features surge overload rating -260 amperes peak ideal for printed circuit board reliable low cost construction utilizing molded plastic technique plastic material has u/l flammability classification 94v-0 mounting postition:any maximum ratings and electrical characteristics maximum recurrent peak reverse voltage v rrm v maximum rms voltage v rms v maximum dc blocking voltage v dc v maximum average forward (with heatsink note1) rectified current @ t c =100 (without heatsink) peak forward surage current 8.3ms single half sine-wave super imposed on rated load (jedec method) i 2 t rating for fusing (t<8.3ms) i 2 t a 2 s typical junction capacitance per element (note2) c j pf maximum forward voltage at 10.0a dc v f v maximum dc reverse current @ t j =25 at rated dc blocking voltage @ t j =125 typical thermal resistance r jc /w operating temperature range t j storage temperature range t stg notes: 1.device mounted on 100mm*100mm*1.6mm cu plate heatsink. 2.measured at 1.0mhz and applied reverse voltage of 4.0v dc. 3.the typical data above is for reference only( ? ). i r 10.0 -55 to +150 rev. 2, 18-aug-2015 a 500 2.2 -55 to +150 a 280 70 127 i fsm 260 i (av) 20.0 characteristics dimensions in inches and (milimeters) rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% symbol unit GBU2006L GBU2006L glass passivated reverse voltage - 600 volts forward current - 20 amperes bridge rectifiers 600 a 3.6 600 420 gbu .874(22.2) .860(21.8) .161(4.1) .213(5.4) .232(5.9) .126(3.2)*45 chamfer .720(18.3) .752(19.1) .720(18.29) .680(17.27) .073(1.85) .057(1.45) .035(0.9) .047(1.2) .100(2.54) .085(2.16) .065(1.65) .080(2.03) (5.3) (4.8) .210 .190 .190 .210 (4.8) (5.3) (5.3) (4.8) .210 .190 .133(3.37) .139(3.53) .091(2.3) .106(2.7) .022(.56) .018(.46) .401(10.2) .392(9.80) .437(11.1) .430(10.9) .134(3.4)
rating and charactertic curves GBU2006L the cruve graph is for reference only, can't be the basis for judgment( ? )! rev. 2, 18-aug-2015 instantaneous reverse current, microamperes fig.4-typical reverse characteristics percent of rated peak reverse voltage t j =25 c 10 1.0 0.1 0.01 0 40 60 80 100 120 140 20 fig.1-maximum forward surge current number of cycles at 60hz peak forward surge current amperes 400 350 300 250 200 1500 100 50 0 10 100 1 casw temperature averagr forward output current amperes fig.2- derating curve output rectified current 0 10 40 30 50 100 150 20 fig.5-typical junction capacitance reverse voltage,(volts) capacitance,(pf) 10.0 100 1.0 1.0 10 100 t j =25 c,f=1mhz instantaneous forward current, amperes 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1.0 10.0 20.0 0 0.2 fig.3-typical forward characteristics instantaneous forward voltage. volts t j = 25 c pulse width 300us
|
