omnismart 500va tower line-interactive 120v ups with built-in isolation transformer and usb port model number: OMNI500ISO description tripp lite's OMNI500ISO offers complete ups protection with built-in line-interactive voltage regulation, intelligent monitoring and unattended shutdown capability. built-in isolation transformer with faraday shield offers full isolation and complete common mode noise rejection. 500va power handling capacity supports point-of-sale applications, computers, internetworking equipment and home theater systems during commercial power failures. line-interactive voltage regulation corrects brownouts as low as 83v back to normal 120v levels, saving battery reserves for use only during complete power failures. built-in usb communications port works with poweralert software and cabling to provide automatic unattended shutdown of connected network and pc applications. features 500va line-interactive ups with faraday-shielded, low-impedance isolation transformer delivers full isolation from potential damage and performance problems provides immunity from emi/rfi line noise in both normal and common modes. delivers clean signal-reference ground, reducing data errors and audio/video distortion automatic voltage regulation (avr) automatically corrects incoming voltage to keep equipment working through low voltage (brownouts) as low as 83v, without draining battery power supports loads up to 500va/300w 5.4 min. full-load runtime (300w); 11 min. half load runtime (150w) electrostatic discharge (esd) resistance reduces potential static damage to connected electronics built-in usb port and poweralert software (free via web download) provide safe, unattended system shutdown during extended blackouts built-in surge suppression (backed by $200,000 ultimate lifetime insurance u.s., canada, and puerto rico only) safeguards connected equipment against damage surge voltage withstand capability: ansi/ieee c62.41 categories a & b 6kv/200/500 amp 100khz ringwave and category b biwave. surge voltage attenuation: n-g 2000:1, l-g 240:1, l-n 100:1. insertion loss: 65 db n-g from 10khz to 100khz, 45 to 60 db l-g from 10khz to 100khz, 18 to 54 db l-n from 50khz to 500 khz. 3 protected outlets; 6-ft. cord 4 diagnostic leds indicate ac present, on battery, overload and battery low/replace optional pdub15 bypass pdu enables hot-swappable ups replacement with no disruption to connected equipment highlights 500va tower 120v line interactive ups with isolation transformer corrects brownouts as low as 83v without using battery power usb port, normal & common mode emi/rfi line noise immunity nema 5-15p input plug and 3 5-15r outlets package includes OMNI500ISO ups system usb cable instruction manual 1 / 5
specifications output output volt amp capacity (va) 500 output watt capacity (watts) 300 power factor 0.6 nominal output voltage(s) supported 115v; 120v frequency compatibility 60 hz output voltage regulation (line mode) -18%, +8% output voltage regulation (battery mode) 115v (+/- 5%) ups output receptacles 3 5-15r outlet(s) hot-swap pdu options pdub15 (2u / 8 5-15r outlets) output ac waveform (ac mode) sine wave output ac waveform (battery mode) pwm sine wave input rated input current (maximum load) 4.8a nominal input voltage(s) supported 120v ac ups input connection type 5-15p ups input cord length (ft.) 6 ups input cord length (m) 1.8 recommended electrical service 15a 120v input phase single-phase battery full load runtime (min.) 5.4 min. (300w) half load runtime (min.) 11 min. (150w) dc system voltage (vdc) 12 battery recharge rate (included batteries) less than 4.5 hours from 10% to 90% internal ups replacement battery cartridge rbc51 battery access battery access door battery replacement description hot-swappable, user replaceable batteries 2 / 5
voltage regulation voltage regulation description automatic voltage regulation (avr) maintains line power operation with input voltage as low as 83 undervoltage correction input voltages between 83 and 107 are boosted by 14% leds alarms & switches led indicators 4 leds indicate line power, battery power, overload and battery low/replace status audible alarm audible alarm indicates power-failure and low-battery conditions alarm cancel operation power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status switches 2 switches control off/on power status and alarm-cancel/self-test operation surge / noise suppression ups ac suppression joule rating 680 ups ac suppression response time instantaneous emi / rfi ac noise suppression yes isolation output isolation transformer professional grade load isolation transformer surge voltage withstand capability ansi/ieee c62.41 categories a & b 6kv/200/500 amp 100khz ringwave and category b biwave surge voltage attenuation n-g 2000:1, l-g 240:1, l-n 100:1 insertion loss 65 db n-g from 10khz to 100khz, 45 to 60 db l-g from 10khz to 100khz, 18 to 54 db l-n from 50khz to 500 khz physical installation form factors supported with included accessories tower installation form factors supported with optional accessories wallmount (upswm - tower mounting kit) primary form factor tower ups power module dimensions (hwd, in.) 10.8 x 5.2 x 7.5 ups power module dimensions (hwd, cm) 27.3 x 13.3 x 19 ups power module weight (lbs.) 21.8 ups power module weight (kg) 9.9 ups shipping dimensions (hwd / in.) 14 x 8.5 x 11 ups shipping dimensions (hwd / cm) 35.6 x 21.6 x 27.9 shipping weight (lbs.) 27 3 / 5
shipping weight (kg) 12.3 ups housing material pvc environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 100.9 battery mode btu / hr. (full load) 223.9 ac mode efficiency rating (100% load) 91% communications communications interface usb poweralert software free download from www.tripplite.com communications cable usb cable included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications line / battery transfer transfer time 2-4 milliseconds low voltage transfer to battery power (setpoint) 83 high voltage transfer to battery power (setpoint) 147 special features cold start (startup in battery mode during a power failure) cold-start operation supported high availability ups features hot swappable batteries certifications ups certifications tested to ul1778 (usa); tested to csa (canada); meets fcc part 15 category b (emi) warranty product warranty period (worldwide) 2-year limited warranty connected equipment insurance (u.s., canada & puerto rico) $200,000 ultimate lifetime insurance ? 2014 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 4 / 5
5 / 5
|
