oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 819-if70.0m-ra 70.0 mhz if saw filter 1.30 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 819-if70.0m-ra january 2011 rev a 70.0 mhz if saw filter 1.30 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i ground j input e output test fixture & values input l1 = 470 nh output l2 = 470 nh source/load impedance 50 ?
oscilent part number 819-if70.0m-ra january 2011 rev a 70.0 mhz if saw filter 1.30 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 69.95 70.00 70.05 insertion loss at fo db - 20.0 22.0 absolute delay at fo usec - 2.6 - phase linearity o rms - 1.54 2.00 amplitude ripple variation at fo0.5mhz db - 0.8 1.0 bandwidth at -1db mhz 1.26 1.30 - bandwidth at -40db mhz - 2.36 - relative attenuation at fo1.25mhz db 40 45 - at fo1.7mhz db 40 45 - ultimate rejection db 40 50 - temperature coefficient ppm/c - -0.03 -
oscilent part number 819-if70.0m-ra january 2011 rev a 70.0 mhz if saw filter 1.30 mhz bandwidth product specification p. 3 www.oscilent.com frequency response horizontal: 0.5 mhz/div vertical: 10 db/div horizontal: 0.2mhz/div vertical: 1 db/div vertical: 100 ns/div
|