typical applications 4707 dey road liverpool, n.y. 13088 (315) 701-6751 0006 m.s.kennedy corp. features: logic level translator relay driver lamp driver high level digital driver equivalent schematic typical applications description: the msk 0006 is an integrated high voltage, high current driver designed to accept standard dtl or ttl logic levels and drive a load of up to 400 ma at 28v. and inputs are provided along with an expander connection, should additional gating be required. the addition of an external capacitor provides control of the rise and fall times of the output. the device is packaged in a hermetic 10 pin can. pin-out information output response time control c response time control b nc ground vcc input input expander nc 10 9 8 7 6 single supply operation from 20v to 45v replaces nh/dh0006 'and' input logic with expander external transition time control output current to 400ma available to dscc smd 5962-87617 1 2 3 4 5 1 msk0006 mil-prf-38534 and 38535 certified facility 8548-91 rev. d 9/13
power supply range logic 1 input voltage logic 0 input voltage logic 1 output voltage logic 0 output voltage logic 0 input current off supply current on supply current rise time fall time turn on time turn off time thermal resistance storage temperature range lead temperature range (10 seconds) case operating temperature (msk 0006h) (msk 0006) junction temperature absolute maximum ratings 60v 1.5a 5.5v 5ma supply voltage (t 0.1 sec) output current (50ms) input voltage expander input current -65c to +150c 300c -55c to +125c -40c to +85c 175c 1 2 3 4 5 6 7 8 t st t ld t c t j v cc i out v in i in v cc =45v, cf=nc and i out =0ma unless otherwise specified. guaranteed by design but not tested. typical parameters are representative of actual device performance but are for reference o nly. logic input levels are verified during logic output voltage test. industrial grade devices shall be tested to subgroups 1 and 4 unless otherwise requested. military grade devices ("h" suffix) shall be 100% tested to subgroups 1,2,3 and 4. subgroup 5 and 6 testing available upon request. subgroup 1,4 t c =+25c subgroup 2,5 t c =+125c subgroup 3,6 t a =-55c measured from 50% of v in to 90% of v out transition. notes: group a subgroup - 1,2,3 1,2,3 1,2,3 1,2 3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 4,5,6 4,5,6 4,5,6 4,5,6 - continuous 20v v cc 45v 20v v cc 45v v cc =28v v in =2v r l =82 v cc =20v v in =2v r l =82 v cc =20v v in =2.1v r l =82 v in =0.8v r l =100 v in =2.4v v in =5.5v v in =0.4v v in =0.8v v in =2.0v v cc =28v r l =82 v cc =28v r l =82 v cc =28v r l =82 v cc =28v r l =82 junction to case @ t c =125c typ. 28 - - 27 19 19 5 1 25 - 0.5 6 100 0.8 0.3 2.2 60 1 test conditions max. 45 5.5 0.8 - - - 10 5 100 - 2.0 8 300 1.7 1.0 8.0 68 min. 15 2.0 - 26.5 13 13 - - - -1.0 - - - - - - - min. 16 2.0 - 26 13 13 - - - -1.1 - - - - - - - max. 45 5.5 0.8 - - - 15 10 150 - 2.2 8.5 325 1.8 1.1 8.2 70 typ. 28 - - 27 19 19 5 1 25 - 0.5 6 100 0.8 0.3 2.2 60 v v v v v v mv a a ma ma ma ns s s s c/w msk0006h msk0006 parameter electrical specifications 2 units 2 2 2 2 2 8 2 8 2 2 8548-91 rev. d 9/13 logic 1 input current
application notes 3 8548-91 rev. d 9/13
typical performance curves 4 8548-91 rev. d 9/13
mechanical specifications esd triangle indicates pin 1. all dimensions are 0.010 inches unless otherwise labeled. the information contained herein is believed to be accurate at the time of printing. msk reserves the right to make changes to its products or specifications without notice, however, and assumes no liability for the use of its products. please visit our website for the most recent revision of this datasheet. m.s. kennedy corp. 4707 dey road, liverpool, new york 13088 phone (315) 701-6751 fax (315) 701-6752 www.mskennedy.com msk0006 ordering information screening level part number msk0006 msk0006h 5962-87617 industrial mil-prf-38534 class h dscc-smd 5 8548-91 rev. d 9/13 weight=1 gram typical
|
