View LTA260W3L01_7873327.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1bhf ( %pd/p -5"8- .0%&- samsung tft-lcd model : lta260w3-l01 samsung tft samsung tft - - lcd lcd model model : lta260w3 : lta260w3 - - l01 l01 customer : date : 12.jul.2006 any modification of specification is not allowed without sec's permission. note : product information product information date 4*(/"563& customer customer ? ? s approval s approval date 12.jul.2006 date 12.jul.2006 13&1"3&%#: "11307"&%#: product planning group3, lcd business samsung electronics co., ltd. www..net www..net
1bhf ( %pd/p -5"8- .0%&- contents revision history ------ ------------------- ------------------ ------------------ ------------------ ------------- (3) general description -------------- ----------------- --------------- --------------- --------------- ----------- (4) general information ----------- ------------------ ----------------- ------------------- --------------- ------- (4) 1. absolute maximum rating s ----------------- ------------------- --------------- --------------- -------- (5) 2. optical characteristics ---------------------- ----------------- ------------------- --------------- -------- (7) 3. electrical characteristi cs --------------------- ----------------- --------------- --------------- --------- (10) 3.1 tft lcd module 3.2 back light unit 3.3 inverter input & specification 4. block diagram ------------- ------------------ ------------------ ----------------- --------------- ---------- (13) 5. input terminal pin assignment ------------- ----------------- --------------- --------------- --------- (14) 5.1 input signal & power 5.2 inverter input pin configuration 5.3 inverter input power sequence 5.4 lvds interface 5.5 input signals, basic display colo rs and gray scale of each color 6. interface timing ------------- ------------------ ----------------- --------------- --------------- ---------- (19) 6.1 timing parameters (de only mode) 6.2 timing diagrams of interface signal (de only mode) 6.3 power on/off sequence 7. outline dimension ------------- ----------------- ------------------- --------------- --------------- ------- (22) 8. packing -------------- ------------------- ------------------ ------------------ ------------------ ------------ (24) 9. marking & others ------------ ------------------ ----------------- --------------- --------------- ---------- (25) 10. general precaution ------ ------------------- ----------------- ------------------- --------------- ------- (26) 10.1 handling 10.2 storage 10.3 operation 10.4 operation condition guide 10.5 others www..net www..net
1bhf ( %pd/p -5"8- .0%&- * revision history first issued all 000 jul 12, 2006 summary page rev. no date www..net www..net
1bhf ( %pd/p -5"8- .0%&- lta260w3-l01 is a color active matrix liquid crystal display (lcd) that uses amorphous silicon tft(thin film transistor) as switch ing components. this model is composed of a tft lcd panel, a driver circ uit and a back light unit. t he resolution of a 26.0? is 1366 x 768 and this model can display up to 16.7 million colors with wide viewing angle of 89 ? or higher in all directions. this panel is in tended to support applic ations to provide a excellent performance for flat panel display such as home-alone multimedia tft-lcd tv, display terminals for av application pr oducts, and high definition tv (hdtv). ? rohs compliance (pb-free) ? high contrast ratio, high apert ure ratio, fast response time ? pva(patterned vertical align) mode ? wide viewing angle ( ? 178 ? ) ? high speed response ? wxga (1366 x 768 pixels) resolution (16:9) ? low power consumption ? u - type 6 ccfts (cold cath ode fluorescent tube) ? de(data enable) mode ? lvds (low voltage differential si gnaling) interface (1pixel/clock) features general description description general information 48.0(d max ) mm 0.421(h) x 0.140(w)*3 pixel pitch g 4,500(max) weight ? 1.0mm mm 626.0(h typ ) x 373.3(v typ ) module size mm 575.769(h) x 323.712(v) active display area note haze 44% , hard-coating (3h) surface treatment cd/m 2 450 (typ.) luminance of white normally black display mode rgb vertical stripe pixel arrangement pixel 1366 x 768 number of pixels colors 8 bit - 16.7m display colors unit specification items www..net www..net
1bhf ( %pd/p -5"8- .0%&- 50 (1) v 6.5 gnd-0.5 v dd power supply voltage t. uniformity center ? 10 - | t (4) g 1.5 - v nop vibration ( non - operating ) (3) g - s nop shock ( non - operating ) (2),(5) ? 50 0 t opr glass surface temperature (operation) (2) ? 60 -20 t stg storage temperature note unit max. min. symbol item note (1) ta= 25 ? 2 ? c (2) temperature and relative humidity range are shown in the figure below. a. 90 % rh max. (ta ? 39 ? c) b. relative humidity is 90% or less. (ta > 39 ? c) c. no condensation (3) 11ms, sine wave, one time for ? x, ? y, ? z axis (4) 10-300 hz, sweep rate 10min, 30min for x,y,z axis 1. absolute maximum ratings if the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device. fig. temperature and relative humidity range www..net www..net
1bhf ( %pd/p -5"8- .0%&- (5) definition of test point t opr : temperature of the center of the glass surface (test point 5) t1~ t4 : temperature of each edge of the glass surface t max : the highest temperature of the glass surface | t should be less than 10 ? ( ? t = | t opr ?t max | ) ? 5mm 5mm lcd module (active) 5 12 4 3 www..net www..net
1bhf ( %pd/p -5"8- .0%&- 2. optical characteristics the optical characteristics should be m easured in a dark ro om or equivalent. measuring equipment : topcon bm-7,spectroradiometer sr-3 (ta = 25 ? 2 ? c, vdd=5v, fv= 60hz, f dclk =75mhz, i l = 6.2marms) - tbd - normal l,r =0 u,d =0 viewing angle tg g-to-g (7) sr-3 % - 72 - - color gamut ver. hor. (4) sr-3 % 25 - - b uni brightness uniformity (9 points) - 89 75 d - 89 75 u - 89 75 r (8) sr-3 degree - 89 75 c/r ? 10 l viewing angle (7) sr-3 k - 10000 - - color temperature white blue green red falling rising 0.290 wy 0.280 wx 0.063 by 0.144 bx 0.591 gy 0.286 gx 0.329 ry (7),(8) sr-3 typ. +0.03 0.643 typ. -0.03 rx color chromaticity (cie 1931) (6) sr-3 cd/m 2 - 450 400 y l luminance of white (center of screen) 12 9 - tf (5) bm-7 msec 21 16 - tr response time (3) sr-3 - 1200 800 c/r contrast ratio (center of screen) note unit max. typ. min. condition symbol item note (1) test equipment setup the measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the back light at the given temperature for stabilization of the back light. this should be measured in the center of screen. single lamp current : 6.0ma environment condition : ta = 25 ? 2 ? c www..net www..net
1bhf ( %pd/p -5"8- .0%&- 2 ? bm-7 1 ? sr-3 field photo detector photo detector lcd panel tft - lcd module the center of the screen sr-3 : 50 y bm-7 : 50 y field note (2) definition of test point y t ? a ? ? ? active area test point note (3) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gray min (gmin) at the center point ? of the panel cr g g / max min = gmax : luminance with all pixels white gmin : luminance with all pixels black 228 683 1138 640 384 128 www..net www..net
1bhf ( %pd/p -5"8- .0%&- note (4) definition of 9 points brightness uniformity note (5) definition of response time : sum of tr, tf buni bb b =? ? 100 (max min) max bmax : maximum brightness bmin : minimum brightness display data optical instruments response time t r t f 10% 90% white (data off) 0% black (data off) white (data on) 100% note (6) definition of luminance of white : luminance of white at center point ? note (7) definition of color chromaticity (cie 1931) color coordinate of red, green, blue & white at center point ? note (8) definition of viewing angle : viewing angle range (c/r ? 10) www..net www..net
1bhf ( %pd/p -5"8- .0%&- 3. electrical characteristics 3.1 tft lcd module the connector for display data & t iming signal shoul d be connected. ta = 25 ? c ? 2 ? c (4) a 5 - - i rush rush current mhz 82 75 65 f dclk main frequency khz 53 48 43 f h hsync frequency hz 66 60 48 f v vsync frequency ma 1550 1320 - (c) n-pattern ma - 1110 - (b) white (2),(3) ma - 710 - i dd (a) black current of power supply (1) v 5.5 5.0 4.5 v dd voltage of power supply note unit max. typ. min. symbol item note (1) the ripple voltage should be controlled under 10% of v dd . (2) f v =60hz, f dclk = 75mhz, v dd = 5.0v, dc current. (3) power dissipation check pattern (lcd module only) a) black pattern b) white pattern c) n-pattern (4) measurement conditions rush current i rush can be measured when t rush . is 470 k . t rush =470 k 100% gnd 90% 10% v dd www..net www..net
1bhf ( %pd/p -5"8- .0%&- 3.2 back light unit the back light unit contains 6 u-type ccfts ( cold cathode fluorescent tube ). the characteristics of lamps are s hown in the following tables. ta=25 ? 2 ? c (1) hour - - 50,000 hr operating life time vrms - 1970 - v l lamp voltage marms 7.0 6.0 4.0 i l lamp current note unit max. typ. min. symbol item note (1) it is defined as the time to take until the brightness reduces to 50% of its original value. [operating condition : ta = 25 ? 2 ? , i l = 6.0marms, for single lamp only. ] lcd module socket inverter hot 1 hot 2 hot 11 hot 12 lamp 1 lamp 6 www..net www..net
1bhf ( %pd/p -5"8- .0%&- - - 0 - - min. lum - v - - 3.3 max lum v dim dimming control 0.8 - 0 vin=24.0 v off - v 5.25 - 2.4 vin=24.0 v on backlight on/off khz 65 60 55 vin=24.0 v f lamp frequency marms 6.7 6.2 5.7 vdim=3.3 v i o lamp current initial turn-on a 5 - - vin=24.0v vdim=3.3v i rush input current ta=25 ??$ v 25 24 23 - vin input voltage max. typ. min. note unit specifications conditions symbol items 3.2.1 inverter input c ondition & specification www..net www..net
1bhf ( %pd/p -5"8- .0%&- 4. block diagram 4063$& 1$# %"5"%3*7&3 *$ 64&3$0//&$503 5*.*/($0/530--&3 %$%$$0/7&3503 "7 %% 7 %% 7 0/ 7 0''
.&.03: %$$
%$%$45&1%08/ (".."(&/&3"503 7 $0. (&/&3"503 3453*/('# '1$ $0/530-1$# %"5" $0/530- 7 */ 7
"7 %% 7 0/ 7 0'' 7 $0. :70-5"(& 7 %% 7
7 %% 7
-5"8 1"/&- www..net www..net
1bhf ( %pd/p -5"8- .0%&- 5. input terminal pin assignment 5.1. input signal & power connector : fi-e30s (jae) vin 30 rxclk+ 15 vin 29 rxclk- 14 vin 28 gnd 13 vin 27 rxin2+ 12 vin 26 rxin2- 11 gnd 25 gnd 10 gnd 24 rxin1+ 9 gnd 23 rxin1- 8 no connection 22 gnd 7 lvds option (note 1) 21 rxin0+ 6 gnd 20 rxin0- 5 gnd 19 gnd 4 rxin3+ 18 no connection 3 rxin3- 17 no connection 2 gnd 16 no connection 1 description pin no. description pin no. note) no connection: this pins are only used for samsung internal using. (1) lvds option : if this pin : high (3.3 v) or open a normal lvds format : low (gnd) a jeida lvds format sequence : on = v dd (t1) ? lvds option ? interface signal(t2) off = interface signal(t3) ? lvds option ? v dd www..net www..net
1bhf ( %pd/p -5"8- .0%&- note(1) pin number starts from right side pin no. 1 pin no. 30 ? pcb a. all gnd pins should be connected together and also be connected to the lcd?s metal chassis. b. all power input pins should be connected together. c. all nc pins should be separated from other signal or power. fig. connector diagram #1 connect name #30 #1 #30 www..net www..net
1bhf ( %pd/p -5"8- .0%&- 5.2. inverter input pin configuration connector : s14b-ph-sm3-tb(jst) no connection 14 dimming control [0v:min, 3.3v:max] 13 backlight on /off [on:2.4 - 5.25 v, off: 0 - 0.8 v] 12 no connection * error detection (normal : gnd / abnormal : 5v) 11 gnd 10 gnd 9 gnd 8 gnd 7 gnd 6 24 v 5 24 v 4 24 v 3 24 v 2 24 v 1 pin configuration(function) pin no. 5.3. inverter input power sequence 0.5sec [min] vin (24v) dimming control ( 0 ~ 3.3 v ) 0.5sec [min] 0.1sec [min] 0.5sec [min] 1.1sec [min] 20msec [min] back light on/off 0.95 vin 0.1 vin 2.4 v on off www..net www..net
1bhf ( %pd/p -5"8- .0%&- 5.4 lvds interface - lvds receiver : tcon (merged) - data format (jeida & normal) reserved reserved txin/rxout23 b7 b1 txin/rxout17 b6 b0 txin/rxout16 g7 g1 txin/rxout11 g6 g0 txin/rxout10 r7 r1 txin/rxout5 r6 r0 txin/rxout27 txout/rxin3 den den txin/rxout26 vsync vsync txin/rxout25 hsync hsync txin/rxout24 b5 b7 txin/rxout22 b4 b6 txin/rxout21 b3 b5 txin/rxout20 b2 b4 txin/rxout19 txout/rxin2 b1 b3 txin/rxout18 b0 b2 txin/rxout15 g5 g7 txin/rxout14 g4 g6 txin/rxout13 g3 g5 txin/rxout12 g2 g4 txin/rxout9 g1 g3 txin/rxout8 txout/rxin1 g0 g2 txin/rxout7 r5 r7 txin/rxout6 r4 r6 txin/rxout4 r3 r5 txin/rxout3 r2 r4 txin/rxout2 r1 r3 txin/rxout1 r0 r2 txin/rxout0 txout/rxin0 vesa -data jeida -data lvds pin www..net www..net
1bhf ( %pd/p -5"8- .0%&- 5.5 input signals, basic display co lors and gray scale of each color b252 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue b252 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b252 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : b3~ b252 : : : : : : : : : : : : : : : : : : b2 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dark ? - light b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g252 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green g252 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g252 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : g3~ g252 : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 dark ? - light g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of green r252 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red r252 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 r252 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : r3~ r252 : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark ? - light r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 magenta - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic color b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display (8bit) color note) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gray level) input signal : 0 = low level voltage, 1 = high level voltage www..net www..net
1bhf ( %pd/p -5"8- .0%&- 6. interface timing 6.1 timing parameters ( de only mode ) - clocks 1750 1688 1420 t h horizontal total - clocks - 1366 - t hd active display period horizontal display term - lines 1000 806 780 t vb vertical total - lines - 768 - t vd active display period vertical display term - hz 66 60 48 f v vsync - khz 53 48 43 f h hsync - mhz 82 75 65 1/t c frequency clock note unit max. typ. min. symbol item signal note) this product is de only mode. the input of hsync & vsync signal does not have an effect on normal operation. (1) test point : ttl control signal and clk at lvds tx input terminal in system (2) internal v dd = 3.3v www..net www..net
1bhf ( %pd/p -5"8- .0%&- 6.2 timing diagrams of interfac e signal ( de only mode ) data signals de t vd t v t h d clk t c de t hd t vb 0.5 v cc t es t ds t dh t ch t cl t c de display data d clk 0.5 v cc 0.5 v cc www..net www..net
1bhf ( %pd/p -5"8- .0%&- 6.3 power on/off sequence to prevent a latch-up or dc operatio n of the lcd module, the power on/off sequence should be as the diagram below. t1 : v dd rising time from 10% to 90% t2 : the time from v dd to valid data at power on. t3 : the time from valid data off to v dd off at power off. t4 : v dd off time for windows restart t5 : the time from valid data to b/l enable at power on. t6 : the time from valid data off to b/l disable at power off. ? the supply voltage of the external system for the module input should be the same as the definition of v dd . ? apply the lamp voltage within the lcd operation range. when the back light turns on before the lcd operation or the lcd turns off before the back light turns off, the display may momentarily show abnormal screen. ? in case of v dd = off level, please keep the level of input signals low or keep a high impedance. ? t4 should be measured after the module has been fully discharged between power off and on period. ? interface signal should not be kept at high impedance when the power is on. 0 .pefm -5"8- %pd /p ( 1bhf 7. outline dimension (front view) www..net www..net
.pefm -5"8- %pd /p ( 1bhf 7. outline dimension (rear view) www..net www..net
1bhf ( %pd/p -5"8- .0%&- 8. packing 8.1 carton (internal package) (1) packing form corrugated fiberboard box and corr ugated cardboard as shock absorber (2) packing method pallet(8.0kg) + module(4.5*24=108.0kg) + cushion(10.8kg) + pallet-box(7.0kg) 133.8 kg total pallet weight 1150mm(h) x 985mm(v) x 1054mm(height) h x v x height total pallet size - vertical packing direction pallet weight : 8.0kg 1 box / pallet pallet 1. 108.0kg/lcd(24ea) 2. 10.8kg/cushion set(4ea) 4. 7.0kg/packing-pallet box(1ea) 5. cushion material : eps 6. packing pallet box material : dw4 24 ea / (packing- pallet box) lcd packing remark specification item 8.2 packing specification packing pallet box cushion set module (15ea) pallet www..net www..net
1bhf ( %pd/p -5"8- .0%&- 9. marking & others a nameplate bearing followed by is affix ed to a shipped product at the specified location on each product. (1) parts number : lta260w3-l01 (2) revision: three letters (3) lot number : x x x x xxx xx x cell position no. (in the glass) glass no. (in the one lot) lot no. (glass) month year (note1) product code line 40mm 80mm week code : 05 29 week year (4) nameplate indication (6) others 1. after service part lamps cannot be replaced because of the narrow bezel structure. (5) packing box attach part number 100mm 165mm box serial number -5"8- 9999 lta260w3-l01 9999999999 999 lot number revision code www..net www..net
1bhf ( %pd/p -5"8- .0%&- 10. general precautions 10.1 handling (a) when the module is assembled, it should be attached to the system firmly using all mounting holes. be careful not to twist and bend the module. (b) because the inverter us e high voltage, it should be disconnected from power before it is assembled or disassembled. (c) refrain from strong mechanical shock and / or any force to the module. in addition to damage, this may cause im proper operation or damage to the module and ccft back light. (d) note that polarizers are very fragile and coul d be damage easily. do not press or scratch the surf ace harder than a hb pencil lead. (e) wipe off water droplets or oil immedi ately. if you leave the droplets for a long time, staining or discoloration may occur. (f) if the surface of the polarizer is dirty, clean it using absorben t cotton or soft cloth. (g) desirable cleaners are water, ipa(isopropy l alcohol) or hexane. do not use ketone type materi als(ex. acetone), ethyl alc ohol, toluene, ethyl acid or methyl chloride. it might permanent damage to the polarizer due to chemical reaction. (h) if the liquid crystal material leaks fr om the panel, it should be kept away from the eyes or mouth . in case of cont act with hands, legs or clothes, it must be washed away with soap thoroughly. (i) protect the module from static, or the cmos gate array ic would be damaged. (j) use finger-stalls with soft gloves in order to keep displa y clean during the incoming inspection and assembly process. (k) do not disassemble the module. (l) do not pull or fold the lamp wire. (m) do not adjust the variable resistor located on the module. (n) protection film for polarizer on the module should be slowly peeled off just before use so that the electrostati c charge can be minimized. (o) pins of i/f connector should not be touched directly with bare hands. www..net www..net
1bhf ( %pd/p -5"8- .0%&- 10.2 storage (a) do not leave the module in high temper ature, and high humidity for a long time. it is highly recommended to store the module with temperature from 0 to 35 ? and relative humidity of less than 70%. (b) do not store the tft-lcd module in direct sunlight. (c) the module should be stored in a dark plac e. it is prohibited to apply sunlight or fluorescent light in storing. 10.3 operation (a) no connection or disconnect the module in the "power on" condition. (b) power supply should always be turned on/off by the "power on/off sequence" (c) module has high frequ ency circuits. sufficient suppr ession to the electromagnetic interference should be done by system ma nufacturers. grounding and shielding methods may be important to minimize the interference. (d) the cable between the back light connector and its inverter power supply should be connected directly with a minimi zed length. a longer cable between the back light and the inverter may ca use lower luminance of lamp(ccft) and may require higher startup voltage(vs). 10.4 operation condition guide (a) the lcd product should be oper ated under norm al conditions. normal condition is defined as below; - temperature : 20 ? 15 ? - humidity : 55 ? 20% - display pattern : continually ch anging pattern (not stationary) (b) if the product will be used in extreme conditions such as high temperature, humidity, display patterns or operation time etc.., it is strongly recommended to contact sec for application engineer ing advice. otherwise, its reliability and function may not be guarant eed. extreme conditions are commonly found at airports, transit stations, banks, stock market, and controlling systems. www..net www..net
1bhf ( %pd/p -5"8- .0%&- 10.5 others (a) ultra-violet ray filter is necessary for outdoor operation. (b) avoid condensation of water. it may result in improper operat ion or disconnection of electrode. (c) do not exceed the absolute maximum ra ting value. ( supply voltage variation, input voltage variation, variation in part contents and envir onmental temperature, and so on) otherwise the module may be damaged. (d) if the module keeps disp laying the same pattern for a long period of time, the image may be "sticked" to the screen. to avoid image sticking, it is recommended to use a screen saver. (e) this module has its circuitry pcb's on the rear side and should be handled carefully in order not to be stressed. (f) please contact sec in advance when you display the sa me pattern for a long time. www..net www..net

▲Up To Search▲

Price & Availability of LTA260W3L01

	To Download LTA260W3L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .