6.5 0.256 3 1 2 4 1.5 0.059 (4 plcs) 0.2 0.5 0.957 24.3 6.0 0.236 0.5 36.0 1.417 14.0 0.551 10.8 0.425 scale: 1:2 7.8 0.307 0.472 12.0 0.394 10.0 1.0 50.0 1.969 19.5 0.768 specified metal sleeve brass abs a material spring inner hood strain relief plating pvc brass 0.2mm unless otherwise tolerance: nickel clamp life: 5,000 cycles abs steel voltage withstand: 250v ac r.m.s. for 1 minute insulation resistance: 50m ohms min: 250v dc rating: 20v dc @ 7.5a specifications: website: www.cui.com rohs nickel metal cover brass plastic ring pom silver brass/pbt pin/body nickel 20050 sw 112th ave. tualatin, or 97062 phone: 503-612-2300 800-275-4899 fax: 503-612-2383 outer hood 2:1 4-pin power din plug copyright 2008 by cui inc. title: mm [inches] scale: PDP-40 pc file name: approved by: drawn by: units: part no. PDP-40 zrj rev: rev. description date a new drawing 12/1/2008
8 1 2 3 6 4 5 7 9 a scale: 4-pin power din plug copyright 2008 by cui inc. title: mm [inches] zrj PDP-40 pc file name: approved by: drawn by: units: part no. spring 1:1 PDP-40 rev: 1 2 3 4 5 9 8 7 6 outer hood metal sleeve clamp pin body plastic ring strain relief inner hood metal cover
8 7 9 4 2 5 4 step 1 insert strain relief ( 9 ), inner hood ( 8 ), and spring ( 7 ) onto cable step 2 solder wires to contacts on pin body ( 4 ) step 3 push pin body ( 4 ) and plastic ring ( 5 ) into metal sleeve ( 2 ) a 4-pin power din plug copyright 2008 by cui inc. title: mm [inches] scale: PDP-40 pc file name: approved by: drawn by: units: part no. zrj 1:1 PDP-40 rev:
1 8 9 5 7 8 9 a 4-pin power din plug copyright 2008 by cui inc. title: mm [inches] scale: PDP-40 pc file name: approved by: drawn by: units: part no. zrj 1:1 PDP-40 rev: 3 6 2 step 6 push outer hood ( 1 ) and inner hood/ strain relief ( 8 , 9 ) together step 4 crimp the clamp ( 3 ) onto wires, assemble metal cover ( 6 ) onto metal sleeve ( 2 ) step 5 push spring ( 7 ) up to plastic ring ( 5 ), assemble inner hood ( 8 ) and strain relief ( 9 ) together
|
