l1a thru l7a surface mount glass passivated rectifier reverse voltage 50~1000v forward current 1a www.goodark.com 1/4 2014.03-rev.a features ? glass passivated standard rectifiers ? ideal for automated placement lf dlt d ? l ow f orwar d vo lt age d rop ? low leakage current ? moisture sensitivity: level 1, per j-std-020 ? solder dip 260 c, 10 s ? low p rofile t yp ical thickness 1.0mm ? aec-q101 qualified typical applications esgb ? (smaf) typical applications for use of general purpose rectification in lighting, cellular phone, portable device, power supplies, and other consumer applications. l1a l2a symbol l3a l4a l5a l6a l7a maximum ratin g s ( t a = 25 c unless otherwise noted ) parameter unit vrrm 50 100 200 400 600 800 1000 v vrms 35 70 140 280 420 560 700 v vdc 50 100 200 400 600 800 1000 v if(av) a l1a l2a maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current at tl s ym b o l 1.0 l3a l4a l5a l6a l7a p arame t e r u n it ifsm a tj, tstg c operating junction and storage temperature range (s fi 1) peak forward surge current 8.3 ms single half sine-wave superimposed on rated load 30 - 55 to + 150 el t i l ch t i ti maximum instantaneous forward lt 1 a vf volts ta=25 ta=125 1.1 maximum dc reverse current at rated dc ir 5 a 50 el ec t r i ca l ch arac t er i s ti cs ( t a = 25 c unless otherwise noted ) parameter test conditions symbol l1a l4a l5a l6a l7a unit l2a l3a ta=125 i f =0.5a,i r =1.0a, i rr =0.25a typical junction capacitance 4.0 v, 1 mhz cj pf typical thermal resistance 1) juntion to mount r jm /w note:1),the thermal resistance from junction to mount,mounted on p.c.b with 88mm copper pads,2 oz,fr4 pcb blocking voltage 10 50 typical reverse recovery time t rr 1.8 us 6 www.goodark.com 1/4 2014.03-rev.a
l1a thru l7a surface mount glass passivated rectifier reverse voltage 50~1000v forward current 1a www.goodark.com 2/4 2014.03-rev.a ratings and characteristics curves ( ta = 25 unless otherwise noted ) figure ? 1.forward ? current ? derating ? curve figure ? 2.maximum non \ repetitive ? peak ? forward ? surge ? current figure ? 3. ? typical ? instantaneous ? forward ? characteristics ? figure ? 4. ? typical ? reverse ? characteristics ? www.goodark.com 2/4 2014.03-rev.a
l1a thru l7a surface mount glass passivated rectifier reverse voltage 50~1000v forward current 1a www.goodark.com 3/4 2014.03-rev.a package outline dimensions in inches (millimeters) dim min max min max unit: mm unit: inch min max min max a 0.92 1.08 0.036 0.043 a1 0 0.1 0.000 0.004 b 1.25 1.45 0.049 0.057 c 0.1 0.25 0.004 0.010 d 2.6 2.8 0.102 0.110 e 4.1 4.3 0.161 0.169 l 07 11 0028 0043 soldering ?? footprint l 0 . 7 1 . 1 0 . 028 0 . 043 he 4.8 5.2 0.189 0.205 packing information packing quantities: 10,000 pcs/reel 12mm tape, 13" reel tape & reel specification www.goodark.com 3/4 2014.03-rev.a
l1a thru l7a surface mount glass passivated rectifier reverse voltage 50~1000v forward current 1a www.goodark.com 4/4 2014.03-rev.a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer ? s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to suzhou good-ark electronics co ltd or a third party el ec t ron i cs c o., ltd .or a thi r d par t y. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party?s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. a ll information contained in these materials , includin g p roduct data , dia g rams , charts , p ro g rams all information contained in these materials , including product data , diagrams , charts , programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics c ltd ibilit f d li bilit th l ii f th co., ltd. assumes no responsibilit y fo r any damage, liability, o r othe r loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total diagrams , charts , programs , and algorithms , please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-rev.a
|