11/13/2013 features ? for surface mounted applications in order to optimize board space ? low profile package ? built-in strain relief ? glass passivated junction ? low inductance ? excellent clamping capability ? repetition rate (duty cycle):0.01% ? fast response time: typically less than 1.0 ps from 0 volts to bv for unidirectional types ? typical ir less than 1a above 10v ? high temperature soldering: 250c/10 seconds at terminals ? plastic package has underwriters laboratory flammability classification 94 v-o mechanical data case: jedec do214ab. molded plastic over glass passivated junction terminals: solder plated, solderable per mil-std-750, method 2026 polarity: color band denoted positive end (cathode) except bidirectional standard packaging: 12mm tape (eia std rs-481) weight: 0.007 ounces, 0.21 grams) ratings at 25c ambient temperature unless otherwise specified. rating symbol value units peak pulse power dissipation on 10/1000 s waveform (note 1, 2, fig.1) i ppm see table 1 amps superimposed on rated load, (jedec method)(note2, 3) operatings and storage temperature range t j , t stg -55 +150 c notes: 1. non-repetitive current pulse, per fig.3 and derated above ta=25 c per fig.2. 2. mounted on copper pad area of 8.0mm x 8.0mm (20x20mm) per fig.5. 3. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum. certified rohs compliant ul file # e223026 devices for bipolar applications maximum ratings and characteristics for bidirectional use c or ca suffix for types smlj5.0 thru types smlj170 (e.g. smlj5.0c, smlj170ca) electrical characteristics apply in both directions. p ppm minimum 3000 watts peak pulse current of on 10/1000 s waveform (note 1,fig 3) i fsm 300 amps peak forward surge current, 8.3ms single half sine-wave surface mount transient voltage suppressor voltage-5.0 to 170 volts 3000 watt peak pulse power mde semiconductor, inc. 1-800-831-4881 email: sales@mdesemiconductor.com web: www.mdesemiconductor.com smlj series 78-150 calle tampico, unit 210, la quinta, ca., usa 92253 tel : 760-564-8656 ? fax : 760-564-2414 do-214ab (smc j-bend) 0.245 (6.22) 0.220 (5.59) 0.126 (3.20) 0.114 (2.90) 0.280 (7.11) 0.260 (6.60) cathode band 0.103 (2.62) 0.079 (2.06) 0.320 (8.13) 0.305 (7.75) 0.060 (1.52) 0.030 (0.76) dimensions in inches and(millimeters) 0.012 (0.305) 0.006 (0.152) 0.008 (0.203) max.
11/13/2013 rating and characteristic curves smlj series mde semiconductor, inc. 78-150 calle tampico, unit 210, la quinta, ca., usa 92253 tel : 760-564-8656 ? fax : 760-564-2414 1-800-831-4881 email: sales@mdesemiconductor.com web: www.mdesemiconductor.com 1 0 1 1 1 1 t f n o n n f 8 . f t 1 0 0 0 1 1 t f t - time(ms) 3.0 4.0 150 0 1.0 2.0 t r = 10sec . peak value i ppm t j = 25 c pulse width(td)is defined as the point where the peak current decays to 50% of i ppm 10/1000sec.waveform as defined by r.e.a. t d fig.3 - pulse waveform 4.0 50 half value - i ppm 2 100 i ppm - peak pulse current,% i rsm 3.0 0 0.1 1 10 100 1000 0.001m 0.0000001 .000001 0.00001 0.0001m t d - pulse width (sec.) fig. 1 - peak pulse power rating curve p ppm - peak pulse power (kw) non - repetitive pulse waveform shown in fig.3 t a = 25 c 1 100 10000 1000000 1 10 100 1000 c j - capacitance (pf) fig. 4 - typical junction capacitance v wm - reverse stand - off uni - directional v=ov p m(av) ,steady state power dissipation (w) 0 0 1.0 2.0 3.0 4.0 fig. 5 - steady state power derating curve t l - lead temperature ( c) 5.0 6.0 7.0 8.0 60hz resistive or inductive load 50 100 150 200 250 300 350 1 10 100 number of cycles at 60 hz fig.6 - maximum non - repetitive forward surge current uni - directional only 8.3ms single half sine - wave (jedec method)t j =t j max. i fsm - peak forward surge 0 12.5 25 37.5 50 62.5 75 87.5 100 0 25 50 75 100 125 150 175 200 fig.2 - pulse derating peak pulse power (p pp ) or current (i pp ) derating in t a - ambient temperature bi - directional v=ov uni - directional @v r bi - directional @v r
11/13/2013 3000 watt surface mount tvs uni bi smlj5.0a smlj5.0ca rde dde 5.00 6.40 7.00 10 9.2 326.1 800 smlj6.0a smlj6.0ca rdg ddg 6.00 6.67 7.37 10 10.3 291.3 800 smlj6.5a smlj6.5ca rdk ddk 6.50 7.22 7.98 10 11.2 267.9 500 smlj7.0a smlj7.0ca pdm ddm 7.00 7.78 8.60 10 12.0 250.0 200 smlj7.5a smlj7.5ca pdp ddp 7.50 8.33 9.21 1 12.9 232.6 100 smlj8.0a smlj8.0ca pdr ddr 8.00 8.89 9.83 1 13.6 220.6 50 smlj8.5a smlj8.5ca pdt ddt 8.50 9.44 10.40 1 14.4 208.3 20 smlj9.0a smlj9.0ca pdv ddv 9.00 10.00 11.10 1 15.4 194.8 10 smlj10a smlj10ca pdx ddx 10.00 11.10 12.30 1 17.0 176.5 5 smlj11a smlj11ca pdz ddz 11.00 12.20 13.50 1 18.2 164.8 5 smlj12a smlj12ca pee dee 12.00 13.30 14.70 1 19.9 150.8 5 smlj13a smlj13ca peg deg 13.00 14.40 15.90 1 21.5 139.5 5 smlj14a smlj14ca pek dek 14.00 15.60 17.20 1 23.2 129.3 2 smlj15a smlj15ca pem dem 15.00 16.70 18.50 1 24.4 123.0 2 smlj16a smlj16ca pep dep 16.00 17.80 19.70 1 26.0 115.4 2 smlj17a smlj17ca per der 17.00 18.90 20.90 1 27.6 108.7 2 smlj18a smlj18ca pet det 18.00 20.00 22.10 1 29.2 102.7 2 smlj20a smlj20ca pev dev 20.00 22.20 24.50 1 32.4 92.6 2 smlj22a smlj22ca pex dex 22.00 24.40 26.90 1 35.5 84.5 2 SMLJ24A smlj24ca pez dez 24.00 26.70 29.50 1 38.9 77.1 2 smlj26a smlj26ca pfe dfe 26.00 28.90 31.90 1 42.1 71.3 2 smlj28a smlj28ca pfg dfg 28.00 31.10 34.40 1 45.4 66.1 2 smlj30a smlj30ca pfk dfk 30.00 33.30 36.80 1 48.4 62.0 2 smlj33a smlj33ca pfm dfm 33.00 36.70 40.60 1 53.3 56.3 2 smlj36a smlj36ca pfp dfp 36.00 40.00 44.20 1 58.1 51.6 2 smlj40a smlj40ca pfr dfr 40.00 44.40 49.10 1 64.5 46.5 2 smlj43a smlj43ca pft dft 43.00 47.80 52.80 1 69.4 43.2 2 smlj45a smlj45ca pfv dfv 45.00 50.00 55.30 1 72.7 41.3 2 smlj48a smlj48ca pfx dfx 48.00 53.30 58.90 1 77.4 38.8 2 smlj51a smlj51ca pfz dfz 51.00 56.70 62.70 1 82.4 36.4 2 smlj54a smlj54ca pge dge 54.00 60.00 66.30 1 87.1 34.4 2 smlj58a smlj58ca pgg dgg 58.00 64.40 71.20 1 93.6 32.1 2 smlj60a smlj60ca pgk dgk 60.00 66.70 73.70 1 96.8 31.0 2 smlj64a smlj64ca pgm dgm 64.00 71.10 78.60 1 103.0 29.1 2 smlj70a smlj70ca pgp dgp 70.00 77.80 86.00 1 113.0 26.5 2 smlj75a smlj75ca pgr dgr 75.00 83.30 92.10 1 121.0 24.8 2 smlj78a smlj78ca pgt dgt 78.00 86.70 95.80 1 126.0 23.8 2 smlj85a smlj85ca pgv dgv 85.00 94.40 104.00 1 137.0 21.9 2 smlj90a smlj90ca pgx dgx 90.00 100.00 111.00 1 146.0 20.5 2 smlj100a smlj100ca pgz dgz 100.00 111.00 123.00 1 162.0 18.5 2 smlj110a smlj110ca phe dhe 110.00 122.00 135.00 1 177.0 16.9 2 smlj120a smlj120ca phg dhg 120.00 133.00 147.00 1 193.0 15.5 2 smlj130a smlj130ca phk dhk 130.00 144.00 159.00 1 209.0 14.4 2 smlj150a smlj150ca phm dhm 150.00 167.00 185.00 1 243.0 12.3 2 smlj160a smlj160ca php dhp 160.00 178.00 197.00 1 259.0 11.6 2 smlj170a smlj170ca phr dhr 170.00 189.00 209.00 1 275.0 10.9 2 for bidirectional type having vrwm of 10 volts and less, the ir limit is double for parts without a, the vbr is 10% certified rohs compliant ul file # e223026 maximum clamping voltage @i pp v c (v) uni-polar bi-polar device marking code reverse standoff voltage v rwm (v) 78-150 calle tampico, unit 210, la quinta, ca., usa 92253 tel : 760-564-8656 ? fax : 760-564-2414 mde semiconductor, inc. 1-800-831-4881 email: sales@mdesemiconductor.com web: www.mdesemiconductor.com peak pulse current i pp (a) reverse leakage @ v rwm i r (a) breakdown voltage v br (v) min. @ i t breakdown voltage v br (v) max. @ i t test current (i t ) ma
|
