CC1- www.vishay.com vishay electro-films revision: 27-may-13 1 document number: 61001 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thin film 0402 size resistor on alumina product may not be to scale the CC1- series single-value resistor chips offer a small size, low shunt capacitance and solder pad option. the CC1- nichrome resistors material offers excellent stability. ? the CC1- resistors are manufactured using vishay electro-films (efi) sophistica ted thin film equipment and manufacturing technology. th e CC1- resistors are 100 % electrically tested and visua lly inspected to mil-std-883. features ? wire bondable ? small single chip size: 0.020" x 0.040" ? case: 0402 ? resistance range: 10 ? to 24 k ? ? alumina substrate ? low stray capaci tance: < 0.2 pf ? resistor material: nichrome ? resistor passivation coat optional ? solder pads optional ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 note ? * this datasheet provides information about parts that are ? rohs-compliant and/or parts th at are non-rohs-compliant. for ? example, parts with lead (pb) te rminations are not rohs-compliant. ? please see the information/tables in this datasheet for details. applications vishay efi CC1- chip resistors provide excellent high-frequency response and are ideally suited for prototyping. typical application areas are: ?amplifiers ? oscillators ? attenuators ?couplers ?filters recommended for hermetic envi ronments where die is not exposed to moisture. note ? only 25 ? to 1 k ? are standard strip line designs for microwave applications available available available available temperature coefficient of resistance, values, and tolerances parameter value unit total resistance range 10 to 24k ? standard tolerances 0.05, 0.1 % tcr 25, 50, 100 ppm/c standard electrical specifications parameter value unit noise, mil-std-202, me thod 308 - 20 typ. db moisture resistance , mil-std-202, method 106 - hermetic applications 0.2 max. ? r / r % stability, 1000 h, + 125 c, 40 mw 0.1 max. ? r / r % operating temperature range - 55 to + 125 c thermal shock, mil-std-202, method 107, test condition f 0.25 max. ? r / r % high temperature exposure, + 150 c, 100 h 0.1 max. ? r / r % dielectric voltage breakdown 400 v insulation resistance 10 12 min. ? operating voltage 100 max. v dc power rating at + 125 c (derat ed to zero at + 150 c) 0.040 max. w 5 x rated power short- time overload, + 25 c, 5 s 0.25 max. ? r / r % 10 20 200 12 k 24 k 100 ppm/c 50 ppm/c 25 ppm/c 0.1 % 0.5 % tightest standard tolerance available
CC1- www.vishay.com vishay electro-films revision: 27-may-13 2 document number: 61001 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches schematic mechanical specifications parameter value chip size 0.020" x 0.040" 0.003" (0.5 mm x 1.0 mm 0.08 mm) chip thickness 0.010" 0.002" (0.254 mm 0.03 mm) chip substrate material 99.6 % alumina, 2 "to 4 " finish resistor material nichrome bonding pad size 0.010" x 0. 012" (0.175 mm x 0.30 mm) number of pads 2 pad material 25 k? minimum gold standard backing none global part number information global part numb er: CC1-12500kkssnhws ? global part number description: CC1- 1.25k 10 %, 100 pp m/c, std trim, snpb contacts, no back metal, class h, ws model resistance res. multiplier code tol. code (%) tcr (ppm/c) trim style termination back metal visual class packaging code CC1- first 4 digits are significant figures of resistance b = 0.01 a = 0.1 0 = 1 1 = 10 b = 0.1 c = 0.25 d = 0.5 f = 1.0 g = 2.0 j = 5.0 k = 10 e = 25 c = 50 k = 100 e = edg s = std u = usr g = au s = snpb a = al t = lead (pb)-free (e1) g = au n = none h = class h k = class k ws = waffle pack 100 min, 1 mult 0.020 0.040 0.012 0.010 typical range 10 to 15 0.020 0.040 0.012 0.010 typical range 16 to 29 0.020 0.040 0.012 0.010 typical range 30 to 24 k 250 kss k - nh 1 cc 1 ws 0
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
