|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
vsop584.. www.vishay.com vishay semiconductors rev. 1.1, 10-nov-11 1 document number: 82444 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 preamplifier circuit for ir remote control mechanical data pinning: 1, 4, 5= n.c., 2 = v s , 3 = out, 6, 8 = gnd, 7 = in features ? narrow bandpassfilter for all common carrier frequencies ? high immunity against dc light ? intelligent agc to suppress di sturbance from fluorescent lamps and crts ? low power consumption ? wide supply voltage range ? high immunity against ripple on the supply voltage ? output active low ? ic manufactured in cmos technology ? small qfn packag e with 2 mm width ? compliant to rohs directive 2002/95/ec note ** please see document vishay material category policy: www.vishay.com/doc?99902 description the vsop584.. is designed for use in an ir receiver application together with a photo pin diode. it is a sophisticated receiver concept that is very sensitive to data signals and compatible with the most common data formats for ir remote control. on the other hand it is immune to dc current caused by dc light sources such as tungsten bulbs. the disturbance signal of fl uorescent lamps is suppressed; there are no unwanted pulses at the output. note ? circuits for other carrier frequencies are available on request. block diagram (simplified) application circuit vishay recommends using a photodiode with at least 2.3 mm 2 area. the connection between the photodiode and pin 7 should be kept as sh ort as possible and carefully shielded to prevent noise coupling. 22529 parts table carrier frequency part number 36 khz vsop58436 38 khz VSOP58438 + v s output, to c g nd input, from photodiode bia s controlled gain amplifier automatic gain control band- pa ss - filter 33 k automatic thre s hold control inte- grator 21536-3 21537-5 the rc filter i s optional to improve the eo s robu s tne ss and the immunity to s upply voltage ripple. we recommend to keep the di s tance between the photodiode and the input of the v s op584.. a s s hort a s po ss ible. microcontroller or other logic to decode the ir s ignal 100 0.22 f v s = 2.7 v to 5.5 v 0 v v s op584.. v s g nd in out www.datasheet.co.kr datasheet pdf - http://www..net/
vsop584.. www.vishay.com vishay semiconductors rev. 1.1, 10-nov-11 2 document number: 82444 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? stresses beyond those listed under absolute maximum ratings ma y cause permanent damage to the device. this is a stress ratin g only and functional operation of the device at these or any other cond itions beyond those indicated in the operational sections of t his specification is not implied. exposure to absolute maximum rating co nditions for extended periods may affect the device reliability. fig. 1 - testsignal absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit supply voltage pin 2 v s - 0.3 to + 6 v supply current pin 2 i s 5ma output voltage pin 3 v o - 0.3 to (v s + 0.3) v output sink current pin 3 i o 5ma power dissipation t amb 85 c p tot 10 mw operating temperature range t amb - 25 to + 85 c storage temperature range t stg - 25 to + 85 c esd stress, hbm pin 2, pin 3, mil-std-883c v esd 2000 v pin 7, mil-std-883c v esd 500 v esd stress, mm pin 2, pin 3, mil-std-883c v esd 200 v pin 7, mil-std-883c v esd 100 v electrical characteristics (t amb = - 30 c to + 85 c, v s = 2.7 v to 5.5 v, unless otherwise specified) parameter test condition symbol min. typ. max. unit supply current (pin 2) i in = 0, v s = 5 v i s 0.65 0.85 1.05 ma output voltage low (pin 3) i ol = 2 ma v ol 100 mv output voltage high (pin 3) i ol = 0 v oh v s - 0.25 v internal pull up resistor (pin 2, pin 3) r pu 33 k max. input dc current v in > 0 i in-dcmax. 400 a min. signal detection current i in-dc = 0, f c = f bpf i in-min. 700 1000 pa i in-dc = 100 a, f c = f bpf i in-min. 510na output pulse width i in-dc = 0, f c = f bpf , i in = 0.8 na to 50 a, testsignal see fig. 1, ber 2% t po t pi - 6/f 0 t pi t pi + 6/f 0 s accuracy of bandpass center frequency t amb = + 25 c f bpf f 0 - 4 % f 0 f 0 + 4 % khz bandwidth of bandpassfilter - 3 db, f 0 = 38 khz b 3.8 khz burst length t pi output pulse width t po i in v out one carrier cycle 1/f c burst length of input signal t pi output pulse width t po i in v out 21538 www.datasheet.co.kr datasheet pdf - http://www..net/ vsop584.. www.vishay.com vishay semiconductors rev. 1.1, 10-nov-11 3 document number: 82444 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, v s = 3.3 v, unless otherwise specified) fig. 2 - output pulse diagram fig. 3 - sensitivity vs. dc input current fig. 4 - bandpassfilter characteristic fig. 5 - suppression of ripple on supply voltage fig. 6 - sensitivity vs. temperature fig. 7 - maximum envelope duty cycle 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.1 10 1000 100 000 t off t po testsignal: t pi = 0.6 ms burst repetition time = 1.2 ms 21539 output pulse width (ms) i in - input current (na) i in-min. - minimum detection current (na) dc input current (a) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.01 0.1 1 10 100 wavelength of ambient illumination: = 950 nm frequency (khz) i in-min. - minimum detection current (na) 0 0.5 1.0 1.5 2.0 2.5 32 34 36 38 40 42 44 VSOP58438 1 10 100 1000 i in-min. - minimum detection current (na) vs - ac ripple on dc supply voltage (mv pp ) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 f = 100 hz f = 10 khz f = f o - 30 - 10 10 30 50 70 90 i in-min. - minimum detection current (na) t amb - ambient temperature (c) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 maximum envelope duty cycle bur s tlength (number of cycle s /bur s t) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 50 100 150 i in = 5 na www.datasheet.co.kr datasheet pdf - http://www..net/ vsop584.. www.vishay.com vishay semiconductors rev. 1.1, 10-nov-11 4 document number: 82444 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters assembly instructions reflow soldering ? set the furnace temperatures for pre-heating and heating in accordance with the refl ow temperature profile as shown in the diagram. excercis e extreme care to keep the maximum temperatu re below 260 c. the temperature shown in the profile means the temperature at the device surface. since there is a temperature difference between the component and the circuit bo ard, it should be verified that the temperature of the device is accurately being measured ? handling after reflow should be done only after the work surface has been cooled off manual soldering ? use a soldering iron of 25 w or less. adjust the temperature of the soldering iron below 300 c ? finish soldering within 3 s ? handle products only after the temperature has cooled off. (6x) propo s ed hole layout from component s ide (for reference only) technical drawing s according to din s pecification s not indicated tolerance s 0.1 drawing-no.: 6.550-5314.01-4 i ss ue: 2; 07.11.11 0.76 0.05 0.2 ref. 2 2 0.5 typ. (6x) 0.3 0.1 0.2 min. 0.9 0.15 1.6 0.15 0.25 x 45 expo s ed pad chamfered corner pin 1 indicator pin 1 indicator (8x) 10:1 0.35 0.65 1.3 0.5 (8x) 1. coplanarity (0.1 mm) applie s to the expo s ed pad a s well a s the expo s ed terminal s . 2. package dimen s ion doe s not include mold fla s h, protru s ion s , burr s , or metal s mearing. pinning: 1. n.c. 2. v s 3. out 4. n.c. 5. n.c. 6. g nd 7. in 8. g nd (8x) 0.25 0.05 (8x) 3338 yww marking area www.datasheet.co.kr datasheet pdf - http://www..net/ vsop584.. www.vishay.com vishay semiconductors rev. 1.1, 10-nov-11 5 document number: 82444 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vishay lead (pb)-free reflow solder profile taping version vsop dimensions in millimeters 0 50 100 150 200 250 300 0 50 100 150 200 250 300 t (s) t (c) 255 c 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 20 s max. ramp up 3 c/s max. ramp down 6 c/s max. 2 cycles allowed 19800 www.datasheet.co.kr datasheet pdf - http://www..net/ vsop584.. www.vishay.com vishay semiconductors rev. 1.1, 10-nov-11 6 document number: 82444 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 reel dimensions in millimeters label standard bar code labels for finished goods the standard bar code labels are product labels and used for identification of goods. th e finished goods are packed in final packing area. the standard packing units are labeled with standard bar code labels before transported as finished goods to warehouses. the labels are on each packing unit and contain vishay semiconductor gmbh specific data. reel reel size (inch) reel width (mm) trailer leng th (mm) leader length (mm) qantity per reel 7 8.4 160 400 3000 22610 reel s ize reel width vishay semiconductor gmbh standard bar code product label (finished goods) plain writting abbreviation length item-description - 18 item-number ino 8 selection-code sel 3 lot-/serial-number batch 10 data-code cod 3 (yww) plant-code ptc 2 quantity qty 8 accepted by acc - packed by pck - mixed code indica tor mixed code - origin xxxxxxx+ company logo long bar code top type length item-number n 8 plant-code n 2 sequence-number x 3 quantity n 8 total length - 21 short bar code bottom type length selection-code x 3 data-code n 3 batch-number x 10 filter - 1 total length - 17 www.datasheet.co.kr datasheet pdf - http://www..net/ vsop584.. www.vishay.com vishay semiconductors rev. 1.1, 10-nov-11 7 document number: 82444 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 esd precaution proper storage and handling procedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electro-static sensitive devices warning labels are on the packaging. vishay semiconductors standard bar code labels the vishay semiconductors st andard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. 16962 www.datasheet.co.kr datasheet pdf - http://www..net/ document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/ |
Price & Availability of VSOP58438 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |