Part Number Hot Search : 
13020 TFS208B LC7366 3LB200C 2N7522 EMK11 H6413 124141
Product Description
Full Text Search
 

To Download PS9317L2-AX Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  high cmr, 10 mbps, open collector output type, 8 mm creepage 6-pin sdip photocoupler photocoupler ps9317l,ps9317l2 ? nepoc series ? document no. pn10690ej02v0ds (2nd edition) date published august 2008 ns description the ps9317l and ps9317l2 are optical coupled high-speed, active low type isolat ors containing a gaalas led on the input side and a photodiode and a signal proce ssing circuit on the output side on one chip. the ps9317l and ps9317l2 are designed specifically for hi gh common mode transient immunity (cmr) and low pulse width distortion. the ps9317l is lead bending type (gull- wing) for surface mounting. the ps9317l2 is lead bending type for long creepage di stance (gull-wing) for surface mount. features 64 13 2 5 1. anode 2. nc 3. cathode 4. gnd 5. v o 6. v cc pin connection (top view) ? pulse width distortion ( ? t phl ? t plh ? = 35 ns max.) ? high common mode transient immunity (cm h , cm l = 15 kv/ s min.) ? half size of 8-pin dip ? long creepage distance (8 mm min. : ps9317l2) ? high-speed (10 mbps) ? high isolation voltage (bv = 5 000 vr.m.s.) ? open collector output ? pb-free product ? safety standards ? ul approved: file no. e72422 ? csa approved: no. ca 101391 ? din en60747-5-2 (vde0884 part2) approved: no. 40024069 (option) applications led output on l off h truth table ? measurement equipment ? pdp ? fa network the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and spec ifying it in the "find what:" field. 2007, 2008
ps9317l,ps9317l2 package dimensions (unit: mm) lead bending type (gull-wing) for surface mount 0.250.15 9.70.3 3.70.25 0.80.25 0.20.15 7.62 3.50.2 6.80.25 4.580.25 (0.82) ps9317l 0.40.1 0.25 m 1.27 lead bending type for long creepage distance (gull-wing) for surface mount 0.20.15 ps9317l2 11.50.3 6.80.25 4.580.25 0.250.15 0.750.25 (0.82) 3.70.25 3.50.2 7.62 0.40.1 0.25 m 1.27 data sheet pn10690ej02v0ds 2
ps9317l,ps9317l2 marking example rank code year assembled (last 1 digit) week assembled n 8 31 9317 n831 no. 1 pin mark assembly lot type number *1 *1 bar : pb-free photocoupler construction parameter ps9317l ps9317l2 air distance (min.) 7 mm 8 mm outer creepage distance (min.) 7 mm 8 mm isolation distance (min.) 0.4 mm 0.4 mm ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps9317l ps9317l-ax pb-free 20 pcs (tape 20 pcs cut) standard products ps9317l ps9317l-e3 ps9317l-e3-ax (ni/pd/au) embossed tape 2 000 pcs/reel (ul, csa approved) ps9317l2 PS9317L2-AX 20 pcs (tape 20 pcs cut) ps9317l2 ps9317l2-e3 ps9317l2-e3-ax embossed tape 2 000 pcs/reel ps9317l-v ps9317l-v-ax 20 pcs (tape 20 pcs cut) din en60747-5-2 ps9317l ps9317l-e3-v ps9317l-e3-v-ax embossed tape 2 000 pcs/reel (vde0884 part2) ps9317l2-v ps9317l2-v-ax 20 pcs (tape 20 p cs cut) approved (option) ps9317l2 ps9317l2-e3-v ps9317l2-e3-v-ax embossed tape 2 000 pcs/reel *1 for the application of the safety st andard, following part number should be used. data sheet pn10690ej02v0ds 3
ps9317l,ps9317l2 absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current *1 i f 30 ma reverse voltage v r 5 v detector supply voltage v cc 7 v output voltage v o 7 v output current i o 25 ma power dissipation *2 p c 40 mw isolation voltage *3 bv 5 000 vr.m.s. operating ambient temperature t a ?40 to +85 c storage temperature t stg ?55 to +125 c *1 reduced to 0.3 ma/ c at t a = 25 c or more. *2 applies to output pin v o (collector pin). reduced to 1.5 mw/ c at t a = 65 c or more. *3 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-3 shorted together , 4-6 shorted together. recommended operating conditions parameter symbol min. typ. max. unit low level input voltage v fl 0 0.8 v high level input current i fh 6 12 ma supply voltage v cc 4.5 5.0 5.5 v ttl (r l = 1 k , loads) n 5 pull-up resistor r l 330 4 k data sheet pn10690ej02v0ds 4
ps9317l,ps9317l2 electrical characteristics (t a = ? 40 to +85 c, unless otherwise specified) parameter symbol conditions min. typ. *1 max. unit diode forward voltage v f i f = 10 ma, t a = 25 c 1.2 1.56 1.9 v reverse current i r v r = 3 v, t a = 25 c 10 a terminal capacitance c t v = 0 v, f = 1 mhz, t a = 25 c 60 pf detector high level output current i oh v cc = v o = 5.5 v, v f = 0.8 v 1 100 a low level output voltage *2 v ol v cc = 5.5 v, i f = 5 ma, i ol = 13 ma 0.2 0.6 v high level supply current i cch v cc = 5.5 v, i f = 0 ma, v o = open 4 7 ma low level supply current i ccl v cc = 5.5 v, i f = 10 ma, v o = open 6 10 ma coupled threshold input current i fhl v cc = 5 v, v o = 0.8 v, r l = 350 2.5 5 ma (h l) isolation resistance r i-o v i-o = 1 kv dc , rh = 40 to 60%, t a = 25 c 10 11 isolation capacitance c i-o v = 0 v, f = 1 mhz, t a = 25 c 0.7 pf propagation delay time t phl t a = 25 c 40 75 ns (h l) 100 propagation delay time t plh t a = 25 c 35 75 (l h) 100 rise time t r v cc = 5 v, r l = 350 , c l = 15 pf, 20 fall time t f i f = 7.5 ma, v thhl = v thlh = 1.5 v 5 pulse width distortion (pwd) ? t phl ?t plh ? 5 35 propagation delay skew t psk 40 common mode transient immunity at high level output cm h v cc = 5 v, r l = 350 , t a = 25 c, i f = 0 ma, v o > 2 v, v cm = 1.5 kv 15 kv/ s common mode transient immunity at low level output cm l v cc = 5 v, r l = 350 , t a = 25 c, i f = 7.5 ma, v o < 0.8 v, v cm = 1.5 kv 15 kv/ s *1 typical values at t a = 25 c. *2 because v ol of 2 v or more may be output when led current input and when output supply of v cc = 2.6 v or less, it is important to confirm t he characteristics (operation with the power supply on and off) during design, before using this device. data sheet pn10690ej02v0ds 5
ps9317l,ps9317l2 usage cautions 1. this product is weak for static el ectricity by designed with high-speed integr ated circuit so protect against static electricity when handling. 2. by-pass capacitor of 0.1 f is used between v cc and gnd near device. also, ens ure that the distance between the leads of the photocoupler and c apacitor is no more than 10 mm. 3. avoid storage at a high te mperature and high humidity. notes on handling cautions regarding noise be aware that when voltage is applied suddenly bet ween the photocoupler?s i nput and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is wi thin the absolute maximum ratings. data sheet pn10690ej02v0ds 6
ps9317l,ps9317l2 specification of vde marks license document parameter symbol speck unit application classification (din en 60664-1 vde0110 part 1) for rated line voltages 300 vr.m.s. for rated line voltages 600 vr.m.s. iv iii climatic test class (din en 60664-1 vde0110) 40/85/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.5 u iorm , p d < 5 pc u iorm u pr 1 130 1 695 v peak v peak test voltage (partial discharge te st, procedure b for all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 2 119 v peak highest permissible overvoltage u tr 8 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 clearance distance ps9317l >7.0 mm ps9317l2 >8.0 creepage distance ps9317l >7.0 mm ps9317l2 >8.0 comparative tracking index (din iec 112/vde 0303 part 1) cti 175 material group (din en 60664-1 vde0110 part 1) iii a storage temperature range t stg ?55 to +125 c operating temperature range t a ?40 to +85 c isolation resistance, minimum value v io = 500 v dc at t a = 25c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum permi ssible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 175 400 700 10 9 c ma mw data sheet pn10690ej02v0ds 7
data sheet pn10690ej02v0ds 8 ps9317l,ps9317l2 the information in this document is current as of august, 2008. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
ps9317l,ps9317l2 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or i any way allow it to enter the mouth.


▲Up To Search▲   

 
Price & Availability of PS9317L2-AX

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X