo power state: reduced gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm -30 -28 -26 -24 -22 -20 -18 -16 -14 -12 -10 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) lsb conversion gain vs. rf vs. if and lo power state: min gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm -30 -28 -26 -24 -22 -20 -18 -16 -14 -12 -10 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) usb conversion gain vs. rf vs. if and lo power state: min gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 7 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v, temp = + 25 c . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . 10 15 20 25 30 35 40 17 18 19 20 21 22 23 24 25 26 27 attenuation (db) rf frequency (ghz) lsb attenuation vs. rf vs. if and lo power min to max gain state if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 10 15 20 25 30 35 40 17 18 19 20 21 22 23 24 25 26 27 attenuation (db) rf frequency (ghz) usb attenuation vs. rf vs. if and lo power min to max gain state if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) lsb image rejection vs. rf vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) usb image rejection vs. rf vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) lsb image rejection vs. rf vs. if and lo power state: reduced gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) usb image rejection vs. rf vs. if and lo power state: reduced gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 8 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com t ypical performance test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v, temp = + 25 c . data taken with external if hybrid and lo nulling applied . ch aracteristic impedance: 50 . 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) lsb image rejection vs. rf vs. if and lo power state: min gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) usb image rejection vs. rf vs. if and lo power state: min gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 output 1db compression (dbm) rf frequency (ghz) lsb output p1db vs. rf vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 output 1db compression (dbm) rf frequency (ghz) usb output p1db vs. rf vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 35 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) lsb output ip3 vs. rf vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 35 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) usb output ip3 vs. rf vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 9 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v, temp = + 25 c . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . 0 5 10 15 20 25 30 35 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) lsb output ip3 vs. rf vs. if and lo power state: reduced gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 35 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) usb output ip3 vs. rf vs. if and lo power state: reduced gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm -25 -20 -15 -10 -5 0 5 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) lsb output ip3 vs. rf vs. if and lo power state: min gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm -25 -20 -15 -10 -5 0 5 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) usb output ip3 vs. rf vs. if and lo power state: min gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 10 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v, temp = + 25 c . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . -10 0 10 20 30 40 50 60 70 80 90 100 9 10 11 12 13 14 15 16 isolation (db) lo frequency (ghz) lsb lo - to - rf isolation vs. lo freq vs. lo power and state max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm 0 10 20 30 40 50 60 70 80 90 100 6 7 8 9 10 11 12 13 14 isolation (db) lo frequency (ghz) usb lo - to - rf isolation vs. lo freq vs. lo power and state max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm 0 10 20 30 40 50 60 70 80 90 100 9 10 11 12 13 14 15 16 isolation (db) lo frequency (ghz) lsb lo - to - if isolation vs. lo freq vs. lo power and state max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm 0 10 20 30 40 50 60 70 80 90 100 6 7 8 9 10 11 12 13 14 isolation (db) lo frequency (ghz) usb lo - to - if isolation vs. lo freq vs. lo power and state max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm 0 10 20 30 40 50 60 70 80 90 100 9 10 11 12 13 14 15 16 isolation (db) lo frequency (ghz) lsb if - to - rf isolation vs. lo freq vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 10 20 30 40 50 60 70 80 90 100 6 7 8 9 10 11 12 13 14 isolation (db) lo frequency (ghz) usb if - to - rf isolation vs. lo freq vs. if and lo power state: max gain if freq 1.0 ghz if freq 2.0 ghz if freq 3 .3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 11 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v, temp = + 25 c . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . -80 -70 -60 -50 -40 -30 -20 -10 0 9 10 11 12 13 14 15 16 2lo - to - rf leakage (dbm) lo frequency (ghz) lsb 2lo - to - rf leakage vs. lo freq vs. lo power and state max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm -80 -70 -60 -50 -40 -30 -20 -10 0 6 7 8 9 10 11 12 13 14 2lo - to - rf leakage (dbm) lo frequency (ghz) usb 2lo - to - rf leakage vs. lo freq vs. lo power and state max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm -80 -70 -60 -50 -40 -30 -20 -10 0 9 10 11 12 13 14 15 16 2lo - to - if leakage (dbm) lo frequency (ghz) lsb 2lo - to - if leakage vs. lo freq vs. lo power and state max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm -80 -70 -60 -50 -40 -30 -20 -10 0 6 7 8 9 10 11 12 13 14 2lo - to - if leakage (dbm) lo frequency (ghz) usb 2lo - to - if leakage vs. lo freq vs. lo power and state max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm 0 10 20 30 40 50 60 70 80 90 100 17 18 19 20 21 22 23 24 25 26 27 rf - to - if isolation (db) rf frequency (ghz) rf - to - if isolation vs. rf freq vs. lo power and state if1 port, without external if hybrid max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm 0 10 20 30 40 50 60 70 80 90 100 17 18 19 20 21 22 23 24 25 26 27 rf - to - if isolation (db) rf frequency (ghz) rf - to - if isolation vs. rf freq vs. lo power and state if2 port, without external if hybrid max gain reduced gain min gain lo 3 dbm lo 6 dbm lo 9 dbm
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 12 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance return loss test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v, temp = + 25 c . data taken with external if hybrid and lo nulling applied . ch aracteristic impedance: 50 . 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 rf frequency (ghz) return loss (db) state: max gain lsb rf return loss vs. if and lo power if freq 0.5 ghz if freq 1.0 ghz if freq 2.0 ghz if freq 3.3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 rf frequency (ghz) return loss (db) state: max gain usb rf return loss vs. rf vs. if and lo power if freq 0.5 ghz if freq 1.0 ghz if freq 2.0 ghz if freq 3.3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 rf frequency (ghz) return loss (db) state: min gain lsb rf return loss vs. rf vs. if and lo power if freq 0.5 ghz if freq 1.0 ghz if freq 2.0 ghz if freq 3.3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 rf frequency (ghz) return loss (db) state: min gain usb rf return loss vs. rf vs. if and lo power if freq 0.5 ghz if freq 1.0 ghz if freq 2.0 ghz if freq 3.3 ghz if freq 4.0 ghz lo 3 dbm lo 6 dbm lo 9 dbm 0 10 20 30 40 6 8 10 12 14 16 lo 3 dbm lo 6 dbm lo 9 dbm lo return loss vs. frequency and lo power return loss (db) lo frequency (ghz)
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 13 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance C external lo nulling test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v , temp = + 25 c . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . -30 -20 -10 0 10 20 30 40 12 14 16 18 20 22 24 26 28 30 2 lo to rf leakage (dbm) 2 lo frequency (ghz) 2 lo to rf leakage without external lo nulling voltages state: max gain lo = 2.0 dbm lo = 9.0 dbm -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 12 14 16 18 20 22 24 26 28 30 2 lo to rf leakage (dbm) 2 lo frequency (ghz) 2 lo to rf leakage with external lo nulling voltages state: max gain lo = 2.0 dbm lo = 9.0 dbm -1.5 -1 -0.5 0 0.5 1 1.5 9 10 11 12 13 14 15 16 voltage (v) lo frequency (ghz) lsb lo nulling voltage vs. lo frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz vi @ - 40 c vi @ +25 c vi @ +85 c vq @ - 40 c vq @ +25 c vq @ +85 c -1.5 -1 -0.5 0 0.5 1 1.5 6 7 8 9 10 11 12 13 14 voltage (v) lo frequency (ghz) usb lo nulling voltage vs. lo frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz vi @ - 40 c vi @ +25 c vi @ +85 c vq @ - 40 c vq @ +25 c vq @ +85 c -15 -10 -5 0 5 10 15 20 9 10 11 12 13 14 15 16 current (ma) lo frequency (ghz) lsb current for lo nulling voltage vs. lo frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz ii @ - 40 c ii @ +25 c ii @ +85 c iq @ - 40 c iq @ +25 c iq @ +85 c -15 -10 -5 0 5 10 15 20 6 7 8 9 10 11 12 13 14 current (ma) lo frequency (ghz) usb current for lo nulling voltage vs. lo frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz ii @ - 40 c ii @ +25 c ii @ +85 c iq @ - 40 c iq @ +25 c iq @ +85 c
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 14 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance C conversion gain vs. temperature test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . 0 2 4 6 8 10 12 14 16 18 20 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) lsb conversion gain vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 1 ghz - 40 c +25 c +85 c 0 2 4 6 8 10 12 14 16 18 20 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) usb conversion gain vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 1 ghz - 40 c +25 c +85 c 0 2 4 6 8 10 12 14 16 18 20 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) lsb conversion gain vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 2 ghz - 40 c +25 c +85 c 0 2 4 6 8 10 12 14 16 18 20 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) usb conversion gain vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 2 ghz - 40 c +25 c +85 c 0 2 4 6 8 10 12 14 16 18 20 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) lsb conversion gain vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz - 40 c +25 c +85 c 0 2 4 6 8 10 12 14 16 18 20 17 18 19 20 21 22 23 24 25 26 27 conversion gain (db) rf frequency (ghz) usb conversion gain vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz - 40 c +25 c +85 c
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 15 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance C image rejection vs. temperature test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) lsb image rejection vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 1 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) usb image rejection vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 1 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection(db) rf frequency (ghz) lsb image rejection vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 2 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) usb image rejection vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 2 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection(db) rf frequency (ghz) lsb image rejection vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 35 40 45 50 17 18 19 20 21 22 23 24 25 26 27 image rejection (db) rf frequency (ghz) usb image rejection vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz - 40 c +25 c +85 c
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 16 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance C 1db compression vs. temperature test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v . data taken with external if hybrid and lo nulling applied . characteristic imp edance: 50 . 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 output 1db compression (dbm) rf frequency (ghz) lsb output p1db vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 1 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 output 1db compression (dbm) rf frequency (ghz) usb output p1db vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 1 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 output 1db compression (dbm) rf frequency (ghz) lsb output p1db vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 2 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 output 1db compression (dbm) rf frequency (ghz) usb output p1db vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 2 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 output 1db compression (dbm) rf frequency (ghz) lsb output p1db vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz - 40 c +25 c +85 c 0 5 10 15 20 25 30 17 18 19 20 21 22 23 24 25 26 27 output 1db compression (dbm) rf frequency (ghz) usb output p1db vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz - 40 c +25 c +85 c
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 17 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance C out put ip3 vs. temperature test conditions unless otherwise noted: vdlo1, vdlo23 = 3.3 v, vglo = - 1.2 v, idlo1+idlo23 = 140 to 200 ma, vdrf = 5.0 v, vgrf = - 0.75 v, idrf = 340 to 380 ma, vgx = - 1.2 v . data taken with external if hybrid and lo nulling applied . characteristic impedance: 50 . 20 22 24 26 28 30 32 34 36 38 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) lsb output ip3 vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 1 ghz - 40 c +25 c +85 c 20 22 24 26 28 30 32 34 36 38 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) usb output ip3 vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 1 ghz - 40 c +25 c +85 c 20 22 24 26 28 30 32 34 36 38 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) lsb output ip3 vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 2 ghz - 40 c +25 c +85 c 20 22 24 26 28 30 32 34 36 38 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) usb output ip3 vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 2 ghz - 40 c +25 c +85 c 20 22 24 26 28 30 32 34 36 38 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) lsb output ip3 vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz - 40 c +25 c +85 c 20 22 24 26 28 30 32 34 36 38 40 17 18 19 20 21 22 23 24 25 26 27 output ip3 (dbm) rf frequency (ghz) usb output ip3 vs. rf frequency vs. temperature state: max gain; lo power = 6 dbm, if = 3.3 ghz - 40 c +25 c +85 c
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 18 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance - spur tables, if 2.0 ghz spur tables spur tables are n ? f i f C m ? f lo mixer spurious products for - 10 dbm i f input power. r f is at 1 i f x 2lo . all values in dbc below the rf output power level . m x n spurious outputs for lsb, if = 2.0 ghz lo = 9 C 13 ghz, 3 C 9 dbm, 25 c m x f lo 0 1 2 3 4 5 n - 5 -- 86 79 70 60 63 - 4 -- 85 76 74 63 61 - 3 -- 84 77 70 59 60 - 2 -- 82 74 66 64 61 - 1 -- 81 0 63 58 61 0 -- 12 19 4 33 53 1 89 75 12 63 57 60 2 83 75 73 61 61 57 3 82 74 67 60 60 -- 4 79 76 69 63 60 -- 5 84 77 67 59 58 -- m x n spurious outputs for usb, if = 2.0 ghz lo = 8 C 12 ghz, 3 C 9 dbm, 25 c m x f lo 0 1 2 3 4 5 n - 5 -- 89 77 76 65 62 - 4 -- 88 76 78 65 62 - 3 -- 88 79 73 64 64 - 2 -- 84 68 72 61 62 - 1 -- 76 14 53 54 65 0 -- 26 - 13 6 32 55 1 69 59 0 42 61 63 2 88 77 66 61 63 64 3 85 79 74 64 59 66 4 85 79 71 66 65 65 5 85 79 69 62 63 61
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 19 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com typical performance - spur tables, if 3.3 ghz spur tables spur tables are n ? f i f C m ? f lo mixer spurious products for - 10 dbm i f input power. r f is at 1 i f x 2lo . all values in dbc below the rf output power level . m x n spurious outputs for lsb, if = 3.3 ghz lo = 10 C 15 ghz, 3 C 9 dbm, 25 c m x f lo 0 1 2 3 4 5 n - 5 -- 84 80 73 64 62 - 4 -- 86 79 68 61 64 - 3 -- 87 78 70 64 61 - 2 -- 83 71 63 61 66 - 1 -- 49 0 38 63 65 0 -- - 3 20 27 37 53 1 75 37 11 61 62 -- 2 84 77 64 63 63 -- 3 83 75 62 60 58 -- 4 79 74 59 60 -- -- 5 76 69 62 64 -- -- m x n spurious outputs for usb, if = 3.3 ghz lo = 11 C 15.5 ghz, 3 C 9 dbm, 25 c m x f lo 0 1 2 3 4 5 n - 5 -- 84 87 77 74 61 - 4 -- 85 82 77 74 66 - 3 -- 88 79 79 69 63 - 2 -- 86 72 74 55 63 - 1 -- 78 10 43 21 51 0 -- 25 - 14 1 - 24 49 1 59 52 0 35 33 63 2 86 77 60 64 63 62 3 85 78 69 63 61 62 4 80 78 68 61 61 61 5 77 71 62 60 63 60
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 20 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com pin description pin symbol description 9,13,27 gnd these pins are tied to pad 29 gnd internally. 2 rf out rf i nput, matched to 50 ohms 3,11, 19,20,24 nc no internal connection; can be grounded on pcb or left open 4 vctrl 2 variable gain control for rf amplifier 5 v ctrl1 variable gain control for rf amplifier 6 vg rf gate v oltage for rf amplifier 10 if 2 if input for upconverter 12 if 1 if input for upconverter 1 6 lo in lo i nput for upconverter . 17 v dlo1 drain v oltage for the first stage of the lo d oubler 18 v glo gate bias for vdlo1 and vdlo23 . 23 vdlo23 drain v oltage for stages 2 and 3 of lo d oubler 25 vgx mixer bias voltage 26 vdrf drain v oltage for the rf amplifier 3,11, 19,20,24 n/c no internal connection; can be grounded on pcb or left open 1,7,8,14,15,21, 22, 28,29 gnd backside p addle. multiple vias should be employed to minimize inductance and thermal resistance; see pcb pattern 6 7 5 3 4 2 1 9 8 10 12 11 14 13 17 15 16 21 19 18 20 27 28 26 25 24 22 23 29
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 21 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com application circuit note a: 50 microstrip transmission line bias - up procedure bias - down procedure set v gx to - 1.2 v set v dlo1, vd lo23 , vdrf to 0 v set v ctrl1 to - 2.0 v set vi , vq to 0 v; if used for lo suppression set v ctrl2 to 0.0 v set v g lo , vgrf, vgx to 0 v set v g lo to - 1.2 v set v ctrl1, vctrl2 to 0 v set v d lo1 and vdlo23 to 3.3 v set v g rf to - 1.2 v set v d rf to 5.0 v adjust v g rf from - 1.2 v towards - 0.2 v until current drawn by vdrf is 345.0 ma if using external bias voltages for lo nulling, adjust vi, vq to final value for maximum lo suppression. see performance charts on page 13 typical performance C external lo nulling for typical voltages c20 1 uf c15 0.01 uf c9 100 pf 27 vctrl1 5 c23 10 uf x1 r4 50 ohm c1 100 pf 'a' 'b' c2 100 pf vgrf see note a r2 0 ohm usb if input vi c10 0.01 uf 8 c21 2.2 uf 7 6 rf out vctrl2 c4 100 pf see note a c3 100 pf 2 4 3 1 28 c16 1 uf c5 100 pf vdlo1 17 lo in lsb if input x1 see note a r1 0 ohm r3 50 ohm c2 100 pf 12 10 11 9 'a' l1 15 nh c1 100 pf 13 14 'b' l2 15 nh c22 2.2 uf see note a c11 0.01 uf vq 15 16 r6 0 ohm 24 26 25 23 22 c19 1 uf c14 0.01 uf c8 100 pf c18 1 uf c13 0.01 uf c7 100 pf c12 0.01 uf 20 c6 100 pf 18 19 21 c17 1 uf r5 0 ohm vdlo23 vglo lo doubler x 2 variable gain amplifer image reject mixer
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 22 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com application circuit pc board layout single core layer board using 0.0 08 thick rogers ro4003, ?r = 3.38. metal layers are 0.5 . c1 c2 c3 c4 c5 c6 c7 c8 c9 c10 c11 c12 c13 c14 c15 c16 c17 c18 c20 c21 c22 c23 c19 l1 l2 r1 r2 r4 r3 x1 r5 r6 q1
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 23 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com bill of material ref des value description manufacture r part number u 1 ku band upconverter triquint tgc4510 - sm x1 case fv1206 - 1 1350 - 2450mhz quadrature hybrid minicircuits qcn25+ c1, c1 10 pf cap, 0402, 50 v, 5%, c0g smd c 3 thru c9 100 pf cap, 0402, 50 v, 5%, c0g smd various c10 thru c15 .01 f cap, 0603, 25 v, 10%, x5r smd various c 16 thru c20 1.0 f cap, 0 805 , 25 v, 10%, x5r smd various c21, c22 2.2 f cap, 0 805 , 25 v, 10%, x5r smd various c23 2.2 f cap, 0 805 , 25 v, 10%, x5r smd various r1 1 / 0
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 24 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com mechanical information package marking and dimensions all dimensions are in millimeters. this package is lead - free/rohs - compliant with a copper alloy base (cda194), and the plating material on the leads is nipdau. it is compatible with lead - free (maximum 260 c reflow temperature) soldering processes. the tgc4 510 - sm will be marked with the 4 510 designator and a lot code marked below the part designator. the yy represents the last two digits of the year the part was manufactured, the ww is the work week, and the xxxx is an auto - generated number a a 4510 yyww xxxx
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 25 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com mechanical information pcb mounting pattern notes: 1. the pad pattern shown has been developed and tested for optimized assembly at triquint semiconductor. the pcb land pattern has been developed to accommodate lead and package tolerances. since surface mount processes vary from company to company, careful process development is recommended. 2. ground vias are critical for the proper performance of this device. vias should use a .35mm (#80 / .0135) diameter drill and have a final plated thru diameter of .25 mm (.010). 2 3 4 5 6 9 10 11 12 13 19 17 16 18 20 25 27 26 23 24
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 26 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com tape and reel information tape and reel specifications for this part are also available on the triquint website in the application notes section. standard t/r size = 500 pieces on a 7 reel. carrier and cover tape dimensions part feature symbol size (in) size (mm) cavity length a0 0. 20 9 5. 3 width b0 0. 20 9 5. 3 depth k0 0.0 64 1. 65 pitch p1 0. 315 8.00 cover tape width c 0. 3 62 9. 2 carrier tape width w 0. 472 12.00 vendor: tek - pak p/n qfn0500x0500f - l500
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 27 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com product compliance information esd information esd rating: 1 a value: passes ? 250 v and < 300 v min. test: human body model (hbm) standard: jedec standard jesd22 - a114 solderability compatible with lead - free soldering processes, 260 maximum reflow temperature. package lead plating: nipdau the use of no - clean solder to avoid washing after soldering is recommended. this package is not compatible with solder containing lead . rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: lead free halogen free (chlorine, bromine) antimony free tbbp - a (c 15 h 12 br 4 0 2 ) free pfos free svhc free msl rating moisture sensitivity level (msl) 1 at 260c convection reflow per jedec standard ipc/jedec j - std - 020. recommended soldering temperature profile
t gc4510 - sm k band upconverter data sheet: rev e 09/11/14 - 28 of 28 - disclaimer: subject to change without notice ? 2014 triquint www.triquint.com contact information for the latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1. 972 . 994 . 8465 email: info - sales@tqs.com fax: +1. 972 . 994 .8 504 for technical questions and application information: email: info - networks@tqs.com importa nt notice the information contained herein is believed to be reliable. triquint makes no warranties regarding the information contain ed herein. triquint assumes no responsibility or liability whatsoever for any of the information contained herein. triquint assumes no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirel y with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such in formation does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not w arranted or authorized for use as critical components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.

▲Up To Search▲

Price & Availability of TGC4510-SM

	To Download TGC4510-SM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .