0.10in 2.5mm clearance 0.31in 8.0mm 2x .04in 0.9mm section a-a scale 4 : 1 16mm .63in 4.6mm .20in .18in .39in 10mm 5mm .31in 7.8mm light pipe device layout press fiber optic in 3 clip onto led 1 solder in place as assembled recommended pwb 2 light pipe preparation and sequence of asssembly revisions ecn # rev. description date initials chk'd 388 000 initial release 1/4/12 kh az 404 001 revised per ecr 020612kh01 2/6/12 kh az visual communications company, inc. scale: 5:1 d c b a a b c d 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 any reproduction in part or as 3.2 a whole without the written otherwise specified output power greater than 100mcd. mm general tolerances unless inches .250 .127 .025 .001 .010 .005 .xxx .xx 1 nylon 6/6, black drawing is the sole property of dimension style: inches [mm] .x permission of visual edges .030 max drawn b prohibited. dwg. no. sheet 1 of 1 do not scale drawing size material third angle projection date angle break all corners and sharp hole led approval thr 5 22 1/4/12 khoward finish mount, 5mm through- ul 94-hb proprietary and confidential azanelli 1/2 title: the information contained in this 190 bosstick blvd. suite 101 san marcos, ca 92069 u.s.a 6. rev communications company, inc is phone: (760) 560-1300, fax: (760) 560-1301 email: vccsales@vcclite.com optoelectronics checked see notes 1/10/12 001 notes rohs compliant. 1. ul 94-hb flammability rating. 2. -40 c to 85 c operating temperature. 3. suitable for light pipe with 2.2mm jacket and optical core no greater 4. than 1.5mm. do not wave solder with this device. 5. for best results use only narrow viewing angle non-diffused leds with surface texture: .06in 1.5mm a a jacket trimmed fiber optic 5mm led max 0.04in 1.2mm 1.50.5 0.06in.02 5.3mm .35in .21in 5.8mm 8.9mm .34in 8.6mm .23in .20in 5mm
|
