86 crystaqÚclock oscillators clk osc lid base sealing terminal terminal plating rohs 32smohg generic part number frequency range standard frequencies (mhz) frequency stability over all conditions operating conditions operating temperature input voltage (v dd ) stand-by control voltage (pin#1) absolute max. ratings supply voltage storage temperature input current (pin#1=open or vih) stand - by current output symmetry rise and fall times "0" level "1" level load disable delay time enable delay time startup time aging (non operation) ssb phase noise reflow condition metal ceramic ausn tungsten (metalized) gold / nickel (surface) / (under) compliant (pb-free) tf t t 90% or 80% v dd 10% or 20% v dd ov dc symmetry=t/t 100(%) 50% v dd tr gnd v oh ("1"level) v ol ("0"level) v dd 3.2 0.1 2.5 0.1 0.9 0.1 0.5 1.3 0.5 0.1 0.1 0.7 1.6 0.5 0.7 #2 ab #1 #3 #5 #6 #4 #5 #6 #4 #2 #1 #3 ? the terminals (a & b) not to be connected. pin 1 connection "l" 2n .c. 4z 3 gnd open or "h" output z : high impedance 6v dd 5n .c. 32smohg output waveform v dc power supply v dd v dd cl n.c. t est point #3 #5 output gnd n.c. #1 #2 #4 #6 0.01 f ? 0.1 f a cl : including fixture and probe capacitance. tri-state test circuit 32smohg 32smohg (+2.8v, +3.0v or +3.3v high stability fixed models) standard smd clock oscillators item specifications standard specifications package item standard specifications package data package item 32smohg t 1 500.000 khz to 45.000 mhz 31.250 mhz, 40.000 mhz, 44.000 mhz 32smohg(e) : ? 20 ppm over - 30?c to 85?c 32smohg(f) : ? 15 ppm over - 30?c to 85?c 32smohg(g) : ? 10 ppm over - 30?c to 85?c 32smohg(ew) : ? 20 ppm over - 40?c to 85?c 32smohg(fw) : ? 15 ppm over - 40?c to 85?c 32smohg(gw) : ? 10 ppm over - 40?c to 85?c - 30?c to 85?c (standard) - 40?c to 85?c (w) 2.8v, 3.0v or 3.3v dc ? 5% v ih : v dd - 0.5v min. v il : 0.5v max. t 2 - 0.3v to 5.5v dc - 40?c to 85?c 10 ma max. 10 a max. (pin#1=v il ) 45% to 55% at 50%v dd level 5 ns max. (10%v dd to 90%v dd level) v ol : 10%v dd max. v oh : 90%v dd min. 15 pf max. (cmos) 100 ns max. 10 ms max. 10 ms max. ? 2 ppm max. at 25?c ? 3?c for first year - 130 dbc/hz max. at 1 khz offset 250?c ? 10?c for 10 seconds 170?c ? 10?c for 1 to 2 minutes (pre-heating) ( t 1) final exact part number to be determined with frequency, frequency stability, operating temperature and input voltage. e.g. 32smohg(3.0vfw) 44.000 mhz. ( t 2) internal crystal oscillation to be halted (pin#1=v il ) high stability 1.0 1.6 2.6 0.8 0.8 1.3 1.0 0.01 f ? 0.1 f soldering pattern a 3.5 2.8 8.0 3.5 4.0 1.0 0.3 1.4 178 1000pcs qty/reel b c d f j l m reel dia. 4.0 0.1 2.0 0.1 1.75 0.1 + 0.1 - 0 1.5 l b f d a c j m t ape specifications actual size
|