this specification documents the detailed requirements for analog devices space qualified die including die qualification as described for class k in mil - prf - 38534, appendix c, table c - ii except as modified herein. the manufacturing flow descri bed in the standar d die products program brochure at http://www.analog.com/marketsolutions/militaryaerospace/pdf/die_broc.pdf is to be considered a part of this speci fication. this data sheet specifically details the space grade version of this product. a more detailed operational description and a complete data sheet for commercial product grades can be found at www.analog. com/op11 the complete part number(s) of this specification follow: part number description op11 - 000c quad matched 741 - type operational amplifier
1/ positive supply voltage (+v s ).......................................... +22v dc negative supply voltage ( - v s ) .................................... .... - 22v dc differential input voltage ................................................ 30v dc input voltage (v in )............................................................ supply voltage output short circuit duration............................ ............... continuous junction temperature (t j ) .. +150c storage temperature range ............................................. - 65 c to +150 c ambient operational temperature range......................... - 55 c to +125 c absolute maximum ratings notes: 1 / stresses above the absolute maximum rating may cause permanent damage to the device. extended operation at the maximum levels may degrade performance and affect reliability. in accordance with cl ass - k version of mil - prf - 38534, appendix c, table c - ii, except as modified herein. (a) qual sample size and qual acceptance criteria C 10/0 (b) qual sample package C dip (c) pre - screen electrical test over temperature performed post - assembly prior to die qualification . table i notes: 1/ v s = 15v, r s = 50 ? , t a = +25 c, and v cm = 0v, unless otherwise specified.
tabl e ii notes: 1/ v s = 15v, r s = 50 ? , and v cm = 0v, unless otherwise specified.
5.1 htrb is not applicable for this drawing. 5.2 burn - in is per mil - std - 883 method 1015 test condition b or c. 5.3 steady state life test is per mil - std - 883 method 1005.
|
