cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 1/9 MTN2510J3 cystek product specification n-channel enhancement mode power mosfet MTN2510J3 bv dss 100v i d 50a 19m v gs =10v, i d =30a r dson(typ) 23m v gs =6v, i d =20a features ? low gate charge ? simple drive requirement ? repetitive avalanche rated ? fast switching characteristic ? pb-free lead plating and halogen-free package symbol outline ordering information device package shipping MTN2510J3-0-t3-g to-252 (pb-free lead plating an d halogen-free package) 2500 pcs / tape & reel to-252(dpak) MTN2510J3 g gate g d s d drain s source environment friendly grade : s for rohs compliant products, g for rohs compliant and green compound products packing spec, t3 : 2500 pc s / tape & reel, 13? reel product rank, zero for no rank products product name
cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 2/9 MTN2510J3 cystek product specification absolute maximum ratings (t c =25 c, unless otherwise noted) parameter symbol limits unit drain-source voltage v ds 100 gate-source voltage v gs 20 v continuous drain current @ t c =25 c, v gs =10v i d 50 continuous drain current @ t c =100c, v gs =10v i d 35 pulsed drain current (note 1) i dm 150 avalanche current i as 30 a avalanche energy @ l=0.1mh, i d =30a, r g =25 e as 45 repetitive avalanche energy@ l=0.05mh (note 2) e ar 22.5 mj t c =25 c 130 power dissipation t c =100 c p d 65 w operating junction and storage temperature tj, tstg -55~+175 c note : 1. pulse width limited by maximum junction temperature 2. duty cycle 1% thermal data parameter symbol value unit thermal resistance, junction-to-case, max r th,j-c 1.15 c/w thermal resistance, junction-to-ambient, max r th,j-a 75 c/w characteristics (t c =25 c, unless otherwise specified) symbol min. typ. max. unit test conditions static bv dss 100 - - v v gs =0v, i d =250 a v gs(th) 2.0 3 4.0 v v ds = v gs , i d =250 a g fs - 38 - s v ds =5v, i d =30a i gss - - 100 na v gs = 20 - - 1 v ds =80v, v gs =0v i dss - - 25 a v ds =70v, v gs =0v, tj=125 c - 19 30 v gs =10v, i d =30a *r ds(on) - 23 35 m v gs =6v, i d =20a dynamic *qg - 24 - *qgs - 6.5 - *qgd - 8.1 - nc i d =30a, v ds =50v, v gs =10v *t d(on) - 20 - *tr - 100 - *t d(off) - 100 - *t f - 55 - ns v ds =50v, i d =1a, v gs =10v, r g =6
cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 3/9 MTN2510J3 cystek product specification ciss - 2003 - coss - 218 - crss - 128 - pf v gs =0v, v ds =25v, f=1mhz rg - 2 - v gs =15mv, v ds =0v, f=1mhz source-drain diode *i s - - 50 *i sm - - 150 a *v sd - - 1.3 v i f =i s , v gs =0v *trr - 120 - ns *qrr - 380 - nc i f =25a, v gs =0, di/dt=100a/ s *pulse test : pulse width 300 s, duty cycle 2% recommended soldering footprint
cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 4/9 MTN2510J3 cystek product specification typical characteristics typical output characteristics 0 20 40 60 80 100 120 024681 0 brekdown voltage vs ambient temperature 0.4 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) bv dss , normalized drain-source breakdown voltage v ds , drain-source voltage(v) i d , drain current (a) 10v,9v,8v,7v,6v,5v,4v v gs =3v v gs =2v i d =250 a, v =0v gs static drain-source on-state resistance vs drain current 10 100 1000 0.01 0.1 1 10 100 i d , drain current(a) r ds(on) , static drain-source on-state resistance(m) v gs =2v v gs =2.5v v gs =3v v gs =4.5v v gs =10 reverse drain current vs source-drain voltage 0.2 0.4 0.6 0.8 1 1.2 0246810 i dr , reverse drain current(a) v sd , source-drain voltage(v) v gs =0v tj=25c tj=150c static drain-source on-state resistance vs gate-source voltage 0 40 80 120 160 200 02468 v gs , gate-source voltage(v) r ds(on) , static drain-source on- state resistance(m) 10 drain-source on-state resistance vs junction tempearture 0 0.4 0.8 1.2 1.6 2 2.4 -60 -20 20 60 100 140 180 tj, junction temperature(c) r ds(on) , normalized static drain- source on-state resistance i d =20a v gs =10v, i d =30a r ds( on) @tj=25c : 19m
cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 5/9 MTN2510J3 cystek product specification typical characteristics (cont.) threshold voltage vs junction tempearture 0.2 0.4 0.6 0.8 1 1.2 1.4 -60 -20 20 60 100 140 tj, junction temperature(c) v gs(th) , normalized threshold voltage i d =250 a capacitance vs drain-to-source voltage 10 100 1000 10000 0.1 1 10 100 v ds , drain-source voltage(v) capacitance---(pf) c oss ciss crss forward transfer admittance vs drain current 0.01 0.1 1 10 100 0.001 0.01 0.1 1 10 i d , drain current(a) g fs , forward transfer admittance(s) ta=25c pulsed v ds =5v gate charge characteristics 0 2 4 6 8 10 0 5 10 15 20 25 30 35 40 qg, total gate charge(nc) v gs , gate-source voltage(v) i d =30a v ds =50v v ds =25v maximum safe operating area 0.01 0.1 1 10 100 1000 0.1 1 10 100 1000 v ds , drain-source voltage(v) i d , drain current(a) t c =25c, tj=175c v gs =10v, jc =1.15c/w single pulse dc 100ms r dson limited 1s 100 s 1ms 10ms maximum drain current vs case temperature 0 10 20 30 40 50 60 25 50 75 100 125 150 175 200 t c , case temperature(c) i d , maximum drain current(a) v gs =10v, r jc =1.15c/w
cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 6/9 MTN2510J3 cystek product specification typical characteristics (cont.) typical transfer characteristics 0 20 40 60 80 100 120 024681012 v gs , gate-source voltage(v) i d , drain current(a) v ds =5v single pulse power rating, junction to case 0 100 200 300 400 500 600 700 800 900 1000 0.1 1 10 100 1000 pulse width(s) power (w) t j(max) =175c t c =25c jc =1.15c/w transient thermal response curves 0.001 0.01 0.1 1 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 t 1 , square wave pulse duration(s) r(t), normalized effective transient thermal resistance single pulse 0.01 0.02 0.05 0.1 0.2 d=0.5 1.r jc (t)=r(t)*r jc 2.duty factor, d=t 1 /t 2 3.t jm -t c =p dm *r jc (t) 4.r jc =1.15c/w
cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 7/9 MTN2510J3 cystek product specification reel dimension carrier tape dimension
cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 8/9 MTN2510J3 cystek product specification recommended wave soldering condition soldering time product peak temperature pb-free devices 5 +1/-1 seconds 260 +0/-5 c recommended temperature profile for ir reflow pb-free assembly profile feature sn-pb eutectic assembly average ramp-up rate 3 c/second max. 3 c/second max. (tsmax to tp) preheat 100 c 150 c ? temperature min(t s min) ? temperature max(t s max) 150 c 200 c ? time(ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: ? temperature (t l ) 183 c 217 c ? time (t l ) 60-150 seconds 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak 10-30 seconds 20-40 seconds temperature(tp) ramp down rate 6 c/second max. 6 c/second max. 6 minutes max. 8 minutes max. time 25 c to peak temperature note : all temperatures refer to topside of t he package, measured on the package body surface.
cystech electronics corp. spec. no. : c741j3 issued date : 2009.09.21 revised date :2013.12.26 page no. : 9/9 MTN2510J3 cystek product specification to-252 dimension marking: style: pin 1.gate 2.drain 3.source 4.drain 3-lead to-252 plastic surface mount package cystek package code: j3 device name date code 2510 1 2 3 4 inches millimeters inches millimeters dim min. max. min. max. dim min. max. min. max. a 0.087 0.094 2.200 2.400 e 0.086 0.094 2.186 2.386 a1 0.000 0.005 0.000 0.127 e1 0.172 0.188 4.372 4.772 b 0.039 0.048 0.990 1.210 h 0.163 ref 4.140 ref b 0.026 0.034 0.660 0.860 k 0.190 ref 4.830 ref b1 0.026 0.034 0.660 0.860 l 0.386 0.409 9.800 10.400 c 0.018 0.023 0.460 0.580 l1 0.114 ref 2.900 ref c1 0.018 0.023 0.460 0.580 l2 0.055 0.067 1.400 1.700 d 0.256 0.264 6.500 6.700 l3 0.024 0.039 0.600 1.000 d1 0.201 0.215 5.100 5.460 p 0.026 ref 0.650 ref e 0.236 0.244 6.000 6.200 v 0.211 ref 5.350 ref notes: 1.controlling dimension: millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material: ? lead : pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0. important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance .
|
