c.63 for service and technical support, call 866-405-665 4 (outside the u.s. and canada, see catalog back cover). a. system overview b. copper systems c. fiber optic systems d. power over ethernet e. zone cabling f. wireless g. outlets h. media distribution i. physical infrastructure management j. overhead & underfloor routing k. surface raceway l. cabinets, racks & cable management m. grounding & bonding n. industrial o. labeling & identification p. cable management accessories q. index physical infrastructure solutions opti-core ? 10gig 50/125m (om3/om4) patch cords and pigtails ? available in riser (ofnr) or plenum (ofnp) flame r atings; part numbers listed are for ofnr (fxe10-10m1y) ? for ofnp, place a p after the x in the part number and drop the y (fxp e10-10m1) ? patch cords are tested to support network transmis sion speeds up to 10 gb/s for link lengths up to 300 meters with an 850nm source per ieee 802.3ae 10 gbe standard ? pass all tia/eia-568-b.3 performance requirements ? lc and sc connector housing and boot colors follow tia/eia-568-c.3 suggested color identification sche me ? insertion loss per connection: 0.10db typical; 0.30db maximum ? backward compatible for use with all 50/125m system requirements ? factory terminated and 100% tested for insertion l oss ? insertion loss data recorded for every multimode patch cord ? lifetime traceability of test data to a q.c. number on each patch cord ? highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber fzd3-3m* fxb6j-nm*y fxd6p-6pm*y fxf10-10m*y fzb3-nm* fxd6j-nm*y fze10-10m* fzb10-nm* www.panduit.com ? patch cords are tested to support network transmission speeds up to 10 gb/s for link lengths up to 550 meters with an 850nm source per ieee 802.3ae 10 gbe standard ^additional lengths and availability: patch cords ar e available in 1 C 10 meter lengths in 1 meter incre ments, and 15, 20, 25 and 30 meter lengths. pigtails are available in 1, 2 , and 3 meter lengths. to order lengths other than 1 meter, replace the 1 after the m (fxd3-3m1 y) with the desired length (fxd3-3m2 y for 2 meter length). the above lengths are stock i tems. for other lengths, contact customer service for act ual lead times. for optimized om3 or om4 patch cords, add an o aft er the x or z in the part number. (ex: fzoe10-10m) part number part description length (m) ^ std. pkg. qty. std. ctn. qty. lc to lc C 10gig ? om4 multimode duplex patch cords C 1.6mm jacketed cable fze10-10m1 lc to lc patch cord, standard om4, riser, 0.25 db i l loss, duplex, 1.6mm jacketed cable, 1m 1 1 10 lc to pigtail C 10gig ? om4 multimode simplex pigtails C 900m buffered fiber fzb10-nm1 lc to pigtail patch cord, standard om4, riser, 0.25 db il loss, simplex pigtails, 900 buffered fiber, 1m 1 1 10 sc to sc C 10gig ? om4 multimode duplex patch cords C 3mm jacketed cable FZD3-3M1 sc to sc patch cord, standard om4, riser, 0.25 db i l loss, duplex, 3.0mm jacketed cable, 1m 1 1 10 sc to pigtail C 10gig ? om4 multimode simplex pigtails C 900m buffered fiber fzb3-nm1 sc to pigtail patch cord, standard om4, riser, 0.25 db il loss, simplex pigtails, 900 buffered fiber, 1m 1 1 10 sc to lc C 10gig ? om4 multimode duplex patch cords C 1.6mm jacketed cable fze3-10m1 sc to lc patch cord, standard om4, riser, 0.25 db i l loss, duplex, 1.6mm jacketed cable, 1m 1 1 10 lc to lc C 10gig ? om3 multimode duplex patch cords C 1.6mm jacketed cable fxe10-10m1y lc to lc multimode duplex patch cord, 1.6mm jackete d cable (two duplex lc connectors on each end) C 10gig ? 50/125m. 1 1 10 lc to pigtail C 10gig ? om3 multimode simplex pigtails C 900m buffered fiber fxb10-nm1y lc to pigtail multimode simplex pigtail, 900m buff ered fiber (one lc connector on one end and open on the other end) C 10gig ? 50/125m. 1 1 10 sc to sc C 10gig ? om3 multimode duplex patch cords C 3mm jacketed cable fxd3-3m1y sc to sc multimode duplex patch cord, 3mm jacketed cable (one duplex sc connector on each end) C 10gig ? 50/125m. 1 1 10 sc to pigtail C 10gig ? om3 multimode simplex patch cords C 900m buffered fiber fxb3-nm1y sc to pigtail multimode simplex pigtail, 900m buff ered fiber (one sc connector on one end and open on the other end) C 10gig ? 50/125m. 1 1 10 fj ? plug to fj ? plug C 10gig ? om3 multimode duplex patch cords C 3mm jacketed cable fxd6p-6pm1y fj ? plug to fj ? plug multimode duplex patch cord, 3mm jacketed cable (one fj ? plug on each end) C 10gig ? 50/125m. 1 1 10 fj ? jack module to pigtail C 10gig ? om3 multimode duplex patch cords C 3mm jacketed cable fxd6j-nm1y fj ? jack module to pigtail multimode duplex pigtail, 3m m jacketed cable (one fj ? jack module on one end and open on the other end) C 10gig ? 50/125m. 1 1 10 fj ? jack module to pigtail C 10gig ? om3 multimode duplex pigtails C 900m buffered fiber fxb6j-nm1y fj ? jack module to pigtail multimode duplex pigtail, 90 0m buffered fiber (one fj ? jack module on one end and open on the other end) C 10gig ? 50/125m. 1 1 10 table continues next page
|
