mini. output current max. output current (note 1) line regulation load regulation rated output current output voltage ripple & noise p-p (note 2) initial setting accuracy (note 3) 0.2a 8a 1% 2% 5a +5v 50mv 5.08v to 5.13v 0a 4a 1% 4% 1.5a +12v 120mv 11.4v to 12.6v 0a 6a 1% 4% 4a +3.3v 50mv 3.10v to 3.50v 0a ---- 1% 4% 1a +5vsb 120mv 4.80v to 5.20v 0a ---- 1% 5% 0.5a -12v 120mv -11.4v to -12.6v specifications MPI-706H 80w ac-dc open frame power supply MPI-706H-a 80w ac-dc open frame power supply ac-dc industrial power supply total output power maximum 80w with 8.6cfm forced air-cooling and 60w convection cooling at 50 o c ambient temperature note: 1) the maximum total combined output power on the +3.3v and +5v rails is 40w 2) measured by a 20mhz bandwidth limited oscilloscope and the each output is connected with a 10uf electrolytic capacitor and a 0.1uf ceramic capacitor 3) the +5v output is set between 5.08v to 5.13v by variable resistor and all output at 60% rated load and the other outputs are checked to be within the accuracy range 4) while input voltage below 100v (90-99v), an accessory heat sink or the chassis of application (min. 440 cm 2 , aluminum with 1.5mm thickness) is recommend to be placed at the bottom of the power supply itself dimensions MPI-706H: 17.0 x 5.2 x 3.9 cm, tolerance +/-0.4mm MPI-706H-a: 18.0 x 5.2 x 3.9 cm, tolerance +/-0.4mm 5.2 2.4 2.1 0.2 17.0 3.9 15.0 c c 3.8 3.4 0.7 0.9 0.9 0.7 #6-32 internal thread stud total 2mm high , x4(c) 1 cn1 l n e cn3 cn5 1 0.5 1.55 1.45 3.4 2.1 18.0 14.55 3.8 3.4 0.7 0.9 0.9 0.7 #6-32 internal thread stud total 2mm high , x4(c) 5.2 0.2 3.9 1 cn l n e cn cn5 1 0.5 1.55
|
