total power international, inc. toll free: 877-646-0900(us) ph# 978-453-7272 www.total-power.com universal input ac-dc medical application open frame single & multi-output 19-20 watts internal switching power supplies TPMI19 series features: ? accommodate universal ac sources ? meet medical standard en 60601-1/ ul 2601-1 ? emi meet en 55011 & fcc class b ? ce marking compliance general specification efficiency: typ. 73%. switching frequency: typ. 67k hz. circuit topology: fixed-frequency flyback circuit. transient response: output voltage returns in less than 0.2ms following a 25% load change. safety standard: meet medical standards ul2601-1/ en 60601-1 class i. operating temperature: 0 to +50c. storage temperature: -20 to +85c. temperature coefficient: typ. 0.04% /c. cooling: free air convection. construction: l-bracket open frame format. power density: 3.3 watts / cubic inch. note: due to requests in market and advances in technology , specifications subject to ch ange without notification. specification input specification input voltage: 90-264vac typical. input connector: molex 5273 or equivalent. input frequency: 47-63hz. inrush current: 16a @ 230vac. input current: 0.4a@115vac & 0.22a@230vac. dielectric withstand: meet iec 60601-1. emi: meet en55011 & fcc class b. hold-up time: typ. 14ms @ 115vac. typ. 70ms @ 230vac. earth leakage: less than 0.10 ma. output specification output voltage: see ratings chart. output current: see ratings chart. output wattage: typ. 19-20w. output connector: molex 5273 or 41671. line regulation: typ. 0.2-1.0%. load regulation: main vo1 typ. 1.0%. aux. vo2 typ. 2-3.0%(stacked). aux. vo3 typ. 1-2.0%(p.r.). noise & ripple: typ. 1% peak to peak. ovp: built-in at main output vo1. adjustability: factory set. over load protection (olp): fully protected against overload or short circuit. typ. 120-150% max. load. consult the factory for special olp setting. in application total power international, inc.
total power international, inc. toll free: 877-646-0900(us) ph# 978-453-7272 www.total-power.com output voltage/current ratings chart mechanical dimensions: mm [inches] weight: 373.0g (13.2 oz.) single output main vo1@ model no . typ. volt. max. TPMI19-s033050 5.0a +3.3v 6.0a TPMI19-s050043 4.3a +5.0v 5.0a TPMI19-s120017 1.7a +12.0v 2.0a TPMI19-s240009 0.9a +24.0v 1.0a dual output main vo1@ aux. vo2 ? or model no . typ. volt, max. typ. volt. max. pk. TPMI19-d033i 4.0a +3.3v 5.0a 0.3a +12v 0.6a 1a TPMI19-d033m 4. 0a +3.3v 5 . 0a 0.3a +24v 0.5a 1a TPMI19-d050m 4. 0a +5.0v 5 . 0a 0.3a +24v 0.5a 1a TPMI19-d050i 4.0a +5.0v 5.0a 0.3a +12v 0.6a 1a triple output main vo1@ aux. vo2 ? aux. vo3 model no. typ. volt. max. typ. volt. max. pk. typ. volt. max. pk. TPMI19-t033ii 4.0a +3.3v 5.0a 0.5a +12v 1.0a 2a 0.3a +12v 0.6a 1a TPMI19-t033mi 4.0a +3.3v 5.0a 0.3a +24v 0.5a 1a 0.3a +12v 0.6a 1a TPMI19-t050ii 3.0a +5.0v 4.0a 0.5a +12v 1.0a 2a 0.3a +12v 0.6a 1a TPMI19-t050mi 3.0a +5.0v 4.0a 0.3a +24v 0.5a 1a 0.3a +12v 0.6a 1a TPMI19-t050kk 3.0a +5.0v 4.0a 0.4a +15v 0.8a 1a 0.3a -15v 0.6a 1a symbol: " " ovp built-in. "@" adjustable. " " installed with post regulator (p.r.). " ? " stacked-on main o/p. input & output connectors pin assignment ac input single output dual output triple output assignment ac-l ac-n ac-g vo1 n/a dc com. vo1 vo2 n/a dc com. vo1 vo2 vo3 dc com. cntr & pin # p1-l p1-n p1-g p2-2 p2-3 ,4 p2-1 p2-2 p2-4 p2-3 p2-1 p2-2 p2-3 p2-4 p2-1 mating connector: p1: molex 5195 or 5239 series. p2: molex 5195 or 5239 series/ 3069 series. total power international, inc.
|